Top Red Brass Shim Coil Reviews

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SN9 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.009″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.40mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.80mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

JAVIKA 0.005 x 6 x 100 inches Brass Shim Stock Roll Half Hard Cold Rolled CDA 260 Brass Alloy for Hardware and Machine Maintenance DIY Projects Jewelry Crafts Electrical

  • Brass Shim Stock Roll is made from a half hard, cold rolled, CDA 260 brass alloy with Low Friction and Good Corrosion Resistant..
  • Sieze: 0.005" Thickness x 6" Width x 100" Length. We have 4 thicknesses to meet your different needs..
  • The half-hard copper and zinc alloy material makes the shim rust-resistant for long-lasting performance..
  • Brass Sim Stock's softness and low melting point make it suitable in a broad range of applications, particularly in machinery. They are useful in creating accurate alignments, leveling surfaces, filling gaps, and more..
  • This product is Made in Taiwan, and has been tested for quality and reliability. Packing with a carton box..
Check Stock

Small Parts-17974 260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.20mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Bravex Chevy Hei Distributor Red Cap for Chevy GM SBC 283 305 307 327 350 400 BBC 454 396 427 Small Big Block 7500RPM

  • Made by TS16949 certified OE distributor manufacturer. 75,000 high voltage coil spark through 9,000 RPM, upgrade for racing application.
  • Full CNC machined aluminum body. Direct fit for GM application utilizing the 4-pin ignition module.
  • HEI Complete Distributor 283, 305, 307, 327, 350, and 400 small blocks, and 396, 427, and 454 big blocks. Red cap.
  • Standard size HEI. 65K high voltage coil, upgrade for racing application..
  • High output coil which produces 65,000 volt spark through 7,500 RPM. Brass terminals. less contacting resistance..
Check Stock

Du-Bro 370 2mm Tap And Drill Set

  • These high quality ball links feature burnished brass swivel balls for smooth operation.
  • Complete with socket head cap screw, brass shim and hex nut.
Check Stock