Top Reducing Bushings Reviews

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Orangatang Knuckles Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY BUSHINGS – Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding..
  • RESPONSIVE DESIGN – Two unique shapes for highly responsive and customizable turning. Compatible with most trucks. The insert barrel features a small “step” to fill the gap between the kingpin and the hole of the hanger, reducing play in the assembly for a more precise response. The gumdrop is a smooth and subtle blend between a barrel and the more traditional cone shape, providing enhanced agility. The rounded edge allows for ultra-smooth turn initiation and improved interface with the washers..
  • HIGH-REBOUND FORMULA – Poured in our extremely high-rebound Randy Thane formula, ideal for responsive, energetic turning..
  • THE PERFECT SET – Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers..
  • SOFT – Great for tight turns and maximum agility..
Check Stock

uxcell Flange Sleeve Bearings 8mm Bore 12mm OD 12mm Length 16mm Flange Dia 2mm Flange Thickness Sintered Bronze Self-Lubricating Bushing 4pcs

  • Size - Bore Diameter: 8mm, Outside Diameter: 12mm, Total Length: 12mm, Flange Diameter: 16mm, Flange Thickness: 2mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

SHIMANO RD-M640 Zee Shadow Plus 10 Speed Rear Derailleur (Use with 11-32/11-36 Cassette)

  • Shadow Plus technology keeps the low profile shape reducing chainstay and other contact, and adds a chain tensioning device reducing noise and dropped chains.
  • Compatible with Dyna-Sys 10 speed Shimano products.
  • Aluminum construction with sealed bearing pulleys.
  • 4 fluoric coated link pivot bushings for smooth operation.
Check Stock

United Pacific 70758 Yellow Striped '9' Ball Gearshift Knob

  • Beautiful gloss yellow '1' pool ball gearshift knob.
  • Hex screw mount design, includes nylon reducing bushings to fit smaller shifters.
Check Stock

Lifegard Aquatics QL-80 UV Sterilizer

  • Solid cap features Clear View Port to allow visible light (no UV) to pass through and indicate bulb is operating.
  • The replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100-percent of the water flow past UV light.
  • The Splash Boot creates water resistant seal around electrical connection.
  • Its unique 4-pin connectordesign allows easy bulb replacement without shutting down the system.
  • All Lifegard Mechanical, Chemical, Heater, and UV Sterilizers include 3/4-inch threaded reducing bushings if threaded installation is desired.
Check Stock

Brandit Lumberjack Winter Cap Red/Black Checkered

  • ...etween flexible and stiff, the LUMBERJACK straight bar is a performance bar, making it ideal for snatches, cleans, bench presses, squats, deadlifts, and more.
  • The LUMBERJACK EZ curl bar places your arms in a more natural position for performing curls, promoting comfort and reducing injuries. This bar has a 25 mm grip, chrome sleeves, and brass bushings. Easily change the intensity of your lift and work your biceps from a variety of angles by alternating grips on the curl bar.
  • Both bars included in this offer feature a black manganese phosphate coating for unbeatable hardness and abrasion protection, medium-depth fine knurling, and sleeves secured with a no-maintenance snap-ring lock system, as compared to other Olympic bars with bolts which require constant adjusting.
  • All it takes to protect your investment is a couple of minutes and wiping down your Olympic barbells regularly with a light coat of a 3-in-1 oil. XMark, a trusted brand in strength training equipment, is found in schools, commercial gyms and home gyms across the United States. Long-lasting quality is what you can expect from XMark.
Check Stock

OTC 4244 Freightliner Rear Suspension Bushing Tool

  • OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock