Top Rod end Spherical Plain Bearing Reviews

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • ...s built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessible maintains, and safer use..
  • Various Application: Our hydraulic top link cat cylinder is the ideal tool for various mobile equipment types in industries like wastes, recycling, constructions, transportations, agriculture, material handling, etc. It works excellently in tractors, excavators, and categories 1 and 2..
Check Stock

¾ RH XM12 4130 Chromoly Rod End Heim Joint Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Jam Nut

  • XM12 Chromoly Rod End, Heim Joint, Spherical Rod End, 3/4-16 Right Hand Male Thread, W/ Jam Nut.
  • Kit includes one rod end and one steel jam nut..
  • Chromoly 4130 Body Male Rod End With ¾-16 Right Hand Threads with a ¾ Bore.
  • Steering shaft support, 4 link suspension, 3 link suspension, Tie Rod.
Check Stock

FK Bearing FKS12 Precision Narrow Series Spherical Bearing 0.7500 x 0.044

  • 2pcs GE6C Spherical Plain Radial Bearing.
Check Stock

FK Rod Ends COM10 COM Commercial Series Spherical Bearing B Dia (Bore): .6250 D

  • 2pcs GE10C Spherical Plain Radial Bearing.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

Sealmaster CTMD 5 Rod End Bearing, Three Piece, Commercial, Self-Lubricating, Male Shank, Right Hand Thread, 5/16\-24 Shank Thread Size, 5/16\ Bore, ±7 degrees Misalignment Angle, 7/16\ Length Through Bore, 7/8\ Overall Head Width, 1.219\ Thread L...

  • Spherical rod end bearing for transferring motion between widely separated points.
  • Machined steel housing and male shank with right hand threads.
  • Delrin race and hardened, chrome-plated steel ball for resistance to galling and corrosion.
  • Maximum operating temperature of 150 degrees F (66 degrees C).
Check Stock

Allstar-ALL52132 Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit

  • Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit.
  • Mounts to steering column bracket to hold steering shaft in place.
  • Kit includes one rod end and two steel 3/4 " rh jam nuts.
Check Stock

Bailey SA Series Bearing Insert - Radial Insert Ball Bearing for High Speed Applications - Ball Bearing Steel Insert - Spherical OD Eccentric Collar - 1” ID, 2.0472” OD, Steel, 2.56 Ounces, 150854

  • SPECIFICATIONS: Our SA series radial insert ball bearings for agricultural equipment come with an eccentric shroud sleeve, have 1” inner diameter, 2.0472” outer diameter, and are made of steel. The bearing insert weighs 2.56 ounces..
  • PRECISE: The bearing bushing has an eccentric collar that allows high-speed shafts to perform eccentric functions without an eccentric axis. This eccentric bearing offers precision and efficiency in rugged agricultural applications..
  • PROTECTIVE: The eccentric locking collar in the peer bearing can handle a high degree of vibration. These collar bearings protect machinery against damage caused by vibration. These are also double sealed to reduce harm from fibers..
  • STURDY: This independent plain bearing 1 in. id is made from high-quality steel, with precision-hardened inner rings for added strength. It has a high shock absorption capacity and does not crack under pressure. Our bearing collar is made to last..
  • CONVENIENT: These sealed regreasable spherical bearings are simple to use, efficient in operation, and extremely convenient. They are useful in a number of high-speed, high-vibration applications and can be used in rugged conditions with ease..
Check Stock

KME Precision Knife Sharpener System with 4 Gold Series Diamond Hones - Base Included

  • Newest KME Kit as of June 2015 with Base Included.
  • 4 Gold Series KME 1x4 diamond hones - 140 extra-coarse, 300 coarse, 600 fine and 1500 extra fine.
  • Spherical bearing rod guide for zero angle deviation and smooth sharpening motion.
  • Continuous angle adjustment from 17 to 30 degrees - marked in 1 degree increments.
  • Very portable - stores in included hard carry case..
Check Stock