Top Residential Heaters Reviews

Camco5" Residential Screw-In Water Heater Element Wrench - Fits All Standard Screw In Elements (09883)

5″ long Zinc plated water heater element wrench.
Compatible with all standard screw-in elements and 1-1/2″ hex on residential screw-in water heater elements.
Cross holes allow you to use a screwdriver for enhanced torque and to help remove and install element with ease.
Fits into offsets where an adjustable wrench can’t.

Check Stock

Weil Mclain 633-900-130 Thermostat (Aquastat) Kit For Residential Indirect Water Heaters

Weil Mclain 633-900-130 Thermostat (Aquastat) Kit For Residential Indirect Water Heaters.
For Use With GOLD / Ultra Plus 30/40/60/80.
Includes Knob And Instructions 90°F-160°F Adjustable Range Does NOT Include Cover Plate.

Check Stock

Camco 11231 Stand Kit, 21" Gas Water Heater - 50 Gallon Capacity, Silver

Gas Water Heater Stand: Allows you to place your residential gas water heater 18-inches above the floor (as required by the National Fuel Gas and Plumbing Codes).
Compatibility: Fits gas water heaters with a diameter of 22-inches or less and a capacity of 50-gallons.
Measurements: 21-inches x 21-inches x 18-inches.
Durable Construction: Constructed of durable, 18-gauge galvanized sheet metal.
Easy to Install: Minimal assembly is required.

Check Stock

Infratech 61.25\ Stainless Steel Electric Heater Flush Mount Frame

VERSATILE — Perfect for indoor or outdoor use in commercial or residential settings..
DURABLE CONSTRUCTION — It's made to endure the elements being constructed from stainless steel..
PACKAGE — Supplied with hi-temp fixture whip and hi-temp ceramic wire nuts..
COMPATIBILITY — Designed to fit 61.25" Infratech Patio Heaters..
INSTALLATION TIPS — This frame is only to be used on a flat non-sloped ceiling.
frame and heater cannot be installed on a pitched angle..

Check Stock

Easyflex Yellow Coated Stainless Steel 3/4 MIP x 3/4 FIP Full Flow 1 OD Gas Flex Connector 18

Yellow coated polymer exterior & double corrugated for extra protection and flexibility.
Comes with MIP and FIP flare fittings with 3/4" full flow inner diameter.
Compatible with Brasscraft CSSB21 for high rating BTU.
CSA certified and ideal for indoor and outdoor use.
Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves.

Check Stock

Gekufa RV Water Heater Cam Lock Iron Galvanization Spring Loaded Latch RV Door Latch Lock Fastener Trailer Water Heater Cover Cam

【High Quality and Strong Material】This Heavy-Duty lightweight dual hex wrench socket features A3 Carbon Steel Galvanized and non-corrosive material. AISI A3 Steel is a high-quality Cold work tool steel.
It belongs to the high-quality, high carbon alloy tool steel. Allow you to easily remove the most major Residential screw-in water heater elements and anode rod size, including RV and Camper Travel Trailer.
【Size】This wrench socket has One end size 1-1/2-inch hex removing all residential screw-in water heater elements and another end size 1-1/16-inch hex removing all anode Rod 3/4" NPT. Allowing you to do regular maintenance water heater easily and not requires any additional tool.
【Convenience】The overall length is 10 inch (250mm) with 0.31" (8mm) cross holes for turning (you can use any screwdriver), providing the clearance needed for a correct connection and easy loosening - meaning you won't damage the bolts or your hands in the process, given much room and space for maintenance your water heater.
【Tips】Servicing on your water heater is a must if you want to protect your tank and keep it at its best for years to come.
maintenance of your water heater is just a thing in the past because this tube wrench socket so easy to remove and re-....

Check Stock

6' x 35 FT Single Ply Stainless Steel Chimney Liner Kit

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney..
304 Stainless Steel construction provides superior corrosion resistance over our competitors galvanized steel or 430 stainless steel construction..
Rain cap with 3/4 inch spark arrestor mesh will keep birds and small critters out of your chimney while restricting hot coals from escaping the chimney.
Features a twist lock connection and can be easily removed for cleaning.
Certified to UL103HT and perfect for wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, outdoor wood furnaces, or other residential heating appliances fueled by wood, gas, coal, or oil.

Check Stock

AllFuelHST Chimney Cap with Spark Screen for 8\ Inner Diameter Chimney Pipe

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney..
304 Stainless Steel construction provides superior corrosion resistance over our competitors galvanized steel or 430 stainless steel construction..
Rain cap with 3/4 inch spark arrestor mesh will keep birds and small critters out of your chimney while restricting hot coals from escaping the chimney.
Features a twist lock connection and can be easily removed for cleaning.
Certified to UL103HT and perfect for wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, outdoor wood furnaces, or other residential heating appliances fueled by wood, gas, coal, or oil.

Check Stock

ONENESS 369 Dual Hex Wrench Removal Tool for Anode and Water Heater Element 1-1/16 in x 1-1/2 in x 10 in - Fit All Residential and RV Camper Travel Trailer Motorhome

【High Quality and Strong Material】This Heavy-Duty lightweight dual hex wrench socket features A3 Carbon Steel Galvanized and non-corrosive material. AISI A3 Steel is a high-quality Cold work tool steel.
It belongs to the high-quality, high carbon alloy tool steel. Allow you to easily remove the most major Residential screw-in water heater elements and anode rod size, including RV and Camper Travel Trailer.
【Size】This wrench socket has One end size 1-1/2-inch hex removing all residential screw-in water heater elements and another end size 1-1/16-inch hex removing all anode Rod 3/4" NPT. Allowing you to do regular maintenance water heater easily and not requires any additional tool.
【Convenience】The overall length is 10 inch (250mm) with 0.31" (8mm) cross holes for turning (you can use any screwdriver), providing the clearance needed for a correct connection and easy loosening - meaning you won't damage the bolts or your hands in the process, given much room and space for maintenance your water heater.
【Tips】Servicing on your water heater is a must if you want to protect your tank and keep it at its best for years to come.
maintenance of your water heater is just a thing in the past because this tube wrench socket so easy to remove and re-....

Check Stock

AllFuel HST 6' x 48' 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney..
304 Stainless Steel inner and outer walls with laser welded seams provide superior corrosion resistance over our competitors galvanized steel or 430 stainless steel construction.
Insulated with a ceramic fiber blanket to provide a 2" clearance to combustibles while maintaining high internal flue temperatures for a proper draft.
Twist-Lock connections make assembly fast and easy while the included locking band provides extra security and keeps your chimney sealed tightly.
Certified to UL103HT and perfect for wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, outdoor wood furnaces, or other residential heating appliances fueled by wood, gas, coal, or oil.

Check Stock

AllFuel HST 6' x 36' 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney..
304 Stainless Steel inner and outer walls with laser welded seams provide superior corrosion resistance over our competitors galvanized steel or 430 stainless steel construction.
Insulated with a ceramic fiber blanket to provide a 2" clearance to combustibles while maintaining high internal flue temperatures for a proper draft.
Twist-Lock connections make assembly fast and easy while the included locking band provides extra security and keeps your chimney sealed tightly.
Certified to UL103HT and perfect for wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, outdoor wood furnaces, or other residential heating appliances fueled by wood, gas, coal, or oil.

Check Stock

EasyFlex Yellow Epoxy Coated Stainless Steel with Ball Valve 1/2' MIP x 1/2' FIP x 36' (5/8' OD) Gas Appliance Connector (36' x 1/2'), Packaging and Color May Vary

Yellow epoxy coated exterior & double corrugated for extra protection and flexibility, MIP and FIP flare fittings.125,000 BTU Rating.
Quick and easy installation. Can be manipulated by hand making it easy to maneuver in confined areas..
Certified by CSA for indoor and outdoor use. CSA 6.10, CSA 6.27, ANSI Z21.24, ANSI Z21.75,.
Application includes residential/commercial tank and tankless water heaters, boilers, fryers, ranges, stoves..

Check Stock

HQMPC Outdoor Spigot Hose Ball Valve Hose Bibb Garden Hose Connect Bibb Shut Off Valve No Lead Brass Stop Valve 1/2″ MNPT Connect 3/4″ GHT Outlet 1 Pcs

Hose Bibb: No lead material safty for drinking water.
Garden Hose Connect Bibb thread: 1/2″MNPT Inlet 3/4″ GHT Outlet ,for garden hose and hose connectors Commercial and Residential Plumbing and Heating Systems, Including Boilers and Water Heaters.
Brass hose bibb: Heavy duty NO Pb body , large water flow , Ryst resistant handle.
Outdoor Spigot pressure: Maximum 145 Psi Working pressure.
After sale service: If you have any questiosn fit our products, please contact service team, we will solve problems in time.

Check Stock