Top Reducing Flanges Reviews

Suburban 6259APW Flush Mount 10 Gallon Water Heater Door-Polar White

  • Made of galvanized steel and finished in a tough, high-solids baked enamel, making it especially chip and corrosion resistant.
  • The standard door frame is installed without bending flanges or installing corner gussets, so installation is easier and the seal is better than competing units.
  • The flush mount door is pulled tight against the sidewall without using screws that penetrate the exterior, giving it a neater appearance and reducing the possibility of leaks.
Check Stock

Dynatex 47181 DynaGrey Low Volatile RTV Silicone Gasket Maker, -85 to 500 Degree F, 3.8 oz Carded Tube, Grey

  • Eliminates the need for precut gaskets, reducing weight, inventory and cost.
  • Cure at room temperature and seal rigid assemblies of any shape or size.
  • Withstands temperatures up to 300ºF (148ºC).
  • For use on rigid flanges and to seal metal assemblies.
Check Stock

HomiShare Floor Flange 2" Pipe Flange 4Pcs Industrial Malleable Iron Pipe Fittings with 4 Threaded Holes, Industrial Vintage Style Floor Flange for DIY Industrial/Home Decoration(4 Pack, 2")

  • High Quality Floor Flange: The floor flange uses premium cast iron as raw material. Each floor flange in our factory need to be tested carefully and protected well. So it is firm enough to use for a long time. All flanges are made from the same mould to ensure precision..
  • Durable and Anti-rust: Compared to other flanges on the market, our flanges have an anti-rust coating on the surface. This coating can effectively prevent the flanges from rusting and corroding, which have a longer life-circle than others..
  • Good Design：Our pipe flange shows vintage lettering on the front surface. Different with other three holes flanges on the market, it has four threaded holes. So the flange can be fixed more stable. In addition, the bottom of our flange is flat and smooth to fit the wall..
  • Easy to Install: The four mounting holes and flat surface help you easily install the flange. The package includes four flanges. You can use them to fasten various pipes, fittings or other industrial equipment. It is very convenient to assemble and disassemble when you need..
  • DIY and Multiple Functions: You can use our flanges with other industrial fittings for a variety of practical applications such as industrial handrail, door handle, rack, shelf, craft ornaments, etc. Just unl....
Check Stock

Willow Pump Breast Pump Flanges, 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags (Clear, 21mm)

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into storage milk bags (sold separately), no need to transfer..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm..
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re ready to feed. These flanges are easy to clean, dishwasher safe and BPA free..
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally enclosed and spill-proof in any po....
Check Stock

Lovejoy 68514436414 36414 Size 7E 2-Piece Design S-Flex Coupling Sleeve, EPDM Rubber, 4.34\ OD, 2.19\ Length, 725 in-lbs Nominal Torque

  • For use with Lovejoy E type S-Flex series flexible coupling assembly (sold separately).
  • EPDM synthetic rubber for transferring and absorbing shock load.
  • Two halves with a metal retaining ring for applications where the coupled shafts are difficult to separate.
  • Teeth help to distribute torsional load across the sleeve and flanges, reducing wear and extending service life.
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

Maymom Flange 15mm Inserts Compatible with Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony, to Reduce 24mm Down to 15 mm; 2pc/Each

  • Maymom 15 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 15 mm. Also compatible with Momcozy/LegendairyMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups ( NOT for 27 mm M1 cups).
  • Also fits Freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Willow Pump Willow Go™ Wearable Breast Pump Flange Set, 2 Pack | Breast Shield for Hands Free, Cord Free Double Electric Breast Pump | Clear, 24mm

  • REUSABLE FLANGES: Flanges are clear colored for nipple visibility and alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into Willow Go Reusable Breast Milk Containers and easily transfer to a storage container or bottle when you’re ready to feed..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm. In addition, 24mm flanges are compatible with sizing inserts for mamas who measure smaller than 21mm..
  • EASY TO CLEAN: Dishwasher-safe for easy cleanup..
  • USE WITH THE WILLOW GO PUMP: Exclusively designed to work with the Willow Go Wearable Breast Pump..
Check Stock

Maymom Flange Inserts 19 mm for Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony to Reduce 24mm Nipple Tunnel Down to 19 mm; 2pc/Each

  • Maymom 19 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 19 mm. Also compatible with Momcozy/LegendaryMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra – Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups (not for 27 mm cups).
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Willow Pump Breast Pump Flanges 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags Clear 27mm

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective....
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast....
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm,....
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re....
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally....
Check Stock

Maymom Flange Inserts 17 mm for Medela Spectra 24 mm Shields/Flanges Momcozy/Willow Wearable Cup Compatible with Medela Freestyle Harmony to Reduce 24mm Nipple Tunnel Down to 17 mm 2pc/Each

  • 17 mm inserts to use with Medela/spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 17 mm. Also suitable for Ameda Mya Pro,....
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm....
  • Can be compatible with Spectra 24mm flanges, Motif Luna 24mm flanges, Ameda Mya 24mm flanges, Ameda Mya Pro 24mm flanges, Ameda Purely Yours 25mm....
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock