Top Router Table Set ups Reviews

Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock

2351208mm Router Table Plate Craftsman Router Table Insert Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches

  • Easy installation -- A convenient center hole bushing that aligns the router so that it can centered on the drill hole.Drill and install router easily....
  • Material -- A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Router plate....
  • Wide Use -- Multi-function insert plate,suitable for making its own boring and milling table,suitable for high-precision woodworking.It is easy to....
  • Safety -- Inverting your router in a router table allows for safer and more versatile operations..
  • Size -- 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in. This router table insert plate can be used in....
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

Rockler Pro Lift Router Lift - 9-1/4 x 11-3/4 Large Router Plate – Router Lift Kit For Kreg Jessum Woodpecker & Peachtree - Router Lift Systems w/Router Plate Insert Ring & Set of Hex Keys

  • Router Table Lift: Raise your woodworking to a new level with this pro lift router tool. Our Rockler router lift 9.25” x 11.75” plate is ideal for....
  • Adjust The Height: Use the fine adjustment gear to set the final height to within 0.001''. All this is achieved more quickly, more efficiently, and....
  • Fits Most Routers: This woodworking router table works with router motors with a 4.2'' diameter (13.85'' circumference), like the Porter-Cable 7518....
  • Easy Router Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock....
  • What’s Included? Our pro lift includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Router Ring (1-1/2'' I.D.),....
Check Stock

Rockler Router Bit Set Up Jigs for 45 Degree Lock Miter Bits – Jig Works for 3/4” Stock on One Side & 5/8” on Other – High-Quality HDPE Miter Router Bit - Lock Miter Router Bit Measure 2' x 3-7/8' x 3/4'

  • Set Up for 45° Miter Lock Router Bit: The Rockler router bit set up jig helps to set your miter lock bit to the precise height every time for accurate lock miter joints!.
  • Designed To Work With: This router jig works for 3/4" stock on one side and 5/8" stock on the other..
  • High-Quality Material: Our lock miter router bit jig is made of durable HDPE and this lock miter bit measures 2" x 3-7/8" x 3/4"..
  • Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precisely Machined Setup aid and no test cuts required. This woodworking jig helps to adjust a bit. Make life easier!!.
  • Keep Hands Clear Of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and bottom of router collet. Keep your hands clear of bit..
Check Stock

Rockler Retrofit Double Featherboard Kit

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock

POWERTEC 71553 Table Saw Fence Featherboard – 2 Pack

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock

XtremepowerUS Deluxe Bench Top Aluminum Electric Router Table Wood Working On/Off Swtich Craft DIY Benchtop (34\ x 13\) -Black

  • 【Extra Large Extension Table to the Main Table】Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface, helping you complete routing projects better..
  • 【Retractable Guard and Suits Most Router Bits】There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works..
  • 【Multifunctional Fence and Exact Miter Gauge】The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles..
  • 【Selected Material and Rugged Durable Frame】Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability..
Check Stock

QYQRQF Router Plate, Aluminum Router Table Plate for Woodworking Router Table Insert Plate for Trim Routers Wood Trimming Milling Tools with Accessories (Red）

  • Material: The router table insert plate is made of heavy duty aluminum, which could be used for years without rust or deformation..
  • Thoughtful Design: The table top mounting plate is designed with inches and centimeter two measurements fit for trim routers. What’s more, the router plate is made with adjustable holes, which could fit for different brands routers. You could also drill holes as needed..
  • A Set of Tools: The insert table plate is coming with 4 different router insert rings and screws, it could satisfy different needs and woodworking..
  • Multi-function: No maters you are a woodworker or a DIY fan for small projects, the aluminum router table insert plate could be a good helper for your woodworking..
  • Important: Please do pay attention to the size of the router in the detail product picture, to make sure the insert plate could fit for your routers. Any question on product, we could help to solve within 24 hours..
Check Stock

KOWOOD Pro Roundover Bit Set 4 Pcs, 1/4 Inch Shank, R:1/8\

  • KOWOOD Pro Roundover router bit set is an upgraded new product. Which is specifically designed for the high quality demanded by woodworking industrial application..
  • KOWOOD PRO C3 carbide with a new process of heat treatment shank support this set of bits in heavy-duty and maximum durability..
  • Precisely machined carbide for clean and accurate trimming, grooving for all types of wood material..
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel..
  • Universal 1/4” Shank is suitable for all major benchtop router table such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter & Cable, Skil, Ryobi, Black & Decker. (Benchtop router table use only)..
Check Stock

SKIL RAS900 Router Table

  • Accessory storage containers protect and store accessories with router table.
  • RAS900 comes with 2 containers and includes quick clamp system.
  • 2 feather-boards help guide work-piece for more accurate routing.
  • Bit height gauge helps simplify set-up and improves accuracy of cuts.
  • Starter pin and guard help support work-piece when routing curved edges.
  • Router mounting with easy bit changes and no leveling required.
Check Stock