Top Reduce Motor Reviews

iFlight 4pcs XING2 2306 1755KV 6S FPV Motor Unibell with 5mm Titanium Alloy Shaft for FPV Drone Part

  • - iFlight NEW series motor, new center slotted N52H curved arc magnets were introduced to drastically reduce the response time of the motor, flying more smooth, powerful, and stable..
  • - XING O-Ring Bearing can reduce the axial impact force just enough to keep your bearings smooth and quiet..
  • - High quality materials, 5mm titanium alloy shaft, strongest prop shaft ever..
  • - Motor wires protector, dynamically balanced..
Check Stock

iFlight 4pcs XING2 2306 2555KV 4S FPV Motor Unibell with 5mm Titanium Alloy Shaft for FPV Drone Part

  • - iFlight NEW series motor, new center slotted N52H curved arc magnets were introduced to drastically reduce the response time of the motor, flying more smooth, powerful, and stable..
  • - XING O-Ring Bearing can reduce the axial impact force just enough to keep your bearings smooth and quiet..
  • - High quality materials, 5mm titanium alloy shaft, strongest prop shaft ever..
  • - Motor wires protector, dynamically balanced..
Check Stock

Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'

  • Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
  • SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
  • SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Check Stock

Electric Skateboard Motor BLDC D6374 190KV 3350W Belt Brushless Motor Outrunner Sensored 15t Pulley Engine for DIY Electric Longboard,Off Road e-Skateboard,Scooter,esk8,ebike Part Accessories-GOESKBA

  • ...esign can deliver good performance and efficency also give maximum conversion of energy , high-end material make sure excellent heat dissipation and low energy consumption,professional design make sure electric skateboard starts smooth and low noise..
  • High-end Material Japanese Kawasaki silicon steel sheet iron core reduce the iron loss of the motor and improve the efficiency of the motor,420 material shaft more sturdy,good finishing on the whole outer body to enable motors dustproof,Japan NSK Bearings improve the service life of the motor、eliminate abnormal noise..
  • Professional Design double side arc-shaped convex magnets array can better match work with VESC FOC mode to greatly reduce the noise,hall plate fixed in the stator tightly,three M3 screws dispensing reinforced lock shaft prevent deviation,anti loose T-type motor shaft prevent slipping and loosening,multi-strand winding better dissipation and avoid skin effect..
  • Widely application GOESKBA Electric Skateboard Motor D6374 can be widely used in Electric skateboard,Longboard,Escooter,Ebike,battle robots,etc.
Check Stock

DBXMFZW 2.4G LCD Screen Remote Control Simulation UH60 Helicopter, Single Prop Aileronless RC Drone Aircraft with Gyroscope 2 Battery 6CH Dual Brushless Motor 3D&6G Simulation Fighter Model,

  • ☀Adopt aileronless design, dual-axis co-drive motor, electronic stabilization system, more accurate feel, more stable flight, and optimized structure to reduce the chance of damage. A 6-axis gyroscope is used. It has a stable, fast and precise flight attitude, especially suitable for beginners to fly..
  • ☀The propeller is designed with aerodynamic principles, providing strong power and self-stability of the body. It has high efficiency, power saving and long flight time. The blade is made of nylon + carbon fiber composite material, which has high strength, good toughness, impact resistance, no deformation and durable..
  • ☀Using high-precision CNC rotor head and swashplate to optimize the structure, reduce weight, and greatly reduce the probability of aircraft damage..
  • ☀Using 4006 630KV brushless motor for self-stable co-drive, reducing gear agitation, with low noise, large torque, sufficient power, and high efficiency. The lock tail motor uses a special 1104 4200KV brushless motor, which has the characteristics of high temperature resistance, fast response speed, stable lock tail, and not easy to be damaged after long-t....
Check Stock

Ventline V2270-50 Breeze 360 Exhaust Fan - Non-Lighted, 50 CFM

  • ...-scratch,automatic Closing Valve and Prevent Inhalation of Foreign Objects.
  • 【HIGH-QUALITY MOTOR】This Wall Ceiling Ventilation Fan is Adopts Double Ball Bearing Outer Rotor Brushless Motor to Ensure High Efficient, Quiet Operation and High-quality Performance. Compared with Ordinary Motors, the Upgraded Motor Can Reduce Friction Coefficient, Save Electricity Effectively and Enlarge the Service Life of the Machine.
  • 【OVERHEAT PROTECTION】Adopting an Axial Pipe Fan, Stronger Wind Design, Effectively Reduce Heat Generation, Can Realizes Optimal Cooling Effect.Built-in Overheating Protection Device Cuts off the Contacts when the Motor is Overheated, Which Plays a Role of Power Failure Protection.
  • 【8 INCH PARAMETERS】Dimension:25 x 15 x 20cm/9.8 x 5.9 x 7.9inch.
  • Air Flow: 735 CFM, Power:80W, Voltage: 110V, Frequency: 60Hz, Speed: 2800r/ min.
  • 【NOTE】Two Wiring Methods:1.Blue to Black (L),Brown to White (N ),Yellow to Green (E) 2.Blue to Black (L),Blue to White (N ),Yellow to Green (E), Without Screws,Without Plug.
Check Stock

Porter Cable 690/6902/6912 Router Replacement (2 Pack) Ball Bearing # 855284-2PK

  • 2-1/4 HP (maximum motor HP), 12.0 Amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoods.
  • Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque for enhanced control.
  • Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts vertically for a constant switch/cordset location.
  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Quick release motor latches for fast and easy motor pack removal for bit and base changes.
Check Stock

Engine Wire Loom Wiring Harness for GY6 125cc 150cc 250cc Scooter Quad Bike ATV Buggy Go Kart Dune

  • ... Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. Solenoid starter relay for chinese made 50cc also know as 50cc starter solenoid,50cc starter relay,50cc relay,50cc solenoid,150cc starter relay,150cc starter solenoid,150cc Relay..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

SURPASS HOBBY KK Series 3665 2300KV Waterproof Brushless Motor Shaft 5mm for 1/10 RC Car

  • This motor can support 3-4s lipo battery, more powerful and better faster..
  • Come with soldered 2mm banana plugs,save welding trouble..
  • Enchance anti off u ring for safety&stablility,active cooling fins greatly reduce motor temeratures..
  • Stainless steel motor shaft, CNC machined aluminum case, more powerful..
  • This 2205S 2300KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter..
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

RS2205 2300KV Brushless Motor CW/CCW 3-4S RC Motors for FPV Racing Drone FPV Multicopter

  • This motor can support 3-4s lipo battery, more powerful and better faster..
  • Come with soldered 2mm banana plugs,save welding trouble..
  • Enhanced anti off u ring for safety and stability. Active cooling fins greatly reduce motor temperatures..
  • Stainless steel motor shaft, CNC machined aluminum case, more powerful..
  • This 2205S 2300KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter..
Check Stock

The Prophecy Vol. 2

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock