Top Rs232 Module Board Reviews

DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control

  • BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
  • When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

DSD TECH SH-B23A Bluetooth 2.0 to RS232 Serial Adapter with DB9 Converter

  • Bluetooth RS232 Adapter : With this Bluetooth RS232 adapter, you can wirelessly communicate with any RS232 devices on Android smartphones or a Bluetooth enabled computer..
  • Built-in Industrial Bluetooth 2.0 SPP module driven by the CSR BC417 chip. Compatible with Android phones and Bluetooth enabled computers, but not compatible with any iOS device..
  • RS232 DB9 Interface: Please note that only Rx and Tx signals are valid. Does not support CTS, RTS hardware flow control..
  • Bluetooth pairing PIN: 1234, Baud rate parameters: 9600, N, 8, 1. Transmission distance of more than 20 meters.Baud rate and Bluetooth name and PIN can be configured by software. DSD TECH provides setup software for free..
  • About WARRANTY: DSD TECH offers a one-year warranty and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours..
Check Stock

Fortin EVO-Key Universal Immobilizer Bypass Module

  • 2x on-board LEDs for simplified programming & diagnostics.
  • 1x preloaded firmware for maximum compatibility.
  • Self-learning algorithm automatically detects the vehicle during programming & adjusts accordingly.
  • Includes EVO-KEY module, immobilizer harness, primary relay harness, datalink RS-232 harness & wire-color data card.
Check Stock

DaFuRui 5PCS MAX3232 RS232 to TTL Converter 3.3V to 5V DB9 Female RS232 Serial Prot to TTL Converter Module Root Connector for Equipment Upgrades Like DVD

  • ★MAX3232 3.3V to 5V DB9 Male RS232 Serial Prot to TTL Converter Module..
  • ★Program the type of microcontroller: STC/STM32 / NXP / Renesas MCU / NEC..
  • ★Used in radio modification,mobile phone brushing,XBOX360 brushing machine,GPS,DVD brushing, hard disk repair,set-top box upgrade..
  • ★Package Include:5PCS x MAX3232 RS232 to TTL Serial Port Converter Module and 20pcs Dupont Lines..
Check Stock

Bluetooth Serial Port Transceiver Baseboard, HC-05 Wireless Bluetooth Transceiver Module, Mini Low Power Consumption

  • Enhanced data rate (EDR) conforms to the 2Mbps and 3Mbps modulation modes of the V2.0.E.2 specification..
  • Support Bluetooth connection through AT command, set baud rate, password, save parameters after setting parameters..
  • Bluetooth UART RS232 serial converter module for easy transfer of UART data..
  • On board 3.3V regulator chip, ROHS compliant, compact size..
  • Full speed Bluetooth operation, support for full Piconet and Scatternet..
Check Stock

4x8 HDR 18GBPS HDBT 4K Matrix SWITCHER 4x4 with 4 Receivers HDMI 2.0a 2.0 CAT6 CAT5e HDMI HDCP2.2 Routing SPDIF Audio CONTROL4 Savant Home Automation

  • 4 HDBT Receivers with PoC, Bi-Directional IR, and Bi-Directional RS232 Serial.
  • 18GBPS HDR 4K 60hz YUV444 with 4K to 1080p downscaling. Supports all forms of surround sound including Dolby Atmos, Dolby Surround, 5.1 - 7.1 - 11.1 - 5.2 - 7.2 - 11.2, 2 Channel Stereo.
  • iOS & Android App!! Includes 4 HDBT PoC Receivers (230ft Distance Range) that don't need any additional power.
  • RS232, IP, and IR Remote Control! Guaranteed compatibility with Crestron, Savant, Control, or any other RS232 system. We have a Crestron, Control4, URC, and Simple Control module available for free!.
  • 4 HDMI source devices (BluRay, Apple TV) switched to 8 HDBT & HDMI output destinations (TVs, Projectors).
Check Stock

USB to TTL Adapter USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

  • Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
  • POW(power), RXD/TXD transceiver communication LED indicator....
  • Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
  • Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
  • You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....
Check Stock

USB to RS232/RS485/TTL Industrial Isolated Converter with Original FT232RL Inside,ADI magnetical Isolation TVS diode,Industrial Equipment for high Communication Requirements or Applications

  • Support USB to RS232, USB to RS485, USB to TTL (UART) communication.
  • ADI board integrally coupled magnetically isolated, a signal can be isolated, high reliability, strong anti-interference, low power consumption.
  • High-quality USB-B and RS232 interface materials, smooth plugging and unplugging, firm and reliable.
  • Original FT232RL, high-speed communication is stable, reliable, and compatible.
  • Onboard TVS (transient voltage suppression tube), can effectively suppress the surge voltage and transient spike voltage in the circuit, lightning....
Check Stock

SamIdea 2 Pin 3 Pin PCB Mount Screw Terminal Block Connectors,Socket Strips 5.08mm Pitch for Arduino (Pack of 60pcs)

  • ★★★★★ REMINDS: You can separately buy 2 pin or 3 pin from our store,with ASIN: B07DQKSPWC(2PIN) and ASIN: B07DQTG6W5(3PIN). Application: Crystal Oscillator, IC Socket, DIY PCB Universal Board, Dupont Line, Digital tube, buzzer, Compatible with Arduino UNO board, PIC Programming unit, AVR ATMEL Programming unit, Connector Kit, USB to TLL Modules, Power Modules, LCD Modules, RS232 TO TLL Module.
  • ★★★★★ Rated Value : AC 300V, 16A,Pin Number :2&3(Mixed).
  • ★★★★★ Material : ABS Plastic, Electric Parts.
  • ★★★★★ Net Weight : Approx.179g.
  • Package Content : 30x 2P+30x 3p PCB Terminal Block.
  • ★★★★★ 100% satisfaction guarantee.
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

NEO-6M GPS Module GY-GPS6MV2 NEO6MV2 Buit-in EEPROM APM2.5 Antenna RS232 TTL Board for Arduino Flight Control 3V-5V Good

  • GPS Module NEO6MV2 Buit-in EEPROM APM2.5 Antenna RS232 TTL Board.
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

  • Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
  • Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
  • Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
  • 1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
  • Configure Via Web Browser or Virtual Com Software Interface.
  • Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
  • What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..
Check Stock