Top Rf Id Card Lock Reviews

1 Pack Heavy Duty Hard Plastic Locking Id Badge Holder Horizontal and Vertical Dual-Use Hold 3 Card by Fallen One

  • Detachable Id Badge Holder: The end piece snap into Card Holder lock cards inside never falling out, and can unlock remove cards out with matching key ( Include ).
  • Horizontal and Vertical Dual-Use: Work in both ways,two slot holes allow for ways connection to your lanyard,retractable badge reel.
  • Hold 3 Id badges: Each Name Card Protector can hold 3 Cards,ideal for office key cards, smart PIV, CAC, and all ISO laminated card (drivers license/ credit card size) ,(L x W) 3.370"x 2.125" (85.6mmx53.98mm).
  • Sturdy and Durable : The Identification Badge Holder material is Hard Plastic avoid from broken to prevent glare off of your photo ID badge and from scratches.
  • RFID : Cards in the Id Card Holder can be scanned by RFID and Prox Card scanners, but if inside multi-cards,the middle cards may can't be scanned..
Check Stock

Gialer 50 Pack MIFARE 1 Classic 1K RFID Smart Intelligent Card ISO 14443A 13.56MHZ Blank Smart IC Card Contactless Hotel Key Cards Access Control Card Sublimation Printable

  • [Chip] - FUDAN FM11RF08 compatible MIFARE Classic 1K 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,MIFARE and MIFARE Classic are trademarks of NXP B.V..
  • [Printable and Compatible] - Printable on all ISO Standard Desktop Photo ID Card Printers(NOT Use for INKJET Printers): Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. Can NOT work with HID,Salto and Assa Abloy Locks systems.
  • [Programmable] - All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF..
  • [Reading Distance] - There is Mifare Class Chip inside of card via lamination.it's contactless with 1-10 cm reading distance(based on the reader)..
  • [Standard Credit Card Size]- 3 3/8" x 2 1/8" (85mm*54mm) Standard Credit Card Size (CR80 30 Mil),each card individually OPP bag packed. Blank white both sides(no printed numbers, no magnetic strips and no slots or holes).-.
Check Stock

Samsung RFID Sticky Key for Samsung Door Locks Quantity 4 + 1 RFID Card

  • Bundle for 4 RFID sticky keys and 1 RFID card.
  • Works with ALL Samsung digital door locks..
  • The RFID sticky keys, tags, or cards can be programmed to open multiple door locks. One key to rule them all (your Samsung door locks that is)..
  • The sticky key is super thin and has a pretty strong adhesive. The most common place to use a sticky key is on the back of a phone. RFID card is exact....
  • [ RF ID ] 13.56MHz ISO14443 A Type Mifare.
Check Stock

Cartoon Dog Character Real Charming Retractable Metal Carabiner ID Badge Holder Badge Reel (Snoop Wood MC)

  • 【Advantages】- Front ID Window with Clear Cover features visibility ,Card holder with lanyard,Comfortable to wear, stylish design, good texture, easy to carry, light-weight. Suitable for personal use and corporate office supplies procurement..
  • 【Top material】- The id holder with lanyard is made by PU leather, compared to the plastic material, PU leather is much more durable and last longer. Reliable stainless steel lock catch can make sure the holder will not drop down..
  • 【Product features】- This badge holder with lanyard has 1 Clear ID Window in the Front Side,1 Card slot in the Back Side,A work card and 1 piece detachable Lanyard. simple& beautiful& useful& reliable..
  • 【Applicable scenes】- This id holder can be perfectly used for businessman, staffs, students, teachers, doctors, couriers, waiters, etc. wherever needs a high-quality badge holder, this id card holder will definitely be your best choice..
  • 【100% Satisfaction 】- Your experience and satisfaction with our product is our goal. If you have any issues, please reach out to us so we can solve for you immediately..
Check Stock

Baofeng UV-5R Dual Band Two Way Radio with 3800mAh Li-ion Battery, Walkie Talkie,Upgrade Version(144-148/420-450Mhz)

  • PLEASE PAY ATTENTION to that the item is the latest version of the UV-5R radio, whose frequency is 144-148/420-450Mhz. You have to set the frequency among 144-148Mhz/420-450Mhz,or the radio will not transmit.
  • 128 Channels 50 ctcss and 104 CDCSS dual-band display, Dual Freq. Display, dual-standby, a/B band independent operation | High/low TX power selectable: busy Channel lock-out(bclo)..
  • 【FCC Certificate】UV-5R As a Amateur Radios(Equipment Class: Scanning Receiver), has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. FFC ID: 2AJGM-UV5R..
  • Tri-color background light selectable. The FCC ID of UV-5R is 2AJGM-UV5R.
  • LED flashlight: hight/low RF power switchable.Keypad Lock: channel step: 2.5/5/6.25/10/12.5Khz | voice Companding: 50 ctcss/ 104DCS coder & tone searching..
Check Stock

Speck Products Universal Phone Case LootLock Stick-on Wallet Eclipse Blue

  • Loot Lock's no-stretch casing was built for security. Easily lock 1-3 cards or cash in place with a universal design that will work with most cases....
  • For total security, flip Loot Lock's storage casing over And snap into place to completely conceal your cards, cash, or ID..
  • When you need to charge your mobile device, simply remove Loot Lock's casing and snap back into place when you’re charged..
  • Loot Lock's smooth, card removal technology allows you to easily grab the card you need at any time, not all three..
  • Loot Lock is about the size of a credit card and as thick as three credit cards. It slides smoothly in and out of pockets and other small spaces..
Check Stock

Door Access Control Keypad, 125KHz Proximity ID Card Access Control System, Support 1000 Users Door Access Control, Stand-Alone Keypad + 5PCS Keychains for Entry Access Controller Gate Opener

  • 3 Access Ways --- The access control keypad integrated machine support swipe card or password or password + swipe card to open the door. Support store 1000 users capacity. Can add users and delete users as your requirement..
  • Simple and Practical --- Shell is made of ABS fire retardant, panel hard shell rubber film, which has good fire retardant effect, Full programming from the keypad, don't need to connect to computer. Support add/delete cards, set password, etc..
  • Safe and Flexibility --- Support electric lock,NC lock, door bell, exit button, power supply control. Wiegand 26 input and output, 0-99s adjustable door open time. Door bell button support external doorbell..
  • 125Hz ID Keyfobs --- Including 5PCS ID Keychains, pre-programmed with a unique ID number. Compatible EM standard card, Only the ID keyfob authorized by the access control system then can be open the door..
  • Widely Used --- Access control system able to deterring unauthorized personnel, Suitable for apartment, office, access control, off-limit area, hotel locks, school campus access, identification, parking lot entry, etc..
Check Stock

2 Pieces Car Key Cases Car Key Fob Vehicle Smart Keychain Case Holder Black

  • 5-Button replacement transmitter remote (Replacement for XT-11, XT-12, XT-21, XT-24, XT-57, XT-59, XT-60, XT-61, XT-62, XT-63, XT-65S, XT-72S).
  • FCC ID: H50T21 H5OT21 (Replacement for B23AT67, H50T20 H5OT20, H50T31 H5OT31, H50T33 H5OT33, H50T52 H5OT52).
  • AM, superheterodyne (SAW), 433.92MHz, clear LED lens (Blue, green, or red when LED on).
  • Works for CPX-RS1, CPX-RS2, DS-434, KE-120, RF-105KE, RF-1050KE, RF-1055KE, RF-215, RF-220, RF-225, RF-305, RF-310, RF-315, RF-350, RF-355, RF-405,....
  • NOTE: Button configurations may vary on remotes with different button layout than this remote.
Check Stock

Generic Horizontal Name Tag Badge ID Card Holder Heavy Duty Clear Plastic Cover Sleeve Pouch with Waterproof Type Resealable Zip DualUse Hanging Holes Name Badge Inserts 10 Piece Pack, 10x8cm

  • DURABLE PLASTIC MATERIAL - This ID card holder is wear-resistant and corrosion-resistant properties. High transparency. Even if multiple badge holders overlapping, read effortlessly. High quality, transparent, plastic id badge cardholder..
  • DUAL-USE HANGING HOLES - The middle slot of these plastic id sleeve is for lanyard, keychain, or retractable carabiner reel clip, both side holes for the cord/strap/string/thread. The hanging slot/holes for this card holders will not break, distorted much time..
  • WATERPROOF, DUSTPROOF & RESEALABLE - Easily open and close these badge holders with the excellent resealable zip-lock closure. This waterproof and dustproof id card holder is great to keep your important paper badges or cards dry, clean, and secure..
  • GREAT VALUE PACK - On purchase, you will receive 10 individual plastic ID badge holders. These horizontal plastic ID name card holders measuring 10x8cm, capable of housing ID cards up to 9.5x5.5cm will generously fit all your cards.
  • MULTIPLE USES - Perfect quantity for company, lanyard badges, staff, and student IDs, and a multitude of additional uses. Make an impression at your next company gathering or social event. A versatile nametag holder fits a variety of cards and IDs..
Check Stock

YONGNUO YN560-TX PRO C Flash Transmitter Control Trigger 1/8000s HSS TTL for YN862C YN968C YN200 YN685C YN622CII for Canon

  • YN560-TX PRO can control, trigger YN200/YN862 series and the models which have been upgraded to the latest firmware such as YN622C(N) II/YN685/YN968C/YN968N(II) (in 560RX mode) to realize ETTL/M/Multi flash, high speed sync, focal length control functions..
  • Compatible with radio flash and flash trigger models such as YONGNUO YN560III/IV/YN660/YN720/YN860Li/RF603 series /RF605 series directly, realize M/Multi flash functions..
  • 16 channels, up to 10,000 customizable photographer ID, A/B/C/D/E 5 flash groups.
  • Fully supports ETTL/M/Multi/GR flash mode. Supports front-curtain sync, second curtain sync(M mode),high speed sync.
  • Supports ETTL ratio, flash exposure compensation, flash exposure Lock, flash exposure bracketing, modeling flash functions. 2.4G radio Maximum communication distance is over 100m..
  • Supports remote control focal settings of slave unit flash (only for YONGNUO compatible flashes).
  • Firmware can be upgraded via USB(Micro-USB).
  • High resolution dot-matrix LCD, backlight for keys.
Check Stock

ETEKJOY 100 PCS 125KHz RFID Proximity ID Cards Token Tag Key Card for Entry Access Control System for Electronic Door Cabinet Lock Read Only

  • Note: These are 125kHz RFID Cards (tags). If you want to add them to your lock system, please ensure that your system uses the same frequency of unencrypted 125kHz. Incompatible with other frequencies like 13.56MHz. Incompatible with encrypted tags like HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, Kaba, Isonas, etc..
  • Read only. Not re-writable. You canNOT re-program them. Each card is pre-programmed with a unique ID number. The 10-digit number is printed on the card..
  • Compatible with other universal 125kHz cards/tags like EM4100/4102..
  • Suitable for 125kHz RFID proximity access control system and ID management system. For example, add them to your RFID door lock as new key cards if applicable..
  • Card Size: 3.38” x 2.18”(same size as a credit card). Casing Material: PVC Plastic. Package includes 100 PCS..
Check Stock

Bright Neon Hot Pink Lanyard with Anti-Lost ID Holders Cruise Fluorescent Lanyard for Waterproof ID Badges Holder(Neon Hot Pink,12Pack)

  • You will get 12 Neon Hot Pink Super Bright Lanyards with 12 Anti-lost ID Holders,.
  • Super Bright Lanyards suitable for many occasions, such as daily holding masks, work cards, membership cards, credit cards, etc, It also can be used for carnivals, schools, offices, parties, weekend parties, park days, family days, etc..
  • The ID Card Holder is made of safe and transparent PVC material with exquisite details: the ID holder has anti loss function, after locking the lock, it can avoid loss. and the ID card, credit card and entrance guard card could be stored. Waterproof and transparent visual..
  • Super Bright Lanyard material: made of 100% polyester, safe and accessible to skin, durable webbing and firm sewing. Zinc alloy hardware clip is exquisite in workmanship, pays attention to details, has no rough edges and does not scratch hands. The switch is easy to open and can be gently buckled by fingers. The tail buckle is very flexible and can rotate 360 degrees infinitely. There is a reinforcing ring at the bottom of the tail buckle, which is beautiful and firm..
  • Super Bright Lanyard size: T0.7mm x W0.7in x L35.5in, ID Card Holder size:W2.75 x L4.75in x T0.4mm, We promise "100% satisfaction" and "30 days no reason to return and exchange" services. Please enjoy you....
Check Stock

Emf Protection&Shielding Faraday Fabric 44in W x 18ft L! EMI, RF&RFID Shielding Fabric, Military Grade Certified Material Blocks Signals (WiFi, Cell, EMF Radiation)

  • ... SIGNAL MORE EFFECTIVELY】The conductive copper fabric is a powerful conducting material that can be used for shielding against EMI and RF signals. Its composition effectively blocks Wi-Fi, Bluetooth, cell signals, GPS, NFC and RFID, protects your privacy.Besides, the faraday fabric also can be used for storing ID card, bank cards, credit card to prevent being stolen by others..
  • ✔【EASY CUTTUBFAND SEWING】The Faraday Fabric is 44in W x 18ft L. Just like standard fabric, this wrinkle-free material is easy to cut and sew to create custom coverings or mesh barriers according to your shielding requirements..
  • ✔【BRAND QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. Satisfaction Guarantee for risk-free shopping!.
Check Stock