Top Right hand Thread Reviews

R134A Self-Sealing Can Tap with Right Hand Thread, R134A Valve Tool Bottle Opener with 1/2" Female R-H Thread and 1/4’’ SAE Male Connector, Fits for R134A Automotive Air Conditioning Charging

  • 【COMPATIBILITY】 -- This R134A self-sealing dispensing valve bottle opener fits for a self sealing 1/2" right hand thread for use with most R134A self-sealing/reusable designed cans. Please note there are two kinds for self-sealing can taps, R134A and R1234YF can tap, R134A self-sealing can tap with right hand threaded, but R1234YF self-sealing can tap with left hand threaded. Please check your can before purchase..
  • 【THREAD 】 -- R134A valve can tap connecting thread 1/4’’ SAE Male, interface thread 1/2’’ right hand female thread..
  • 【EASY INSTALLATION】 -- Aupoko R134A self-sealing valve can tap is designed with safety check valve, and easy to open R134a self-sealing can with valve to turn off to reserve for future use..
  • 【PREMIUM QUALITY】 -- The R134A self sealing can adapter is made of aluminum alloy with heavy-duty construction, with gasket protected to prevent leaks for durable use..
  • 【1 YEAR WARRANTY】 -- Order R134A self sealing can tap from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check Stock

Dbl End Thd Stud, 5/16-18x5 OAL, PK2

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Overall Length: 80mm Workable Length: 53mm Thread Length (B): 27mm.
  • Thread Length (A): 27mm Thread Length Type: Equal Country of Origin (subject to change): United States.
Check Stock

Thread Forming Tap Bttm 1/4-20 Uncoated

  • Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
  • Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock

.750' 3/4” rod end heim joint kit left and right hand thread

  • Includes 1-right hand thread 1-Left hand thread Heim set. Spacers Jam nuts and tube adapters included..
  • Misalignment spacers fit 5/8" standard bolts (Grade 8 or better recommended).
  • Use these for low-load applications. Steering shafts, light-duty track bars or suspension ends..
Check Stock

Made in Canada Indie & Alternative

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

The Hillman Group 2775 3/8 x 2-3/4-Inch Automotive Stud, 4-Pack

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Overall Length: 65mm Workable Length: 45mm Thread Length (B): 20mm.
  • Thread Length (A): 20mm Thread Length Type: Equal Country of Origin (subject to change): United States.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

Threaded Rod, Carbon Steel, 1/2-20x1 ft

  • Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
  • Country of Origin (subject to change): United States.
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Weld Stud 1/4-20 x 0.960 in PK100

  • Price For: Each Meets/Exceeds: - Finish: Plain Thread Direction: Right Hand Material: Steel Item: Weld Stud Type: Bottom Projection Thread Size: 1/4-20 Thread Type: UNC Thread Length: 0.960" Length under Head: 1" Head Dia.: 0.563" Head Height: 0.078" Projection Width: 0.100" Projection Height: 0.040" Spade Length: - Spade Width: -.
  • Spade Height: - Country of Origin (subject to change): United States.
Check Stock

Weld Stud, 1/4-20 x 1.210 in, PK100

  • Price For: Each Meets/Exceeds: - Finish: Plain Thread Direction: Right Hand Material: Steel Item: Weld Stud Type: Bottom Projection Thread Size: 1/4-20 Thread Type: UNC Thread Length: 1.210" Length under Head: 1-1/4" Head Dia.: 0.563" Head Height: 0.078" Projection Width: 0.100" Projection Height: 0.040" Spade Length: - Spade Width: -.
  • Spade Height: - Country of Origin (subject to change): United States.
Check Stock

Northwestern Tools Inc SUS-70 Steel Equal-Thread Length Setup Stud 1/4-20 Thd., 3 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Inch Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: 5/16"-18 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Thread Size: 5/16"-18 Overall Length: 5" Thread Length (A): 1-3/4" Thread Length (B): 1/2".
  • Thread Length Type: Unequal Workable Length: 3-1/4" Country of Origin (subject to change): United States.
Check Stock

Te-Co, 60303, Dbl THD Stud, M8x1.25x80mm OAL, PK2

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Overall Length: 110mm Workable Length: 79mm Thread Length (B): 31mm.
  • Thread Length (A): 31mm Thread Length Type: Equal Country of Origin (subject to change): United States.
Check Stock