Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE
- Works with all of Adafruit's three basic 315MHz RF receiver modules.
- Only a transmitter, no receiver module included.
Top Rf Receiver Module Reviews
RF Coax to HDMI DVI Demodulator Analog UHF VHF CATV Tuner for NTSC System
- Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs. Supports all coax signals coming from cable....
- Professional grade agile RF coax demodulator for converting the RF coax cable TV. External add-on TV tuner module for LCD TV, HD monitor/projector....
- Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details. [Note]: This is an analog TV tuner so....
- Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
- Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance. Supports last channel....
Drone Racing League: 2017 eSports Tryouts
- ...ke other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
- 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
- Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch
- Save yourself the inconvenience of walking over to turn on your dust Collector while you're in the middle of a critical project.
- Includes: receiver, hand control, 9V battery.
- RF signal goes through walls with no outside interference: Unlimited programmable frequencies.
Durablow TR2003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat (Input 100-240VAC)
- ★★ ATTENTION: This device is NOT a power supply unit. It is a switch designed for connecting to Millivolt valve, or to electric spark ignition module, or can replace wall switch..
- ▼ All battery powered R.F. 2-button transmitter and receiver box kit gives wireless remote control to a gas heating appliance, such as gas fireplace, fire pit, stove. ▼ This is a simple On/Off remote control, gives an instant & manual control of the flame and heat..
- ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to connect MILLIVOLT valve, or electric spark ignition module, or to replace wall switch. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
- ▼ Replaces Cross Reference Model #: SKY, 1001, 1001-A, 1001TH, 1001T, 1001D 1410, 1410T, 1410-A, 1410TH, RG04-1M, UN3. ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners..
- ▼ Includes: Remote transmitter, receiver box, wall mount cover plate, screws, slide switch, wires with connectors, manuals / instructions. ▼ FCC approved. Operates at a range of 20-foot & non-directional RF signal. ▼ Transmitter operates (2) 1.5V AAA bat....
FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM
- Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver.This insanely tiny 2.4GHz diversity....
- XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time.
- Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E....
- weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW,....
- FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone....
BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle
- ...ke other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
- 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
- Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Rage RC A1305 Curtiss P-40 Warhawk Micro Rtf Airplane W/Pass
- 1) Bring the transmitter and the receiver close to each Other, within 20 inches (half meter)..
- 2) Integrated stabilizing circuit, operating voltage up to 1-2S Lipo, it won’t be out of control for sudden low voltage.
- 3) Light weight, micro size, full 4CH output, especially for Mini-Z or mini aircraft..
- 4) Operating Voltage: 3.3V～8.4V Weight: 3.5g ,Channels: 4CH, Built-in Antenna.
- 5) Compatible: Futaba S_FHSS/ TM-FH RF Module control system.
Kenwood KFC-1673MRWL 6-1/2\ 2-Way Marine Speakers with Grilles (Pair) | Built-in LED Lights (White)
- The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone..
- There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes..
- Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer..
- A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's..
- Water-resistant PP Cone (IPX5) , UV resistant woofer grille and cone.
FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone
- Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight.
- Supports redundancy function Support telemetry and Smart Port enabled.
- US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail....
Durablow TR1003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat
- ★★ ATTENTION: This device is NOT a power supply/Ignitor unit. (No voltage output itself, but passing voltage from your fireplace thermopile for safety reason). Please connect it with power source or circuit in series if using it as a switch. ▼ Durablow battery powered R.F. + LCD screen transmitter and receiver kits give wireless remote control to a gas heating appliance, such as gas fireplace. ▼ Childproof safety lock available. ▼ The temperature range is from 45℉ (7℃) to 99℉ (37℃) ..
- ▼ Thermostat feature in transmitter turns ON/OFF when room temperature changes. It also operates the fireplace with the room temperature swings 1 °F, 2 °F, or 3 °F. ▼ Timer feature operates at options of 15 minutes Min. to 9 hours Max...
- ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to gas MILLIVOLT valve or electric spark ignition module. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
- ▼ Replaces Cross Reference Model #: SKY, 9800322, 9800323, 9800324, 9800326, 9800328, 9800329, 9800550, 9800580, 1001-A, 1001, 1001TH, 1001T, 1410T, 1410-A, 1410TH, 3002, 3301, CON, RCK-K, RCK-KS, 5001, 5010, 5301, 5310, 55644, HRC200 ▼ LEGAL DISCLAIMER: The Brand name & Model # (i....
HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm
- Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without....
- Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
- They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other.
- Compatible with SparkFun’s 434MHz RF transmitter and RF receiver.
- This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!.
SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi
- The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
- Easy to use, with pin header. The module can be directly loaded into the various reader molds..
- Applicable for the user who need to design or manufacture the RF card terminal..
- Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
- Power Voltage : 3.3V,Operating frequency: 13.56MHz..