Top Reducing Elbow Male Threaded Reviews

Legris 3199 06 10 Nylon & Nickel-Plated Brass Push-to-Connect Fitting 90 Degree Elbow 6 mm Tube OD x 1/8 BSPP Male

  • 90-degree male elbow to connect a tube to a female threaded connection at a 90-degree angle.
  • Push-to-connect metric tube connection on one end and male BSPP threads on the other end.
  • Nylon body and nickel-plated brass sub-base.
  • Handles pressures up to 290 psi (20 bar), an operating temperature range of -20 to +80 degrees C (-4 to +176 degrees F), and a vacuum capability of 755 mm Hg.
Check Stock

Eaton Aeroquip 2024-2-4S 90 Degree Male Elbow JIC 37 Degree & NPT End Types Carbon Steel 1/4 JIC m x 1/8 NPT m End Size 1/4 Tube OD 1/8 Male Pipe Size Pack of 4

  • 90-degree male Joint Industry Council (JIC) elbow to connect to an National Pipe Thread (NPT) female thread at a 90-degree angle.
  • Male JIC threads on one end and male NPT threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eaton Aeroquip 2043-6-6S 90 Degree Bulkhead Union Elbow JIC 37 Degree End Types Carbon Steel 3/8 JIC m End Size 3/8 Tube OD

  • Bulkhead 45-degree elbow to connect two tubes through a panel and change tube direction by 45 degrees.
  • Male JIC threads at both ends for connecting two threaded tubes.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

HangTon SD20 3 Pin Connector Quick Disconnect Waterproof IP68 Right Angle Cable Plug Panel Mount Socket, 25 Amp Power 14 AWG Wire

  • 3 pin panel mount socket and 90-degree angle male plug, any direction elbow.
  • Cable outer diameter range: 8-12mm, Wire Size: ≤4mm² or 12AWG 14 AWG, Contact Diameter: Φ2.8mm. Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment.
  • Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.
Check Stock

Medline MDT829298H Knit Elastic Heel/Elbow Protectors One Size Green

  • COPPER COMPRESSION ELBOW SLEEVE is made of copper infused compression threads to reduce inflammation, sustain connective tissues and in blood and....
  • ELBOW SLEEVE Stays in place with a nonslip silicone band while providing mobility of the joint while heavily exercising, weightlifting, golfing,....
  • COMPRESSION SLEEVE IS MADE OF breathable odor reducing fabric to wick away moisture for all day comfort worn during the day or night. The high quality....
  • HELP RELIEVE ELBOW PAIN with mild compression to deliver a controlled amount of pressure reducing discomfort. Keep elbows, arms and joints compressed....
  • COMPRESSION ELBOW SLEEVE Sizing: Measure circumference of the upper arm, about 2-3 inches above elbow. Medium 10.5-11.5 inches.
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD X 1/8NPT Thread Pneumatic Air Push Fit Lock Fitting

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Tube and Thread Size : 4mm OD x 1/8" NPT Male.
  • Operating temperature:-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 6mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 5pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature:-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 2pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature:-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 12mm Tube OD X 1/4NPT Thread Pneumatic Air Push Fit Lock Fitting 2pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Tube and Thread Size : 12mm OD x 1/4" NPT Male.
  • Operating temperature:-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

Moon 379-2522524 Aluminum Fire Hose Adapter, Rocker Lug Swivel, 2-1/2\ NH x 2-1/2\ NH Double Swivel RL Female

  • National Hose (NH) female adapter for connecting a hose to a NH male threaded end.
  • Female threads on both ends for connecting two hoses.
  • Aluminum for resistance to corrosion and chemicals.
  • Swivel for reducing twisting or crimping of hose.
Check Stock

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

  • Pro 36ft kit, threaded connector wire running rod.
  • 1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
  • 5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.
Check Stock

10pcs Thread Repair Sleeves Reducer Nuts M8 Female and M12 Male Thread Conversion

  • USES - The repair nut is an industrial fastening part, which is mostly used with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, the repair nut can be used to repair the threaded hole in an efficient manner..
  • WIDE RANGE OF APPLICATION - These Repair Nuts are widely used in aviation, automobile, electronic communication, computer, mold, mechanical equipment and other manufacturing fields..
  • FEATURES - The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • FOR EXAMPLE - If the M8 thread is slippery, and if you want to continue to use the M8 thread after the restoration, use this method to first expand the M8 thread to the M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because the material of this reducing diameter is stainless steel, it will make the M8 thread more firm.
Check Stock