SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter
...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....
Smart IR RF Universal Remote: Infrared WiFi Remote Controller, IR/RF Smart Home Hub, IR Emitter and RF Blaster for Fan AC TV DVD, Tuya/Smart Life App Control, Compatible with Alexa Google Assistant
...with 2.4 GHz WiFi, you can remotely control control appliances via the Smart Life/Tuya app even away from home.
and turn your smartphone into a universal remote. You can also share the device with your family. (NOTE: Does not support 5GHz Wifi).
VOICE CONTROL & INTELLIGENT LINKAGE FUNCTION: Infrared Universal Remote Blaster compatible with Alexa and Google Home for simple, hands-free voice control, such as “Alexa, next channel on TV” … Set your smart routine in the app.
For instance, When motion is detected, turn on your lights via remote control..
DIY FUNCTION: Support DIY function to manual learning of the original controller as needed, Copy same function from original IR/RF remote to control Devices such as fireplaces, heater, ceiling fans, solve your problem of finding a remote controller or the appliance model is not available on the app..
SIMPLE OPERATION & AFTER SALES: No hub required and no monthly fee. Easily add devices in the App. IR blaster comes with a USB cable, you may plug wherever there is a socket or USB port. Hidden back USB power supply, long-term power supply, say goodbye to power outages. Gaoducash provide 24-months warranty for Wi-Fi Remote Control..
Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)
...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....
MOES WiFi RF IR Smart Home Universal Remote Controller for TV Air Conditioning Infrared RF Appliances, Control AC TV DVD CD AUD SAT, Tuya/Smart Life App Control, Voice Control with Alexa and Google…
1.【Note】Customized DIY learning function.
copy same function from original IR remote to control Devices such as fireplaces, heater, ceiling fans.
Only supports 2.4G Wifi connection.For brands supported by IR blaster, please check the documentation and use the search function to inquire..
2.【All-in One Control】Advanced design with RF and IR for high compatibility.
all-in-one activates air conditioners, TVs, fans, DVD players, STBs, TV boxes, infrared devices, and RF appliances such as lights, switches, roller blinds, and more.
stores thousands of IR codes (supports IR 38 KHz and RF 433 /315 MHz).
3.【Multiple RF protocol】Multiple remote control RF protocol ensures effortless control of different 433 MHz RF devices.
4.【Remote Control from Anywhere】WiFi and 4G enabled for remote control from anywhere via the Smart Life/Tuya app.
control appliances away from home and turn your smartphone into a universal remote..
5.【Hands-free Voice Control】Compatible with Alexa and Google Home for simple, hands-free voice control, such as “Alexa, set A/C to 77 degrees”.
widely compatible with a range of devices.
for full list, check attached list or Smart Life app..
OREI 1x4 HDMI Extender Splitter Over Single Cable CAT6/7 1080P With IR Remote EDID Management - Up to 132 Ft - Loop Out - Low Latency Black
Distribute 1 HDMI source to 4 HDMI displays over Network Cable Simultaneously..
HDMI Transmitter is equipped with 4 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor..
IR Remote Control. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables....
Plug & Play Setup without any Software Installation. Compatible with CAT6/6a/7 Network Cables. The highest Resolution Supported is 1920×[email protected],....
Includes: 1 x Transmitter, 4 x Receivers, 4 x Power Adapter, 1 x IR Blaster Cable, 4 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's....
Brihome Smart IR Remote Mini WiFi Universal IR Blaster Hub One for All Control AC Air Conditioner TV STB DVD Fan TV Box Compatible with Alexa Google Assistant
ALL IN ONE CONTROL: the smart IR remote can control all infrared appliances, such as TV, Air Conditioner, fan, DVD, STB, TV box etc. Support 80,000+IR....
APP CONTROL: can control infrared appliances with "Smart Life" APP anytime anywhere (Compatible with Android & iOS)..
SMART SCENARIO: can control multipe devices in one tape and run the devices as set. Or control automatically the device according to conditions such....
VOICE CONTROL: works with Alexa, Google Assistant, and IFTTT. The smart IR blaster can control your infrared home appliances with a simple voice....
360 DEGREES REMOTE CONTROL: as long as there is no obstacle to block the universal smart IR remote control, it can be within 10 meters distance, 360....
TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit
IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
Place the IR emitter blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
Compatible with most A/V equipment with infrared sensors (not RF).
OREI 1x4 HDMI Extender Splitter Multiple Over Single Cable CAT6/7 1080P with IR Remote EDID Management - Up to 165 Ft - Loop Out - Low Latency - Full Support
Distribute 1080p 1 HDMI source to 4 HDMI displays over network cable simultaneously, Splitter included - no Switcher needed - power over LAN cable -....
Hdmi transmitter is equipped with 4 port Cat6 output. And 1 additional HDMI output to connect to a local display or monitor..
Ire remote control. Supports 2060Hz IR pass back, control a DVD player or other HDMI video source from a remote location with the included IR cables....
Plug & play setup without any software installation. Compatible with Cat6/6a/7 network cables. The highest resolution supported is 1920×[email protected],....
Includes: 1 x Transmitter, 4 x receivers, 1 x Power adapter, 1 x IR blaster cable, 4 x IR receiver cables, 1 x user Manual. 1 Year Ore Manufacturer's....
3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.
【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).