Top Release Agent Reviews

Adhesive Guru Silicone Mold Release Aerosol Spray (13.5 fl oz) Lubricant Agent for Epoxy Resin Molds (1 Pack)

  • Perfect For Many Projects – Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material. Silicone mold release spray for epoxy resin molds used for silicone molds, candle molds, wax and urethanes. This spray is easy to use, features high quality ingredients & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our Adhesive Guru mold release for epoxy resin ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Special Formula - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The special formula ensures that your projects come out exactly the way you want!.
  • Extend the Life Of Molds - Use this mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Non-stick silicone lubricant prevents sticking, is colorless and odorless. Using our Adhesive Guru silicone spray mold release when creating projects can help prolong the life of your molds by preventing sticking..
  • Easy to Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simpl....
Check Stock

C Font Cuff Bracelet Silicone Bangle Mold Clear Round Bracelet Jewelry Casting Resin Mould

  • It can be used as Resin, Cabochon, Polymer Clay,Gum Paste, Pmc, Wax, Candle, Soap Mold.
  • Bracelet model finish product : inner diameter 63mm, height 32mm, groove width 6mm, opening width 31mm..
  • Cleaning: Wipe with alcohol or direct water to wash and clean..
  • Use: With silicone mold release agent is more durable, with silicone mold release agent is more durable.
  • Package included: 1 x C font open cuff silicone bracelet mold.
Check Stock

Dynamic Discs Classic Agent Disc Golf Putter | PROTOYPE | Special Edition Limited Run Slightly Overstable Beadless Frisbee (White)

  • NEW RELEASE - The Agent specializes in consistent flights and accurate putts. Your competition will be in danger when the Agent appears on the course. With a beadless profile and slightly overstable flight, it's no secret you can depend on the Agent to perform..
  • FLIGHT RATINGS - The Agent has a Speed: 2 Glide: 3 Turn: 0 Fade: 1.
  • MAKE MORE PUTTS - The Agent wants to go in the basket. It has a rounded bottom without a bead so it will fly great out of your hand. Ready to switch putters? The agent is the perfect balance between the Judge and Warden for people who want the best feeling putter around..
  • PROTOTYPE - Now is your chance to buy the newest putter on the market! These PDGA approved discs are the prototypes straight from the factory. Now is your only chance to get this special run and special stamp of this great putter!.
  • ABOUT CLASSIC - Classic plastic is the perfect blend of tackiness and firmness for players looking for a stiff golf disc..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

Stronghold Games Amul

  • In city of Spies: double Agent, an expansion to the 2016 release, city of Spies: estoril 1942, new Spies arrive in Town and with new abilities.
  • Besides estoril, players will also fight in lisbon, where they will find new ways to create the best Network of Spies.
  • City of Spies: double Agent expansion will offer an option for a 5th player.
Check Stock

Wallfire 2 Pieces Ashtray Epoxy Mould DIY Silicone Resin Kits Triangle Ashtray Mold with Lid for Succulent Planter Bowl Ashtray Candle Soap Pen Holder

  • High- quality material--- The resin mold kit is made of environmentally friendly liquid silicone, which has high transparency and better mirror effect. The liquid silicone mold has a long service life and is not easy to deform.
  • Easy to release--- The interior is smooth and shiny, which reduces the need for trimming and polishing. After your project is fully cured, it is easy to pull out the completed resin project, and then you can use a release agent.
  • Reusable and environmentally friendly silicone mold--- The smooth and silicone ashtray resin mold is made of high- quality silicone and can be cast indefinitely. It is an ideal material for making resin molds, because it can be used as a natural mold release agent, which is everyones Great choice.
  • Mold size --- Ashtray: 14. 95* 15cm/ 5. 88* 5. 90in.
  • Lid: 11. 7* 12cm/ 4. 60* 4. 72in, the size is appropriate.
  • About us--- Thank you for your choice. If you encounter any problems during the purchase process, please communicate with our customer service in time. We will solve your doubts at any time. I hope you can have a pleasant shopping experience, thank you..
Check Stock

Polytek Pol Ease 2300 Release Agent (1 Can)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Polytek Pol Ease 2300 Release Agent (Case of 12 cans)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Veneer Stone Rubber Molds for Concrete, Retaining Wall Block 10', Recycled Material

  • Create your own custom color retaining wall blocks and save money.
  • No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds.
  • Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc..
  • Made in the USA from plastisol rubber, including recycled plastisol.
  • Production quality molds can be used hundreds of times.
Check Stock

Veneer Stone Rubber Molds for Concrete, Retaining Wall Block 11.5', Recycled Material

  • Create your own custom color retaining wall blocks and save money.
  • No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds.
  • Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc..
  • Made in the USA from plastisol rubber, including recycled plastisol.
  • Production quality molds can be used hundreds of times.
Check Stock