Top Resin Varnish Reviews

LET'S RESIN Metallic Pigment Powder, 5 Colors Fine Resin Pigment Powder, Each Bottle 20ml Shimmer Resin Color Pigment for Epoxy Resin Coloring, Polymer Clay and Other Crafts

  • ...tacky surface, can be diluted with water to create transparent, matte metallic effects..
  • Wide Application: LET'S RESIN metallic powder perfect for making epoxy resin crafts DIY, Slime, Soap Making, mobile phone's case, greeting cards, mix this powder with any mediums such as resin, water, gouache, watercolor, paint, varnish, glue, or paste to produce a metallic luster..
  • 100% Quality Assurance: If the epoxy resin color pigment you received was damaged due to transportation, just contact us, we will provide a full refund or free exchange. Due to the nature of pigment material the particles can make bonds and sit tight in containers making the containers appear slightly empty. However they are filled fully and powder sets in at bottom in transit..
Check Stock

Penofin Marine Exterior Oil Wood Finish - 1 Gallon

  • the flexible, breathable finish provides superior all-weather protection.
  • EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood.
  • covers easily and penetrates deeply to showcase the wood grain.
  • easier than applying marine varnish because there's no need to sand between coats.
  • CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods.
  • the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense.
  • AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin.
  • THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

Sikkens Cetol Marine Wood Finish Satin Quart: #INT IVA300Q

  • the flexible, breathable finish provides superior all-weather protection.
  • EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood.
  • covers easily and penetrates deeply to showcase the wood grain.
  • easier than applying marine varnish because there's no need to sand between coats.
  • CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods.
  • the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense.
  • AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin.
  • THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat.
Check Stock

TotalBoat-403794 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

Makita A-95532 Multi-Tool Sandpaper 120 Grit 10/pk

  • High-quality aluminum oxide grain abrasive for increased durability and sharpness.
  • Open-coat grain distribution and resin glue coating reduces grain clogging and improves finish on wood surfaces.
  • Heavyweight paper provides strong backing and reduces edge tear-out for more sanding.
  • Ideal for use on bare wood, paint, varnish, fillers, plastic and other materials.
  • Fits Makita and Bosch Multi-Tool sanding pads.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Quart, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-487750 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-492063 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

36.2 x 24 Extra Large Silicone Mat for Epoxy Resin Nonstick Silicon Mats for Crafts Jewelry Casting Non-Slip Kitchen Table Placemats for Countertop Protector Heat Resistant by Foepoge Black

  • 【Oversize 36.2" x 24"】The silicone countertop protector mat is huge enough to prevent resin splatters or paint stains. Used under jewelry epoxy....
  • 【Extra Thick and Food Grade】The silicone sheet for crafts is made of food grade silicone, which is flexible and cuttable. No fade and no deform.....
  • 【Nonstick and Easy to Clean】The silicone mat for resin crafts is matte both sides, no sticky side that may take the varnish off of wood table and....
  • 【Great Heat-Resistance】The large silicone mat heat resistant can bear the temperature from -30 up to 210 ℉. Extra thick design provides a better....
  • 【Easy to Carry and Storage】Easy to fold or roll up, you can take this nonslip painting mat everywhere for resin project, polymer clay playing,....
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Marine Wood Finish - Ideal for Boats, Home and Outdoor Teak Furniture (Natural Teak, Quart)

  • DURABLE, PROTECTIVE MARINE GRADE WOOD FINISH has a unique linseed oil & resin formula with maximum wear protection.
  • use above the waterline to finish & seal teak, mahogany & other wood on your boat.
  • VERSATILE FINISH FOR WOOD is also ideal for DIY home use on outdoor teak furniture, front entry doors, patio chairs and tables, indoor wood stairs, handrails, trim and more.
  • the flexible, breathable finish provides superior all-weather protection.
  • EASY TO APPLY, NO SANDING BETWEEN COATS: Apply 2-3 coats by brush or roller to clean, dry wood.
  • covers easily and penetrates deeply to showcase the wood grain.
  • easier than applying marine varnish because there's no need to sand between coats.
  • CHOOSE NATURAL TEAK, SATIN OR GLOSS FINISH: The natural teak finish is ideal for teak and other dark hardwoods.
  • the gloss finish can be used alone or applied over the teak or satin finishes to get the look of varnish - without the extra effort and expense.
  • AVAILABLE IN QUART SIZE in Natural Teak, Gloss, or Satin.
  • THINNING: Not necessary, but if desired, thin up to 50% with mineral spirits for the first coat.
Check Stock