Top Round Insert Reviews

Hicarer 3-1/8 Inch (80 mm) Clock Insert Fit Diameter 3.0 inch (76 mm) Hole (Gold)

  • Overall dimension: the overall diameter of the craft clock insert is 3-1/8 inch (80 mm) that refers to the front face outside maximum diameter, including the colored bezel.
  • Unique design: the quartz clock insert features a cute colored trim, clear plastic lens and black Arabic numerals on white dial for easy reading.
  • Mounting diameter: fit for 3.0 inch/ 76 mm diameter round hole.
  • Mounting depth is 0.7 inch/ 18 mm, suitable for crafts or replacing old clock faces.
  • Rubber band: wall clock with rubber band gasket to securely hold the insert in place, which allow for slight irregularity in the hole.
  • Power: round clock insert requires 1 piece AA battery (not included).
  • Warm note: clock is intended for indoor use only, not weather resistant.
Check Stock

Cemetery Vases with Foam ,In Ground Vases for Cemetery with Spikes,Plastic Flower Holder for Cemetery Grave (2 Piece)

  • Unique Drainage Design: Our memorial cemetery floral holder with special large hollow design that makes with stand harsh rainstorms,and foam insert keep flowers upright, make our flower holder become more aesthetic than the common cone vase..
  • Extra-Long Stake: Our plastic floral holder features 5.3 inch extra long support stake, longer than usual vases. It will keep insert more sturdily in your lawn and high winds won't blow your flowers over, keep your love stays longer time..
  • High Quality & Weatherproof：Made of durable polypropylene, each vase with 11 inches long spike stake, opening diameter is approximately 2.4 inches wide, that perfect for long-term use..
  • Easy to Use: There is a round hole at the bottom of the square vase, just put the round side of the support stake through the round hole to bring the two parts together, then insert the sharp side into the lawn and place the flower into the foam insert above..
  • Multiple Uses: Our flower holder great for offer a secure spot for memorial bouquets. it can be used not only for funerals, cemeteries and graveyards, but also for decorating outdoor parties and special event..
Check Stock

MindShift Gear Filter Nest Storage Case

  • Fits 8 round filters (up to 82 mm) including 2 variable NDs in orange divider, step up/down rings, cleaning cloth, lens caps, lens pen and more..
  • The padded, zippered pouch provides optimum protection in the field.
  • The "removable insert" is ideal for compact packing.
  • Color-coding improves organization, fits 8 round filters including 2 variable NDs, and eliminates plastic cases in the bag.
  • External pouch: 8.1" W x 4.3" H x 3.0" D (20.5 x 11 x 7.5 cm), Removable filter insert: 7.3" W x 3.7" H x 1.8" D (18.5 x 9.5 x 4.5 cm), Round filter slots: 3.4" W x 3.5" H (8.6 x 9.0 cm), Weight: 0.4 lbs (0.2 kg).
Check Stock

Mini Quartz Clock Insert 2.8 Inch (70 mm) Round Quartz Movement Miniature Clock White Dial Gold Trim Arabic Numerals, Fit 2.4 Inch (61 mm) Diameter Hole

  • ✔️ Overall Outside Diameter: 2.8 inch (70 mm).This is the outside diameter of the round face desk clock insert. Mounting depth: 0.7 inch (17 mm)..
  • ✔️Fit round hole diameter(mounting diameter): 2.4 inch (61 mm): This is the insert diameter of the opening that the clock fits in. You can use this clock insert with delicate floral symmetry design to make clock crafts. Quartz Movement Clock Insert has a rubber band gasket to securely hold the clock face in place..
  • ✔️ Appearance: The insert clock features smooth surface and gold bezel with exquisite workmanship. The craft clock insert is designed with black arabic numerals with circle marking on the dial plate for easy reading..
  • ✔️ High quality: This mini clock is your good choice to make crafts or use it as a nice gift. Perfect for home, kitchen, office,etc. With a hole at the back of the clock, it allows you to hang it on the wall or other decor items..
  • ✔️ Compatible clock: Miniature clock fitup Insert replacement fits in many types of small glass & crystal clocks quartz movement. Great for crafts or replacing old clock faces. NOTE:BATTERY IS NOT INCLUDED (Requires 1 piece 1.5V AAA Battery)..
Check Stock

Round Plastic Threaded Tube Inserts - 4 Pack Threaded 1\(OD) Round Plastic Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts Round Tubing Inserts

  • 4 Pack Round Plastic Threaded Tube Inserts, Threaded Tube Ends.
  • Round Tubing Threaded Insert fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Threaded Round Plastic Tubing Insert with 1/4-20 metal threads that supports for smooth and frequent adjustments.
  • Threaded Inserts for Round Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

COMOK Red 5pcs 38mm Diameter 10mm Hole Diameter Mounded Threaded Handling Round Ball Knob

  • Phenolic Round Ball Knob has a Brass Threaded Insert. The smooth surface gives a dressed-up finished appearance..
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles..
  • high quality phenolic plastic female threaded knobs for durability and long service life.
  • Threaded brass insert knobs are good for control levers and push-pull rods..
  • Black Plastic Round Ball Knob Handle make it an ideal replacement knob for machine handles.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 540 sfm(480-650), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 690 sfm(610-840), fnz 0.016 in(0.009-0.022).
Check Stock

Bakelite Ball Knob Ball Handle with M5 M6 M8 M10 M12 M16 Female Thread Brass Insert(M6x20(1pcs))

  • Phenolic Round Ball Knob has a Brass Threaded Insert. The smooth surface gives a dressed-up finished appearance..
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles..
  • high quality phenolic plastic female threaded knobs for durability and long service life.
  • Threaded brass insert knobs are good for control levers and push-pull rods..
  • Black Plastic Round Ball Knob Handle make it an ideal replacement knob for machine handles.
Check Stock

Mudder 1-7/16 Inch (36 mm) Clock Insert Fit Diameter 1-3/8 Inch (35 mm) Hole, Arabic Numerals (Gold Bezel)

  • Clock insert size: mini round quartz clock insert overall diameter about 1-7/ 16 inch (36 mm).
  • Fit diameter: mounting diameter: 1-3/ 8 inch (35 mm), mounting depth: 1/ 4 inch (6 mm), fit round hole diameter: 1-3/ 8 inch (35 mm).
  • Long life battery: build-in long life battery, it can be applied for about 2 years, simple and convenient, you don't need to buy battery specifically.
  • White dial with black arabic numeral: dial features a white background, black metal hands, black arabic numerals, non-ticking, quiet and smooth sweeping movement of clock hands.
  • Broadly suitable: this clock movement insert with Japanese PC 21 clock movement fits in many popular glass and craft clocks on the market.
Check Stock

1-1/2 inch Round Cup Patio Furniture Insert Glide End Black Cap for Outdoor Wrought Iron Tables Chairs - 25 Pack

  • ► Various Usage – Patio chair insert slides over the floor, and Provides you smoother movement of furniture..
  • ► 1-1/2″ Patio Chair Glide – MEASURE inner diameter of chair or table foot cup BEFORE ordering – and the diameter is 1.5 inches..
  • ► Non-Scratching – Patio chair glide will not leave marks on your patio surface, and Protects your patio surface, patio chair feet and patio legs from damage..
  • ► Heavy Duty Round Cup Insert – Put deluxe round cup Insert on the bottom of the chair or table feet of wrought iron furniture..
  • ► 100% SATISFACTION GUARANTEE – If you have any questions, please feel free to contact us to get immediately reply. We want our customers to be 100% satisfied.
Check Stock

Rearz - Dinosaur - Bamboo Luxury Adult Pocket Diaper

  • ✅ ONE-SIZE FITS MOST: Waist range 29 – 49 inches, best fit 33 – 42 inches.
  • ✅ OUTSTANDING LEAK PROTECTION: Features double leg gussets for the ultimate protection.
  • ✅ WATERPROOF AND BREATHABLE: The outer shell is both waterproof and breathable, making these comfortable all year round.
  • ✅ LUXURY THROUGHOUT: Features a luxury bamboo inner and thirsty insert.
  • ✅ BOOSTER/INSERT INCLUDED: One bamboo insert included.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC1125 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Steel - fnx 0.006 in/r(0.003-0.008), vc 560 sfm(500-680), fnz 0.016 in(0.009-0.022).
  • Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 455 sfm(405-550), fnz 0.016 in(0.009-0.022).
  • Super-alloys & Titanium - fnx 0.006 in/r(0.003-0.008), vc 105 sfm(95-130), fnz 0.016 in(0.009-0.022).
  • Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 390 sfm(350-460), fnz 0.016 in(0.009-0.022).
Check Stock