Top Red Painted Magnet Reviews

Master Magnetics ZG30A-ABX Flexible Magnet Strip with Adhesive Back , 1/16\ Thick, 3/4\ Wide, 100 feet (1 Roll)

  • Magnet holds on one side only and is rated at up to 9 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Minimum recommended length for magnet is 1-1/3".
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16\ Thick, 1-1/2\ Wide, 50 feet (1 Roll)

  • Magnet holds on one side only and is rated at up to 19-1/2 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets.
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Master Magnetics PSM4-060-.25X100A-AMPBX High Energy Flexible Magnet Strip with Adhesive Back, 1/16\ Thick, 1/4\ Wide, 100' (1 Roll)

  • Magnet holds on one side only and is rated at up to 4-1/2 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Minimum recommended length for magnet is 2-5/8".
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Master Magnetics ZG60A-A10BX Flexible Magnet Strip with Adhesive Back, 1/16\ Thick, 1-1/2\ Wide, 10' (1 Roll)

  • Magnet holds on one side only and is rated at up to 19-1/2 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets.
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Pumpkin Patch Beaded Counted Cross Stitch Halloween Ornament Kit Mill Hill 2016 Autumn Harvest MH181622

  • Kit includes all Mill Hill Glass Beads, Mill Hill Painted Perforated Paper, magnets, floss and cross stitch graph needed to complete the stitched....
  • Pumpkin Patch makes two designs which can be whipstitched together for a back-to-back effect.
  • Mill Hill 2016 Autumn Harvest Collection: Bitsy Spider, Pumpkin Patch, Fall in Love, Patriotic Red, American Pie, Patriotic Blue.
  • Approximate Finished Size: 2.25 x 2.5 inches.
  • Use as a decoration ornament, a gift wrap enhancement, a brooch, a refrigerator magnet -- and many more!.
Check Stock

Eclipse Magnetics M2904ESKM Alnico Horseshoe Magnet, 1\ Length x 1-1/8\ Width x 5/16\ Thickness

  • Horseshoe magnet made from Alnico Grade 5 material, painted Red with a maximum temperature of 550 degrees C.
  • Length, width and thickness tolerances of +/-0.045".
  • Come keepered (non-magnetic metal plate) to reduce damage.
  • 1-inch length, 1-1/8-inch width, 5/16-inch thickness, 7/8-inch width across the poles and 1/4-inch gap between poles.
  • Eclipse Magnetics is at the forefront of development in magnetic materials and design. With over 100 years of experience, we have a proven track record of supplying quality products.
Check Stock

Puerto Vallarta Vacation Beach Surf Travel Tote Bag

  • This is a Colorful Hand Painted Resin Refrigerator Magnet.
  • This fridge magnet shows a gorgeous beach sunset with palm trees design which will look great on your refrigerator..
  • A super strong non-scratch magnet is located on the back and adheres to any metal surface.
Check Stock

Statue of Liberty 3-D Magnet Wood Base New York Souvenirs Fridge Magnets NY Magnet

  • Awesome 3-D magnet of the Statue of Liberty..
  • Magnet is hand painted, with a stained wood base.
  • Magnet is 4 3/4" tall by 2 1/2" wide by 1 1/4" deep.
Check Stock

Master Magnetics ZGN60APAADCR4X6X6 Flexible Magnet Squares with Adhesive Back, 1/16\ Thick, 1\ Wide, 1\ Length Scored on Sheet, 144-1\ x 1\ Pieces (Pack of 144)

  • 144 each 60 Mil thick, 1" by 1" pieces scored, cut almost completely through so that each piece is removed easily from 4" by 6" sheets. Includes 6 - 4" by 6" sheets with 24 magnets per sheet. Tolerance on 1" x 1" size is +/- 1/16".
  • Magnet holds on one side only and is rated at up to 1 pound perpendicular pull per 1"x 1" piece, or about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Minimum recommended length for magnet is 1".
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
Check Stock

R and R Imports Pismo Beach California Souvenir Hand Painted Resin Refrigerator Magnet Sunset and Green Turtle Design 3-Inch Approximately

  • This is a Colorful Hand Painted Resin Refrigerator Magnet.
  • This fridge magnet shows a gorgeous green turtle design which will look great on your refrigerator..
  • A super strong non-scratch magnet is located on the back and adheres to any metal surface.
Check Stock

Master Magnetics - B005HY9XFC Magnet Tape, One Side Adhesive Magnetic Tape, 1/16\ Thick x 1\ Wide x 10 Feet (1 roll), 07019

  • Magnet designed to hold on one side only directly to flat steel surface. Multiple Poles are evenly spread across its surface to prevent sliding. It does not hold well to other magnets..
  • Magnet holds up to 12 pounds per linear foot on contact with flat, smooth ferrous steel, without layer of material between magnet and steel. Minimum recommended length for magnet is 1".
  • Adhesive covered by peel-off liner is on non-magnetic side. Adhesive is pressure-activated, permanent, acrylic type with initial tack and minimum of 24 hour cure time requirement..
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description..
  • Magnet withstands temperatures from 0 - 150 degrees Fahrenheit. Made in USA..
Check Stock

Hand Painted White Black Cow Refrigerator Magnet

  • This Fun Cow Magnet Measures at 4 Inch in Length By 2 1/2 Inch In Height Features a Simple but Strong Magnet on the Back, and is Perfect for Lockers, Fridges, Dishwashers, or Whiteboards.
  • Excellent Gift for Anyone Looking to Bring a Bit of the Country into Their Home, and are Perfect For Gifting on Birthdays or Holidays.
  • Vivid hand-painted colors beneath a layered lacquer finish.
  • Constructed from a durable lightweight plastic composite.
Check Stock

Milidool Black Reborn Baby Dolls, Realistic Baby Dolls Lifelike, African American Real Life Baby Dolls Girl 22 inch with Teddy Bear Gift Set

  • ... a real baby in your arms. You’re sure to fall in love with your girl from the first moment you open the well-designed box. Press her arms gently to feel the skin yield beneath your fingertips..
  • Crafted with Care: Prepare to be blown away by this reborn baby’s realistic details. The lips and the fingernails were painted by hand, while the eyelashes were manually implanted. You’re sure to fall in love with every adorable detail..
  • 1 * Beautiful outfit, 1 * Magnet pacifier, 1 * Pink feeding bottle, 1 * Cozy diaper, 1 * Cuddly plush teddy with matching theme, 1 * Soft white blanket with red edging to keep baby snug and warm, 1 * Blank birth certificate, so you can name her as you wish..
  • Give the Gift of Joy: The life-like newborn doll will be a thoughtful present for your lovers and kids, a wise choice for nursery or mother-to-be, a special needs for Alzheimer, daycare centers, medical schools..
Check Stock