Top Roofing Screws Reviews

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

• Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
• Metal Screws are painted to closely match many brands of metal roofing though color may vary.
• Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• #10 Sheet Metal roofing screws are galvanized for corrosion resistance.

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
• Metal Screws are painted to closely match many brands of metal roofing though color may vary.
• Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
• Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.

Dripping In Chocolate

• Built in easy to install 5 FT sections. 4" leg goes under the shingle with 1.5" hemmed edge on the fascia..
• Matching 1.5" metal roofing screws, 1/4" hex bit driver, and gloves included with each order..
• 75 degree angle fits most roof pitches with ease. Made from 26 Gauge metal roofing material with 40 year paint finish..
• Custom sizes and shapes available. Shipping is free. All orders are shipped out same or next business day..

PeakWorks Roof Anchor Bracket, Fall Arrest System, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit, ANSI OSHA Compliant, Durable Steel Adjustable Connector, Red, V8229100

• SAFETY CERTIFICATIONS – Temporary roof anchor bracket meets ANSI Z359 18, CSA Z259 15, and OSHA safety requirements for residential and commercial roofing applications, ensuring your safety in the most dangerous conditions.
• REUSABLE ROOFING TOOLS – Re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit.
• roof anchor connects to wood surfaces with a screw size of 3" x #10 (32 screws / 16 per side).
• SUPERIOR QUALITY – Anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments.
• STRONG CAPACITY – Hinged roof bracket built with a minimum tensile strength of 5,000 lb. and has a 310 lb. weight capacity.
• COMPATIBILITY – PeakWorks Roof Anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product.

Metal Roofing Screw: (250) 12 x 1-1/2' ZINC Hex ReGrip Sheet Metal Roof Screw. Sharp Point Metal to Wood siding Screws. 9/16' EPDM Washer.

• 5/16" Hex Head - ~9/16" EPDM washer - .216" Shaft (#12) Width .625" - Length 1-1/2" Under Head.
• ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened.
• These screws should be used when replacing smaller nails or screws in roofing or siding projects.
• Galvanized Screws are Grey in color due to the galvanizing process (no paint).
• Due to error in Manufacturing Process you may receive these with a 1/4" Head and 5/8" EPDM washer..

DEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite

• Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
• Continuous Service Temperature Ranges of -58F to 239F (EPDM).
• Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
• Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
• EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.

#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing

• Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
• Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
• Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.

National Nail 135055 250CT 1-Inch Plastic Cap Nail

• Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
• All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
• Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
• Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
• Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..

Ace Screws 3 Roofing Insulation Plates SKINNYnSTRONG - 1,000pc ,Goes with Self Tapping Fasteners into Metal and Wood Roof Decks Corrugated Roofing Commercial Insulation EPDM TPO PVC

• ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
• Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
• SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
• Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.

PORTER-CABLE 15 Degree Coil Roofing Nailer

Metal Roofing Screws 250 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head.
• Metal Screws are painted to closely match many brands of metal roofing though color may vary.
• Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).

Ace Screws 3-'' Bullseye Plate -''FLATAss-'' (1,000pc), Roofing Insulation Plates, Goes with Self Tapping Screws into Metal & Wood Decks, Corrugated Roofing, Commercial, EPDM, TPO, Silver

• The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
• Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
• Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
• Ace Plates go through continuous Quality Assurance testing by third party companys..