Top Rf Frequency Analyzer Reviews

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check Stock

Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1

  • 003cp003e◙【003cb003eBuilt-in 2-in-1 Calibration Signal Generator003c/b003e】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.003c/p003e.
  • 003cp003e◙【003cb003e Frequency Range003c/b003e】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.003c/p003e.
  • 003cp003e◙【003cb003ePC Control003c/b003e】This spectrum analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.003c/p003e.
  • 003cp003e◙【003cb003ePortable Spectrum Analyzer & ESD Protection Function003c/b003e】The latest version 3.1, new ESD protection function, insta....
Check Stock

RF Explorer 6G Combo with AluminiumCarrying Case RF Explorer Pro Software for RF and Wi-Fi Analyzing on Windows and Mac

  • Frequency band: 15MHz-2.7GHz and 4.85GHz-6.1GHz.
  • Newest Firmware upgrade includes Wifi Analyzer.
  • Free Mac and Windows software for analysing RF and WiFi networks using Waterfall 3D and 2D.
  • Aluminium carrying case allows to to protect your RF Explorer device and keep all the parts and components organized.
Check Stock

[2022 Upgraded] AURSINC NanoVNA-H4 V4.3 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF 4'' Portable Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

  • ...a storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered.
  • ✔️[Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • The metal shield is designed to reduce the external interference and improve the measurement accuracy.
  • ✔️[Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
  • ✔️[PC Control] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a compute....
Check Stock

NanoVNA V2 3G Vector Network Analyzer Metal Shell Touch Screen 2.8 Inch Antenna Analyzer 50KHz~3GHz Shortwave HF VHF UHF Standing Wave Spectrum Analyzer

  • 3G upgrade version: NanoVNA V2 vector network analyzer measuring frequency range is 50KHz~3GHz. The network analyzer is based on the design of OwOComm, adopts a 2.8-inch TFT LCD touch screen display, optimizes the appearance design, battery capacity and internal configuration, and is equipped with high-performance calibration kits and packaging accessories, so as to develop and produce an easier vector network analyzer to carry and use..
  • Large-capacity battery and stylus: The antenna analyzer's 1950mAh large-capacity battery has longer standby time and durability compared to the previous model. Equipped with a resistive screen stylus, which greatly improves the situation of poor touch and inaccurate click on the screen..
  • Metal shell: NanoVNA V2 3GHz is made of high-quality metal materials, which can fully protect the internal precision circuits, practical, easy to operate, and long service life..
  • Easy to carry: Vector network analyzer is equipped with EVA outer packaging, which is easy to carry and store, practical, and has a long service life. If you have any questions, please contact us in time, we are willing to help you solve the problem..
  • Good amplitude and phase stability: 2 customized high-performance SMA RF cables provide good amplitude and phase....
Check Stock

MFJ-259D MFJ259D Original MFJ Enterprises Antenna Analyzer VHF/220 MHz 100-160 KHz 280-520 KHz .53-230 MHz - Replaces MFJ-259C

  • ame great performance as the popular MFJ-259C, but with two additional frequency ranges (100-160KHz and 280-520KHz).
  • Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information. Super easy to use! Just set the bandswitch and....
  • Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D (not included).
  • Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll....
  • Complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and....
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen

  • ...protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
  • [Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectrum analyzer contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full lo....
Check Stock

New ANTMINER KA3 166Th/s Kadena Mining Machine, KDA 3154W Asic Coin Miner with Power Supply

  • Multiple high sensitivity sensors installed for detecting Power line, Smart meter, Cell phone, Microwave etc..
  • Identify/recognize the common possible sources, such as Power line, Cell Tower, Microwave, Static etc..
  • Safety suggestion lets you understand current situation instantly..
  • Detects 5G network signal and RF up to 10Ghz.
  • Built-in RF Spectrum analyzer and GQ RF Browser for real time RF monitoring..
Check Stock

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1

  • ... 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage..
  • ✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
  • ✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • ✅【PC Control】:Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP ....
Check Stock

SPA-6G Spectrum Analyzer and RF Explorer 6G Combo Bands Handheld Frequency Analyzing for Ham Radio Wireless Devices WiFi Networks Audio Engineers

  • IMPRESSIVE WIDE FREQUENCY BAND from 15MHz-2.7GHz and 4.85GHz-6.1GHz..
  • WIFI ANALYZER MODE Allow you to identify Wifi issues and find the optimized channel or the best place for your routers or access-points to be places..
  • MORE ADVANCED FUNCTIONALITY AVAILABLE for the SPA-6G RF explorer by connecting to a Windows or MAC PC using the free downloadable professional....
  • BONUS DELUXE CARRY CASE included in this value SPA-6G combo kit. This Aluminum hard carrying case provide you with an easy and convenient way to....
  • 100% MONEY BACK GUARANTEE ensures this will quickly become your favorite no-risk purchase..
Check Stock

Signal Generator, Multi-Function LHT00SU1 Oscilloscope 2 Channel Input Virtual Oscilloscope Logic Analyzer USB Logic Analyzer

  • 【Supported Protocols】Serial Peripheral Interface, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2.
  • 【Multi Purpose】8-channel logic analyzer, Data Logger. PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【Dual Channel】Dual channel voltmeter, Mixed signal oscilloscopes and logic analyzer, Dual input oscilloscope (single, 16Msps, 3MHz bandwidth).
  • 【Frequency Meter】PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【100% Guarantee】High quality product, we promise to do everything possible to satisfy all customers. However, if you are not 100% satisfied with our service or our products, simply contact us. We are always at the side of our customers to support and continuously seek new ways to improve.
Check Stock

35?4400MHz Portable Spectrum Analyzer,3.5 ”TFT Handheld Frequency Analyzer Amplitude Bandwidth Frequency Signal Generator,Tracking Generator Steps Sweep Signal Generator (PLZ-SA354400A 3.5inch LCD)

  • [ Accurately Track ] This portable spectrum analyzer 35‑4400MHz Equipped with a tracking source TG, the frequency of the signal output by the tracking source can accurately track the tuning frequency of the spectrum analyzer..
  • [Output Range]35MHz‑4.4GHz signal source output range, can display and analyze a simple spectrum.The input dBm scope is -80dBm~0dBm, output dBm is 0dBm..
  • [4 Major Modes ]Four major modes: Network mode, Spectrum mode, Point frequency mode, Sweep mode. After power on, the default mode is Network mode..
  • [3.5 Inch Touch Display ] Touch function, without button operation, you can directly click on the touch screen to operate..
  • [Portable ] Handheld spectrum analyzer Easy to carry and tiny , powered by USB-C cable,it can be easily hand‑held for measurement or carried to various places.Made of aluminum alloy material, wear resistance and can provide long service time..
Check Stock

NanoVNA-F V2 Antenna Analyzer,4.3 inch NanoVNA V2 3Ghz Vector Netwerk Analyzer Upgraded Version NanoVNA with 5000mAh Measuring S-Parameter Voltage SWR Phase Delay Smith Chart

  • 【4.3inch Large Screen】Our NanoVNA-F V2 with 4.3-inch IPS TFT LCD screen with 800 * 480 resolution, can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. The NanoVNA V2 3ghz is equipped with touch screen paddle for easy use..
  • 【Improved Frequency Range】The 3g NanoVNA-F has a measurement range of 50k-3ghz, which is larger than the old version. The TX/RX method can measure the complete S11 and S21 parameters，S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz).
  • S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)..
  • 【5000mAh Battery and Longer Standby Time】The antenna analyzer's 5000mAh large-capacity battery has longer standby time, up to 7 hours. When not used as a measuring instrument, it can be used as a power pack to charge your mobile phone..
  • 【Metal Shell Design】The vector network analyzer uses metal shield design to reduce the external interference and improve the measurement accuracy. The strong aluminum alloy makes it more durable..
  • 【Package Includes】NanoVNA-F V2 Host x1.
  • SMA calibration kit-Open/Short/50Ω Load x1.
  • SMA-KK Double-Head Female Hole Adapter x1.
  • SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Nee....
Check Stock