Top Relay Control Reviews

LG EBR74164805 Genuine OEM Relay Control Board for LG Range/Stove/Ovens

This LG Relay Control Board is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
Replacement LG brand Range/Stove/Oven Relay Control Board operates relays to regulate the oven elements.
LG EBR74164805 Range/Stove/Oven Relay Control Board receives signals from the main oven control board.
High quality LG OEM EBR74164805 Range/Stove/Oven Relay Control Board is manufactured with premium materials for durability and exact fit, be sure to....
Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.

Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..

Check Stock

RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights

1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input....

Check Stock

12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay Module 433Mhz Transmitter Receiver Kit Universal Remote Controller for Lights Ceiling Fan Garage Door Opener Gate Car & More

1. Wireless Remote Control Kits - The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
2. Home Automation Security Relay - Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input vol....

Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.

Check Stock

SSR-100, DC-DC Solid State Relay 5-220V DC with Non-Contact Switch, SSR-100 DD

Control Method: The solid state relay uses DC-DC control method, which can provide stable performance..
Load Current: 100A, Load Voltage: 5-220VDC, Control Voltage: 3-32VDC, Control Current: DC: 5-50mA.
Installation: The solid state relay uses bolted installation method, easy to install and remove..
Heat Dissipation: The relay has pure aluminum heat sink base plate for fast heat dissipation..
Material: The solid state relay is made of thyristor and optoelectronic with non-contact switch..

Check Stock

QCQIANG JQX-13F 8 Pin-10A AC 110V Electromagnetic Power Relay with Female Spade Electric Wire Connector(3pcs)

JQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay.
Contact : 7A 250VAC, 12A 120VAC/10A 125VAC, 10A 28VDC.
Coil 5 pins mini SPST power relay pin quantity : 5 Pin.
material : plastic, metal, electronic component.
Power relay size (Approx.) : 1.8 x 1.4 x 1.9cm / 0.7"""" x 0.6"""" x 0.7""""(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc..
Power relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.

Check Stock

Anfukone T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Panel

It is perfect used in the remote control, communication, automatic control system, electronic equipment's..
Relay contacts : 003cbr003e Terminals 1 and 8 public points ；003cbr003e Terminals 2 and 7 Relay Coil Voltage.
003cbr003e Terminals 3 and 6 N/O Normally Open.
003cbr003e Terminals 4 and 5 N/C Normally Closed.
Total Size (Approx. ): 1. 4" x 1. 4" x 2. 6".
003cbr003ePackage : 1 x Power Relay & Socket..

Check Stock

Wireless Rf Remote Control Switch, Safe Connection Receiver Relay Switch 220v 433mhz(1 CH)

✔Easy to set up and easy to use. The relays are very simple to set up and use. Specifically designed to control a variety of electrical equipment via wireless signals..
✔Small size, stable and reliable performance, high receiving sensitivity. The relay is designed to be small and simple, does not take up space, and powerful performance can be used for a long time..
✔The relay supports fixed code and learning code, and supports 1-channel or 2-channel receiver relay switches, which fully meet the needs of different users..
✔Excellent security. The circuit board of the relay is safely packaged, the circuit board is exquisite, and the wiring is safe. Safety protection measures are perfected to protect your safety..
✔A wide range of applications. From simple home remote control to door, window, lifting equipment, access control, up and down controller, alarm system industrial control, security system and other automatic controllers can be used in various fields..

Check Stock

WinnerEco 5pcs 1 Channel DC 5V Relay Switch Module for Raspberry Pi ARM AVR

1-channel relay interface board which can be controlled directly by a wide range of microcontrollers. Controllers includes AVR, PIC, ARM, PLC, etc..
Relay output maximum contact is AC110V ~ AC250V 10A and DC30V 10A..
Standard interface can be directly connected with microcontrollers..
Red working status indicator for power on indication.Green working status indicator for relay the switch..
It can control various appliances and other equipments with large current.Widely used for all MCU control, industrial sector, PLC control, smart home control..

Check Stock

Solid State Relay, 90 to 280VAC, 25A

Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
Model: XRE-1D4840 Solid State Relay 40A DC to AC..
Input voltage: 3-32V DC Output voltage: 24-480V AC.
Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Check Stock

0.5S-300H 11 Pins Knob Control Delay Timer Relay H3CR-A Waterproof Time Relay 100-240VAC 100-125VDC for Automated Control Circuit

【Wide Field of Applications】: Our 11 pins knob control delay timer relay is widely applied to automated control circuit such as remote control,....
【Super Wide Adjustable Time Range】: The adjustable time range is super wide, which can last from 0.5 seconds to 300 hours. Users can adjust the....
【Wonderful Shell】: This 100-240VAC 100-125VDC knob control time relay adopts high quality plastic case, and this wonderful shell is waterproof and....
【High Precision】: Our 0.5s-300h H3CR-A waterproof time relay has stable performance, and a long service life. This delay timer relay also has high....
【Specifications】: Model: H3CR-A Rated voltage: 100-240VAC 100-125VDC Voltage tolerance: ±10% Power consumption: about 1.9VA Time range: 0.5....

Check Stock