Top Red Lamp Harp Reviews

Canomo 2 Set 8 Inch Lamp Shade Harp Holder with Light Base and Ball Lamp Finial for Table and Floor Lamps (Bronze)

  • Package includes: 2 pack 8 inches bronze detachable lamp harp with ball lamp finial and saddle (harp holder). Notice: before purchasing, please make sure the size is right for your lamp.
  • This detachable lamp harp set can secures lampshade to standard table or floor lamps easily, the ball finial is easily screws on and off, saddle can be removed if wishing to keep your existing saddle.
  • Top of harp also accepts other standard 1/4-27 threaded finials. This lamp harp only fit for 1/8IP lamp.
  • Size: harp overtall is 20.3cm/ 8 inches, saddle hole diameter is 1cm/ 0.4inch, lamp finial is 1-1/2 inches high.
  • Good for modern lighting fixtures and contemporary home decor styling. Notice: before purchasing, please make sure the size is right for your lamp.
Check Stock

JJHXSM Lamp Shade Bracket 2PCS Antique Brass Lamp Shade Harp Holders with E26 UNO Light Base and Lamp Finial Lamp Shade Parts 10 Inch

  • The package includes: 2 sets of lamp harps, 2PCS lamp holders..
  • size: harp 9.5 inches high, base inner diameter is 1-7/16 inches (3.6 cm), total harp height: 10 inches = harp 9.5 inches + 0.5 inches adapter..
  • Dedicated to the E26 lamp holder converter, the detachable lamp harp, the lamp holder is 2 inches high, and the bulb holder equipped with the harp has a total height of 8 inches + 2 inches, so the height of the lampshade should be more than 10 inches..
  • Easy to install: This light harp is detachable and easy to install..
  • Note: This list is a 10-inch lamp harp. Do not forget to add the height of the lamp holder. The height of your lampshade should be greater than 12 inches.
  • please make sure your bulb base is E26 with collar (as shown in the picture)..
Check Stock

ManLee 8 Inch Lamp Harp Holder DIY Lighting Accessories E26 Light Base UNO Fitter Adapter Converter Finial Set Lamp Shade Bracket for Table and Floor Lamps Detachable Parts Chrome Polished

  • Easy to Install: Simply attach the saddle base to the lamp, then pinch the legs of lamp shade harp and tuck them into the grooves of saddle base. Super easy to connect adapter, harp and finish at the same time..
  • Durable Material: The lamp harp base is made of high-quality metal, and the surface adopts advanced plating process, which is durable and rustproof. Refined metal appearance, strong enough to hold the shade in place..
  • Upgrade Your Lamp: Well-made lamp cup harp is helpful to protect the bulb from breakage. Detachable lamp shade holders with U-shaped solid construction, contribute to add brightness of the lamp..
  • Wide Application: The detachable U shaped clip on lamp harp helps are helpful to table lamps and floor lamps. Easy match that pairs well with most lamps, suitable for homes, offices, restaurants, cafes, etc..
  • Package Include: One set of detachable harp lamp. The U-shaped harp lamp holder is 20.5 cm high, the base has an aperture of 3.8cm. Before buying, please carefully confirm that lamp bulb base is E26 with Collar Ring..
Check Stock

Royal Craft B&P Lamp 1 5/8\ X 8 1/4\ Clear Hurricane Shade

  • ALL-PURPOSE HARP- 7" 8" 9" 10“ 4 LEVELS' ADJUSTABLE- This lamp harp measures 7-10 inches in length and suit for lampshade 7"-10" tall. The frame bracket fits most parts of spider lamp shade without measuring the length of lamp shade.
  • SOLID AND STURDY -Both harp and finial are with heavy duty metal,sturdy for installation. The surface is treated with nice chrome looking finish,rust-proof and has longer lifespan.
  • COMPLETE LAMP HARP SET AND MORE- Detachable Pratical Spare Parts include an adjustable harp,two harp holder(saddle and E26 screw base uno fitter), finial and one spare part of heavy ball screw on top.
  • HEAVY BALL FINIAL INCLUDED- The kit include a spare ball nickel finial which improve the appearance of your lamp and meet your replacement use. Heavy metal and dismountable thread rod could be use as curtain rod finial.
  • EASY TO ADJUST AND WIDE APPLICATION which is quite helpful for the variety of lamp shades.Making an older lamp look new,using with old desk lamps,shades replacement etc..
Check Stock

lamp parts,7\ Lamp Shade Harp Holder and E26 Lamp Socket UNO Fitter Adapter Converter Finial Set, 7inch Tall 1-7/16\ I.D.,Detachable Parts 2pack (2, 7)

  • You can discretionary install which shade that you like with this harp uno set for your table lamp.
  • Dedicated to E26 lamp holder converter detachable lamp Harp,Bulb Socket tall 2 inches, Bulb Socket equipped with harp,total tall is 7inch+2inch, so use for lampshade tall exceeding 9inch..
  • 6.5inch (16.5cm) Tall,internal diameter 1-7/16 inch (3.6Cm),Tall:7inch=Harp 6.5inch+0.5inch Adapter.
  • The lamp harp and UNO set is suit for UNO and harp construction table lamps.
  • Easy installation: this lamp harp is detachable and easy to be installed.
Check Stock

lamp parts,11\ Lamp Harp Holder and E26 Lamp Socket UNO Fitter Adapter Converter Finial Set, 11inch Tall 1-7/16\ I.D.,Detachable Parts Polished Nickel (2, 11)

  • You can discretionary install which shade that you like with this harp uno set for your Floor and table lamp.
  • The lamp harp and UNO set is suit for UNO and harp construction floor and table lamps.
  • Dedicated to E26 lamp holder converter detachable lamp Harp,Bulb Socket tall 2 inches, Bulb Socket equipped with harp,total tall is 11inch+2inch, so use for lampshade tall exceeding 13inch..
  • 10.5inch (26.7cm) Tall,internal diameter 1-7/16 inch (3.6Cm),Tall:11inch=Harp 10.5inch+0.5inch Adapter.
  • Easy installation: this lamp harp is detachable and easy to be installed.
Check Stock

Lamp parts,8\ Lamp Harp ,lamp shade holder and E26 Lamp Socket UNO Fitter Adapter Converter Finial Set, 8 inch Tall 1-7/16\ I.D.,Polished Nickel Detachable Parts (2pack)

  • You can discretionary install which shade that you like with this harp uno set for your table lamp.
  • The lamp harp and UNO set is suit for UNO and harp construction table lamps.
  • Dedicated to E26 lamp holder converter detachable lamp Harp,Bulb Socket tall 2 inches, Bulb Socket equipped with harp,total tall is 8inch+2inch, so use for lampshade tall exceeding 10inch..
  • 7.5 inch (19cm) Tall,internal diameter 1-7/16 inch (3.6Cm),Tall:8 inch=Harp 7.5inch+0.5inch Adapter.
  • Easy installation: this lamp harp is detachable and easy to be installed.
Check Stock

ECUDIS Lamp Finial Cap Knob lamp Screw Top Lamp Decoration for Lamp Shade, Faceted Crystal Ball, Brushed Nickel Finish, 1-3/4' Tall Finial

  • 2 pack clear faceted crystal lamp finial with steel base in brushed nickel finish.
  • Lamp finials are 1-3/4" tall, 1 1/6" wide and are threaded 1/4-27 and fit a standard lamp harp.
  • Add a decorative flair to the top of a lamp, hold a lampshade in place and make your lamps look elegant.
  • Easy to install, screws onto the lamp harp after installing the lamp shade.
  • Lamp harp not included, can be used for standard lamp harp of table lamp, floor lamp, standing lamp, desk lamp etc.
Check Stock

8Inch Lamp Shade Harp, Heavy Duty Lamp Harp Adapter Polished Brass Plated Lamp Shade Parts, Lamp Shade Harp Holder with Light Base for Table and Floor Lamps, Detachable Parts 1-7/16\(36MM)

  • 【8inch Lamp Harp Holder】The lamp shade harp holder size: 8.1inch/20.5cm in height, internal diameter : 1-7/16 inch (3.6Cm), suitable for E26 lamp holder converter detachable lamp Harp.
  • 【Wide Application】The lamp shade holder replacement is equipped with the standard 3/8 UNO fitter adapter and can be widely used on table lamps and floor lamps in home, office, restaurant, coffee shop.
  • 【High Quality】The lamp shade holder replacement is made of metal with brass polished surface, rust resistance and wear resistance, durable and long lasting.
  • 【Heavy Duty Structure】8” lamp harp holder with the U-shaped solid construction, not easy to bend, can be tightly fixed the lampshade.
  • the lamp harp have a small metal cap on the each end to prevent the harp from slipping off the socket, effectively protecting the bulb from damage.
  • 【Easy to Install】Detachable lamp shade holders can be easily installed on the lamp holder to hold the lamp shade, and the shade holder is great for adding shine to the lamp or lighting.
Check Stock

Creative Hobbies 8 Inch Regular Weight Lamp Harp, Finial and Harp Base Set, Polished Nickel Finish

  • 8 inch light duty polished silver nickel plated lamp harp, harp holder and finial set.
  • Top of harp accepts standard 1/4-27 threaded finials and cap knob finial is included in this set..
  • Saddle Base Slips 1/8 IPS (3/8" diameter) lamp pipes.
  • Saddle can be removed if wishing to keep your existing saddleDescription8 inch light duty polished silver nickel plated lamp harp, harp holder and finial set. Top of harp accepts standard 1/4-27 threaded finials and cap knob finial is included in this set. Saddle Base Slips 1/8 IPS (3/8" diameter) lamp pipes. Saddle can be removed if wishing to keep your existing saddle..
Check Stock

Dysmio Lighting 12 Inch Heavy Duty Lamp Harp Fitter for Lamp Shades Polished Brass Finish Pack of 2

  • Use with table or floor light fixtures, Replace an existing harp, Use to create a custom lamp.
  • A quality solution for replacing a worn or broken lamp harp or for creating a new custom lamp, this lamp harp features a polished brash finish that complements most lamp styles. This two-piece harp is designed for ease of installation and adjustments and includes a threaded top that makes it suitable for attaching a decorative finial..
Check Stock

Lamp Making Kit with 8 9 10 Inch Lamp Harp, Lamp Socket Replacement and Rewire Kit for Repair Table and Floor Lamps, Lamp Parts for Do It Yourself (Black Finish)

  • Package includes - 1 x 8 9 10 inch adjustable lamp harp, 1 x clear crystal lamp finial, 1 x 8 feet lamp cord, 1 x 3-way lamp socket, 1 x lamp harp base, 1 x decorative neck, 1 x 5 cm threaded pipe, 1 x 2.5 cm threaded pipe, 2 x metallic washers, 2 x rubber washers, 2 x lock washers, 2 x hex nuts..
  • Adjustable and Works with Any lamp Style Harp. Not sure what size harp you need? Adjust the harp to the right size to get just the right look. Not to mention if you want to replace your shade again you wont need a new harp just another adjustment!.
  • Bubbles crystal lamp finial add a decorative flair to the top of a lamp, hold a lampshade in place and make your lamps look elegant. Lamp finial made of premium crystal, which is brighter and flashes when the light..
  • 8 feet UL listed - Electrical components are polarized and UL-listed, meaning you can rewire or repurpose old vintage or thrift store lamps to make them safer than they were before..
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts. [NOTE]: If there is any part of damage attachment, please contact us to get free replacement..
Check Stock

Dysmio Lighting 6 Inch Heavy Duty Lamp Harp Fitter for Lamp Shades Polished Brass Finish Pack of 2

  • A quality solution for replacing a worn or broken lamp harp or for creating a new custom lamp, this lamp harp features a rustic bronze finish that complements most lamp styles. This two-piece harp is designed for ease of installation and adjustments and includes a threaded top that makes it suitable for attaching a decorative finial..
Check Stock