Top Roller Screw Actuators Reviews

JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)

  • Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
  • Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
  • Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
  • Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
  • Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check Stock

LANMU Replacement Belts Compatible with Bissell Models 2252, 2254, 22543, 2256, 2258, 2259, 2260, 2316, 2739, 1793, 1309 Powerlifter/ CleanView Swivel Rewind Pet Vacuum (2-Pack)

  • Compatibility: Designed to compatible with Bissell Powerlifter/ CleanView Swivel Rewind Pet Vacuum models 2252, 2254, 22543, 2256, 2258, 2259, 2260, 2316, 2739, 1793, 1309. Replace Part No.32074..
  • Premium Quality: Made from a durable rubber material for reliable performance. Keep your vacuum 2252 running smoothly with LANMU replacement belt..
  • Easy to Assemble: Using a Philips head screw driver remove the screws and lift off the brush plate. Remove the roller and the old belt. (Note: Unplugged before replacing the belt.) Attach the new belt to the motor pulley and the roller. With belt in place, push and slide roller into the unit, making sure that the roller are in the correct place. Reposition the brush plate and screw in the screws..
  • Long Lasting: For optimum performance, change your vacuum belt at least every 6-12 months, or 3 to 4 times per year depending upon usage..
  • Warranty: LANMU provides 1 year warranty and friendly after-sale service, makes sure the risk-free shopping for you..
Check Stock

Whitecap G-3120SSC Stainless Steel Gas Spring - 5.5\ to 7.5\

  • PREMIUM GRADE GAS SPRINGS: Made of medical grade 316L stainless steel, our extended length gas springs are built to last and are corrosion and water resistant, and can be installed and stored in any position.
  • SHOCK ABSORBANT: Protection against vibration and light side forces.
  • Minimal friction for the production of lowest extension forces and low breakaway forces.
  • ADJUSTABLE PRESSURE: Each gas spring features a valve inside the cylinder, and pressure can be adjusted by using the depressurizing screw.
  • CERAMPRO offers maximum rust and corrosion resistance of the piston rod which provides the best life cycles. (for standard gas springs) WARRANTY: One year manufacturer warranty..
  • THE BEST IN THE BUSINESS: Since 1919 and over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, dampers, and more.
Check Stock

Evinrude Diagnostic kit + EvDiag

  • Reading and resetting the fault code(s)..
  • Reading sensors and actuators in real time..
  • Tests sensors and actuators in real time..
  • Generating the graphics of engine operation..
Check Stock

AOSKY Cordless Roller Shades Blackout Blinds for Windows Room Darkening Rolled Up Shades with Spring System, UV Protection Window Shades Door Blinds for Home and Office (23" W x 72" H, Grey)

  • 【New Innovative Design】: The cordless design is safer for kids and pets. The cordless roller blinds are more convenient than corded roller blinds. Built-in the robust spring-loaded mechanism, which has passed 5,000 times usual lifting or pulling down tests for each blind, You can stop the shade wherever you want smoothly. Open the roller blind, pull it to the place.
  • Shut the roller blind, you can gently pull the buckle, and the roller blind would automatically close..
  • 【How to choose right size】：To make sure to cover the entire window, outside mount shades need to be 4 inches wider than windows wide. If your windows width is 30", order size 34" would be okay for outside....
Check Stock

DIYHD 4FT Home Office Rolling Library Ladder Hardware,Black Sliding Rail Kit for Bookshelf

  • Only hardware,not including ladder,not including floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,4FT track*1,track&wall connector*2,end cap*2.
Check Stock

DIYHD SLD-10FT Sliding Hardware Rolling Library Kit(No Ladder), 10ft, Stainless Steel

  • Ladder and Floor roller are NOT included.
  • 10FT is 2pcs 5ft track with a connector,Only top sliding hardware,not including ladder and floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,5ft track*2,joint-in track connector*1,track&wall connector*8,thick spacer*8,end cap*2.
Check Stock

DIYHD SLD-8FT Sliding Hardware Rolling Library Kit(No Ladder), 8ft, Stainless Steel

  • Only hardware,not including ladder and floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,4ft track*2,track connector*1,track&wall connector*6,thick spacer*6,end cap*2.
Check Stock

Baomain Horizontal Roller Plunger Limit Switch TZ-6102 with M20 Cable Glands Work for Heavy Duty Door Sliding Doors/Windows Pioneer,Welbon Air Curtains Maxwell with IP65 Waterproof

  • Built-in CM miniature limit switch, strong aluminum cast shell, design for water-proof and oil-proof.
  • It is the same as CM micro switch in the rated value and characteristics.
  • Various of actuators that are taken convenience for using.
  • Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut.
Check Stock

MUXSAM 10Pcs 0.24\/6mm OD Inline Skate Axle Screws Replacement, Shaft Hex Socket Screw, Inline Skate Wheel Axles Roller Blades Bearing, Wheel Axles Repair Tool (1.42\/36mm)

  • ENOUGH SCREWS: There are 10pcs female and male skating screws in a pack, suitable for inline skating wheels. Note: Both ends of the screw rod and nut must be inserted 4mm hex wrench to screw, and if only use an hex wrench, then it will turn with the However, and will not screw tightly..
  • TWO SIZE: 31mm skating screw is the perfect replacement for the front wheel. 36mm skating screw is the perfect replacement for the rear wheel and brake bolt..
  • DURABLE & STURDY: Made of high quality iron with coating on the connecting part, it is durable, sturdy and not easy to loosen. Good to improve the service life and durability of the bearing. Easy to solve the straight line roller skating damage..
  • EASY TO INSTALL: Only suitable for skating shoes required the male and female screw fittings on the wheel. You can easily fix the two ends of the shoes with the hexagonal installation tool.
  • INLINE SKATE WHEEL SCREWS: In order to outdoor skating safely, you need to replace the broken inline skate screws regularly. These inline roller skate wheel socket screws are small in size, easy and portable for you to carry and store.
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ Nylon Roller 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • The ROP Shop replacement 2" Nylon Garage Door Roller with 4" Stem & 11-Ball 6200ZZ Precision Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock