Top Rf Module Control Reviews

Analog CATV Tuner with RCA A/V Output for Cable TV Satellite Receiver

  • Professional RF coax to RCA video demodulator for NSTC CATV and aerial UHF/VHF system. Digital LED screen for TV channel display on the front panel of the module to show users the TV channel selected..
  • Users have the option to remove the unwanted TV channels from the reception for parental control or other purposes. The deleted channel can be skipped when flipping channel up/down button and can always be added back if needed. Supports last channel memory after power-off or power outage. This coax video demodulator will stay tuned to the last TV channel after being powered off manually or power outage event..
  • Automatic video/audio gain control for compensating the input signal level variation for optimal performance. Multiple units can be daisy chained together on 1U, 2U or 3U rack using the optional rack mounting kit. Rack-mount kits are sold separately..
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

RF Coax to HDMI DVI Demodulator Analog UHF VHF CATV Tuner for NTSC System

  • Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs. Supports all coax signals coming from cable....
  • Professional grade agile RF coax demodulator for converting the RF coax cable TV. External add-on TV tuner module for LCD TV, HD monitor/projector....
  • Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details. [Note]: This is an analog TV tuner so....
  • Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
  • Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance. Supports last channel....
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
  • -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat d....
Check Stock

1pc PE4302 Numerical Control Attenuator Parallel Immediate Mode 1MHz~4GHz, Program Control Gain Attenuation Range is from 0 to 31.5DB

  • This is a PE4302 numerical control RF attenuator module.
  • The parallel immediate mode is simple and easy to use.
  • Bandwidth is wide and can be 1MHz to 4GHz.
  • Program control gain attenuation range is from 0 to 31.5DB.
  • The module supports parallel port and serial port mode as well as power on state selection function.
Check Stock

QIACHIP DC 12V 1CH 433Mhz RF Wireless Relay Remote Control Light Momentary Switch Transmitter with Receiver (1 Relay)

  • The volume is small and the performance is stable and reliable, high receive sensitivity, Signal can pass through walls, floors and doors. Max range is up to 164ft/50m with no obstacle..
  • DC 12V 1-Channel Wireless Remote Control Relay Switch .The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability..
  • The rf relay adopts non-directional wireless encoding technology, allowing independent control without mutual interference..
  • The programmable rf transmitter and receivers can be flexibly configured in quantity and in operating modes..
  • It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
Check Stock

Handicap Wireless Push Switch with 2pcs Square 4.5'' Push Panels and 1pcs 2.4G Frequency High Stability Receiver

  • The volume is small and the performance is stable and reliable, high receive sensitivity, Signal can pass through walls, floors and doors. Max range is up to 164ft/50m with no obstacle..
  • DC 12V 1-Channel Wireless Remote Control Relay Switch .The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability..
  • The rf relay adopts non-directional wireless encoding technology, allowing independent control without mutual interference..
  • The programmable rf transmitter and receivers can be flexibly configured in quantity and in operating modes..
  • It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
Check Stock

X-10 Transceiver Module - Model RR501

  • Increased sensitivity compared to the TM751 transceiver.
  • Built-in 2-pin polarized appliance module responds to unit code 1 or 9.
  • Use this as the heart of any X10 wireless remote control system or to add an additional housecode to an existing system.
  • Receives RF signals from an X10 remote via the antenna and retransmits them thru your house wiring to control X10 modules.
Check Stock

ALMOCN 4 Set 433MHz RF Wireless Transmitter and Receiver Kit High Frequency Super Regenerative Transceiver Module for Arduino Raspberry pi

  • Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high....
  • Frequency used to receive, decode and oscillation resistor should match with the transmitter..
  • Application:Usually used for remote control systems, such as Remote control rolling gates, smart car, smart home, etc..
Check Stock

Happymodel ELRS 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver EP1 RX

  • The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released..
  • On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and....
  • Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop....
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPIļ¼Œ Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

Kenwood KFC-1673MRWL 6-1/2\ 2-Way Marine Speakers with Grilles (Pair) | Built-in LED Lights (White)

  • The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone..
  • There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes..
  • Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer..
  • A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's..
  • Water-resistant PP Cone (IPX5) , UV resistant woofer grille and cone.
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat d....
Check Stock