Top Rms 5 10 20 Reviews

Rockford Fosgate Punch P1000X5 5-ch Amp + P2-1X12 12' Sub + P1650 Punch Series 6.5' 2-Way car Speakers + P1650-S Component System + PLC2 Amp Remote with Sound of Tri-State Wiring Kit Bundle

  • Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant.
  • P2-1X12 ported hatchback-style enclosure with one 12" Punch P2 subwoofer 5/8" medium density fiberboard construction covered with black carpet 1-ohm total impedance power handling: 150-400 watts RMS (800 watts peak power) frequency response: 26-250 Hz sensitivity: 86 dB 19-1/8"W x 15-1/8"H x 16-5/8"D1 x 14"D2.
  • P1650 2-way 6-1/2" speakers (pair) injection-molded mineral-filled polypropylene woofer Santoprene rubber surround 3/4" treated PEI dome tweeter Vertical Attach Surround Technique (VAST) increases cone area power range: 5-55 watts RMS (110 watts peak power) frequency response: 45-20,000 Hz sensitivity: 88 dB top-mount depth: 2-5/16" grilles included.
  • P165-SI component speaker system includes two woofers, two tweeters, and two woofer grilles 6-1/2" mineral-filled polypropylene woofer Santoprene rubber surround separate 1" PEI dome tweeter integrated crossover concealed in speaker basket Vertical Attach Surround Technique (VAST) increases cone area power range: 5-60 watts RMS (120 watts peak power) frequency response: 43-20,000 Hz sensitiv....
Check Stock

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit.
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones.
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B..
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable.
Check Stock

MUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K

  • Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
  • Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock

Rockville RockMix 5 Channel Pro Mixer Bundle with Rockville ROCKSHIELD 3 Mic Isolation Shield & Rockville RCM PRO Microphone & Rockville PRO-M50 Studio Headphones & Rockville RVES05 Stand (5 Items)

  • ... with manual tuning, and auto-scan, Built in quiet cooling fan, Bright blue LED display, Perfect for karaoke, DJ, KJ, home, and commercial applications, Rugged metal housing, 110V use only, Unit weight: 17.6 lbs (8 kg), Shipping weight: 22 lbs (10 kg), Unit dimensions: 16.9 inch x 13 inch x 5.1 inch.
  • Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 % THD: 2,000 Watts Peak (1000 x 2), Peak @ 8 Ohm at 10 % THD: 1,500 Watts Peak (750 x 2), THD: less than 0.5%, Input sensitivity: 250mv/47Kohm, Frequency response: (20Hz-20KHz): ±2dB, Signal to noise ratio: ＞85db, Tone characteristic (100Hz-10KHz) ±12dB, 115V voltage power.
  • Inputs and Outputs: Front: (3) ¼” mic inputs (additional 2 mic inputs on the rear), Front: USB/SD Inputs, built-in Bluetooth, FM radio, Rear: (2) RCA Inputs, Rear: (2) MIC inputs (there are also 3 mic inputs on the front), optical input, Coaxial input, RCA Outputs (1 master line out and one mic out), Speaker outputs supports 4 speaker or 2 speaker setups (banana or bare wire).
Check Stock

Rockville Pair RKL65MBW 6.5" 700W Marine Boat Speakers W/Led+Black/White Grilles

  • Package Includes: (2) Pair RockvilIe RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles, (1) RockvilIe MS10LW 10" 2400 Watt White Marine/Boat 10" Free Air Subwoofer with LED, (1) RockvilIe DBM50 4000 Watt/980w RMS 5 Channel Marine/Boat Amplifier Amp+Mic, (1) RockvilIe RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit,(2) RockvilIe MRCA25 25 Foot Twisted Pair Marine RCA Cable , Split Pin.
  • Features of RKL65MBW: CEA Compliant Power Ratings, Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker, Total Power: 700 Watts, Beat sync LED’s flash to the rhythm of the music, You can select either red or blue color LED’s on the wire harness, No extra installation for the LED. It gets a power signal through your speaker wire, The louder the music the more intense the LED’s flash, Black and White detachable Grills, Fully Marinized Against Salt & Fresh Water Conditions.
  • Features of MS10LW: Free air subwoofer does not require any enclosure, Max Power: 2400 Watts, RMS Power: 600 Watts, Polypropylene cone with Rubber edge, 2.0" 4 Layer dual voice coil, Molded ABS plastic basket made with a special blend that is waterproof....
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • ...switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level: 200mV - 10.0V | High Input Level: N/A | Input Impedance - Low Input Level: 20KΩ | High Input Level: 20KΩ.
  • Output Stage - Output Impedance: 0.018Ω | Damping Factor ([email protected]Ω): >70 | Bandwidth (-3dB): 10Hz - 35Hz | Crossover (-12dB/Oct) | Variable High-Pass: 40Hz - 400Hz | Variable Low-Pass: 40Hz - 400Hz | Variable Sun-Sonic: N/A | Fuse Ratings: 40A | Dimensions: 9.07” L x 4.0” W x 1.46” H.
Check Stock

MUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier

  • 2-Channel Professional D-Class Power Amplifier 2x8000 Watts Peak Output.
  • Stereo Output Power: "2x8000W PEAK, 2x4000W Program, 2x2000W RMS @ 2Ω" "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @ 4Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @ 8Ω" / Bridge Output Power: "8000W PEAK, 4000W Program, 2000W RMS @ 4Ω" "4000W PEAK, 2000W Program, 1000W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protecti....
Check Stock

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

  • 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
  • Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check Stock

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

KICKER Pair 42PSC654 PSC65 6.5" 240 Watt Motorcycle/ATV/UTV/RZR Marine Speakers

  • Features: Pair Kicker 40PSC654 PSC65 6.5" 240w Motorcycle/ATV/Marine Speakers. Woofer: 6-1/2 in..
  • Power Handling Per Speaker: .120 Watts Peak .60 Watts RMS. Recommended power range: 10 - 60 watts RMS per channel. Fit Harley-Davidson and Victory motorcycles.
  • 3/4" Neo-titanium bridge-mounted Dome tweeters. Neodymium Magnet. Sensitivity: 92.5 (dB 1w/1m). Frequency Response: 40 Hz - 20 kHz. Mounting Depth: 2 in..
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock