Top Rf Signal Strength Analyzer Reviews

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..

Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
The higher radio frequency signal range or power is, the higher output voltage will be.
output voltage is proportional to logarithm of input signal range.
Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.

Check Stock

Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1

003cp003e◙【003cb003eBuilt-in 2-in-1 Calibration Signal Generator003c/b003e】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.003c/p003e.
003cp003e◙【003cb003e Frequency Range003c/b003e】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.003c/p003e.
003cp003e◙【003cb003ePC Control003c/b003e】This spectrum analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.003c/p003e.
003cp003e◙【003cb003ePortable Spectrum Analyzer & ESD Protection Function003c/b003e】The latest version 3.1, new ESD protection function, insta....

Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

...g extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
-20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability..

Check Stock

EMF Meter,Advanced GQ EMF-390 Multi-Field Electromagnetic Radiation 3-in-1 EMF ELF RF meter, 5G Cell Tower Smart meter Wifi Signal Detector RF up to 10GHz with Data Logger and 2.5Ghz Spectrum Analyzer

Multiple high sensitivity sensors installed for detecting Power line, Smart meter, Cell phone, Microwave etc..
Identify/recognize the common possible sources, such as Power line, Cell Tower, Microwave, Static etc..
Safety suggestion lets you understand current situation instantly..
Detects 5G network signal and RF up to 10Ghz.
Built-in RF Spectrum analyzer and GQ RF Browser for real time RF monitoring..

Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

The product is designed by using AD8317 chip, and is used for RF signal power detection..
Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
It can also be used as part of automatic gain control and automatic level control..

Check Stock

YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms

AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF signal power detection.
-55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF signal, so that the RF signal is converted to DC voltage output.
APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring.
Power monitoring in a radio line transmitter.
RSSI measurements in base stations, WLAN, WiMAX, and radar.
55dB---The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB.
WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency signal detection, signal power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control.

Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

[Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
[Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
[Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
[Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
[Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..

Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

...g extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability. [Note]: This item uses 110V AC power only. It can not be used for 220V setup..

Check Stock

Satlink WS6966 Satellite Finder Meter MPEG4 DVB-S2 Meter Satlink WS-6966 HD Satellite Finder

WS-6966 Support formal international standard video and audio encoding.
Satlink WS-6966 Satellite Finder Meter has 4.3 Inch High Definition TFT LCD Screen.
Support DISEQC 1.0,1.1,1.2 and 22khz Tone.
Software upgrade via USB port. Easy to carry..
Measurement Type: signal strength,quality, BER, S/N,PWR, MER.
Sound and Light Alarm for Locking Signal.

Check Stock

Kupa MANIPro Passport ROSE CONTROL BOX ONLY CB-PASSPORT-ROSE

Anti-Spy Device: This bug detector can find eavesdropping devices, pinhole cameras, mini hidden camera and GPS locators, which can protect your....
RF Signal Detector: It can detect radio waves, 2G, 3G, 4G mobile signals, SIM card bug and radio frequencies from 1MHz to 6.5GHz. Any eavesdropping....
Easy to Find out: There are 5-level sensitivity to expand the detection range. And the signal indicator will shows the strength of the signal source.....
Detect both Wireless or Wireless Eavesdropping Devices: The 2 modes: RF mode (for WiFi and radio wave devices).
Portable Detector: Size: 1.6cm*13cm, weight: 30g. This lightweight detector is convenient to use at various places, such as hotel, conference room,....

Check Stock

RCA CRF907A RF Modulator - Quantity 1

RCA RF Modulator - Convert VGA 、AV video & audio signal to coax RF TV signal , helping combine your PC ( computer / laptop ) DVD , VCR VHS or Game Console etc. to your home theater to share the MPEG4 movies downloaded from the internet，hook up your DVD / VCR etc. VGA video devices or VHS / Game Console RCA audio & video devices with a RF splitter or large screen TVs that come with coax analog signal directly to demonstrate the multimedia documents or dispaly tv videos..
VGA RF Adapter - Ultra long distance signal transmission can be carried out by the included F type male to PAL male coaxial cable to achieve sharing multimedia documents , movies , videos or tv programs on multiple tv screens in diffrent rooms or farther away from the VGA / RCA source, just like working on your pc in your own room while playing entertainment videos to parents or children in another room, which is very conducive to protecting personal privacy and enjoying independent space..
AV & VGA to Coaxial RF Converter for TV - VGA (video signal only , not come with audio ) in + AV composite audio / video in ( An additional 3.5mm audio cable is required, which can be 3.5mm to 3.5mm, 2rca to 3.5mm or 3rca to 3.5mm )， then RF coaxial out and output only analog signals, the image....

Check Stock

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1

✅【2023 Upgraded TinySA Ultra】:This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage..
✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..

Check Stock