Top Resistive Wire Reviews

Aube by Honeywell TI040/U 7-Day Programmable Timer

  • Ideal for pool pumps. Use the TI040 to run your pool pump for 16-hours a day instead of 24 and recover the cost of the timer in as little as a year or two.
  • Three-operating modes: Manual (conventional on and off switch), Automatic, Temporary bypass.
  • Connection: terminals for No.14 to No.10 AWG wire, multi switch (3-way) compatible, 1.5 HP 120-Volt 30-Ampere (resistive), 10-Ampere (ballast), 2 HP 240-Volt 30-Ampere (resistive), 10-Ampere (ballast).
  • Dimensions (height by width by depth): 9.4-Inch by 7.2-Inch by 3.8-Inch.
Check Stock

UltraPro 60-Minute Countdown in-Wall Timer Mechanical Switch Spring Wound No Neutral Wire Needed Single-Pole Ideal for Lights Exhaust Fans Heaters Pumps 41081 White

  • 60-Minute Countdown – The dial operation makes setting the countdown easy and fast.
  • turn the dial to provide power for up to 60 minutes.
  • Ideal Use – The in-wall timer is perfect for lights, exhaust fans, heaters, pumps and is compatible with LED, CFL and incandescent lighting.
  • Face Plates - Includes white and light almond face plates to match existing switches and fits single- or multi-gang standard and rocker plates to integrate with your home.
  • Easy to Install – The single-pole timer and no neutral wire required simplifies installation, saving you time and energy.
  • Electrical Ratings – 125VAC, 50/60 Hz 20A general/resistive, 7A tungsten, 1HP motor, 250VAC, 50/60 Hz 10A general/resistive, 2HP motor, 277VAC, 50/60 Hz, 10A general/resistive.
Check Stock

Electrified - The Current State of Electric Vehicles

  • Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs.
  • Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time.
  • Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time.
  • Includes a single décor wall plate and fits most single or multi-gang rocker plates.
  • DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP.
Check Stock

VSDISPLAY 8.4\ 4 Wire resistive Touch Screen with USB Controller for 8.4 inch 800x600 LCD Panel

  • Compatible work For 8.4inch 800x600 LCD Panel.
  • USB Type Controller ,Power Requirements D.C.+5V.
  • Dimension Size: 187mm x 141mm Display Area: 172mm x 129.5mm.
  • Packing list: 1× 8.4inch 4-Wire Resistive Touch Screen VS084TP-A1 1× 4-Wire USB Controller Card 1× USB Cable 1× Converter Cable 1× CD (Driver for touch control card support operating system).
Check Stock

Stainless Steel Coil Jig 1.5mm-3.5mm Coil Winding Tool Wire Coil DIY Tool Professional Micro Coil Tool

  • Stainless Steel Coil Jig tool for many different purpose..
  • Easy to wrap the resistive wire by hand, works especially good..
  • Great tool for wire coiling, with a wide variety of sections on a single axis, 1.5, 2, 2.5, 3, 3.5 millimeter..
  • Stainless steel material, high quality and long performance life, without any casting lines or burrs..
Check Stock

UltraPro 60-Minute Countdown in-Wall Timer 2 Pack Mechanical Switch Spring Wound No Neutral Wire Needed Single-Pole Ideal for Lights Exhaust Fans Heaters Pumps 47977 White

  • 60-Minute Countdown – The dial operation makes setting the countdown easy and fast turn the dial to provide power for up to 60 minutes.
  • Ideal Use – The in-wall timer is perfect for lights exhaust fans heaters pumps and is compatible with LED CFL and incandescent lighting.
  • Face Plates - Includes white and light almond face plates to match existing switches and fits single- or multi-gang standard and rocker plates to....
  • Easy to Install – The single-pole timer and no neutral wire required simplifies installation saving you time and energy.
  • Electrical Ratings – 125VAC 50/60 Hz 20A general/resistive 7A tungsten 1HP motor 250VAC 50/60 Hz 10A general/resistive 2HP motor 277VAC 50/60 Hz 10A....
Check Stock

Kitpas Rice Bran Wax Art Crayons 12 Colors for Kids ages 3+, Window Art, Erasable, Water-Soluble, English Edition

  • Resistive Stylus：This is a resistive hard pen , portable , small and compact , with a size of only 12.5*1*1cm , which can bring a lot of convenience to your life. It can be used for writing touch on the whole series of handwriting board Switch and industrial control equipment. Not applicable to current 3G mobile phones and tablets , not applicable to IOS..
  • Free From Scratches and Fingerprints：This is a perfect tool for writing on the screen. The durable ABS material can protect your screen from scratches and fingerprints , and will not damage your screen..
  • With Spring Rope：There is a bungee cord on the top of each stylus , which can tie the pen to avoid accidentally losing the pen..
  • Scope of Application：This is a resistive screen pen , suitable for all resistive touch screen devices and mobile phones. Such as POS , PDA , industrial PC , car navigator and other resistive touch screen devices. As well as resistive films , MP4 , MP5 , writing boards , navigators , medical and other resistive screen devices. But it should be noted that this touch screen pen is not suitable for current 3G phones and tablets..
  • Support When You Need It：We can provide excellent after-sales service to our customers. When customers find that our products are faulty, you ....
Check Stock

Planar 997-5967-02 15” Touch Screen Point of Sale Monitor

  • Viewing Angle (typ) 160° Horizontal and 150° Vertical.
Check Stock

ROSENICE Stainless Steel Micro Coil Jig Coil Winding Tool Wire Coil DIY Tool

  • With a wide variety of sections on a single axis.
  • Made of stainless steel, durable and long lasting, without any casting lines or burrs..
  • A great coil winding Jig tool for many different purpose.
Check Stock

Genuine Ohmite M5090C Sa-200 Sa-250 Lincoln Rheostat 64 Ohm 150 Watt

  • 【Parameters】 -Model:Variable sliding potentiometer with knob.
  • 【Material】 -The ceramic wirewound potentiometer is consisted of ceramic core and a resistive wire wrapped to form a toroid coil with a wiper axle..
  • 【Features】 -The potentiometer carbon brush touches the resistance wire, and the resistance value is easy to adjust.
  • the rocker type manual operation, the alloy shaft, smooth and durable..
  • 【Function】 -The rheostat is used for the regulation of voltage and current in power equipment and the middle circuit, and controls the resistance of the circuit without interrupting the current..
  • 【Application】 -Ceramic wirewound potentiometer can be widely used as a motor speed regulator, suitable for pumps, fans and blowers or other applications that require high voltage and current..
Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

  • Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
  • Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
  • Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Check Stock

HiLetgo 2.4\ ILI9341 240x320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560

  • 2.4" diagonal LCD TFT Touch Panel display.
  • Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
  • Colorful, 18-bit 262,000 different shades.
  • 8 bit digital interface, plus 4 control lines.
Check Stock

AUTONICS CR18-8DN Autonics Capacitive Proximity Sensor, 12V-24V, 8 mm

  • Package Content: 1 x Capacitive Proximity Switch.
  • Detecting Distance: 1-20mm (Read description befor purchase).
  • Detecting Object: Metal, Water, Glass,etc (See conditions in the description!!!).
  • Operating Temperature: -25C to +65C (Non-freezing Condition).
  • Cable Length: 2m/6.56ft(Salida de corriente: 400mA (carga resistiva).
  • Temperatura de funcionamiento: -25C a + 65C (condición de no congelación).
  • Theory: Capacitance Sensor(Tipo de cable: Tipo de cable CA 2.
  • Tipo de apariencia del interruptor: Tipo de cilindro.
Check Stock