Top Rebar Cutter Bender Reviews

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

• Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
• Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
• Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
• Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
• Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

• 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
• 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
• Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
• Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

• 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
• 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
• Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
• Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....

Huanyu Electric Rebar Bender 900W Hydraulic Rebar Bending Machine 5/8Inch #5 16mm Rebar within 5s Bending Angle 0°-130° with Positioning Bolt Fast Easy Bending Rebar Steel Bar Steel Rod 110V RB-16

• 【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life..
• 【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender..
• 【Easy to Operate】One button operation. Keep the switch pressed and the bending block starts to push forward. Huanyu Steel Bender is equipped with an adjustable positioning bolt. You can mark on it to control the rebar bending angle. After the rebar is bent, pull the relief valve and piston returns to its original position..
• 【Humanized Design】Ergonomically designed rear handle and side handle (detachable) for comfortable grip and easy operation. Integral workbench base design. You can lay the bender on a flat surface to operate. Stable and effortless. Save your back!.
• 【Excellent Service】NOTE: We support customized service of 220V voltage to meet your needs.1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge....

Crescent H.K. Porter 3/8' (#3) and 1/2' (#4) Extendable Indexing Rebar Bender, RB4, Red/Black

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

• Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
• Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
• Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
• Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
• Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..

Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8', 1/2', 5/8') | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y

• MOTOR: 8-Amp motor with intense power (530W).
• TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed.
• APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees.
• FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency.
• PRESET DIAL: With the turn of a pre-set dial, bends can be made in a variety of angles.
• COMPACT: Extremely low profile design (18. 4" L x 8. 5" H x 9. 1" W), yet extremely stable.
• LIGHTWEIGHT: Only 42 Lb., makes it portable and maneuverability for ease of use on any jobsite.
• EASY TO READ MARKINGS: Reference markings on bending plate provide for easy position adjustment.
• METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.

Happybuy Hydraulic Rebar Cutter 1/4' - 7/8' / 4 mm - 22mm,Concrete Construction Tool 13Ton,Handheld Rebar Cutter G-22 w/Box,Steel Bolt Chain Cutting tool

• Pure Copper Coil Motor: This electric rebar cutter features a 900W pure copper coils motor to ensure higher reliability, which means excellent motivation yet low noise. The motor runs more smoothly to achieve the minimum friction and the minimum power consumption..
• Super-Fast Cutting Speed: The hydraulic rebar cutter can cut rebar within 2.5-3.0 seconds without sparks and sentiments, which can satisfy your various cutting demand. Cutting capacity ranges from 3/20" (4mm) #3 Min. Rebar to 5/8" (16mm) #5 Max. Rebar..
• High-quality Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed heads can offer quick and accurate cutting while providing double stability and sealability..
• Adjustable Bolt Design: This hydraulic cutter comes with an adjustable bolt-on to make it convenient when cutting rebar of various sizes. The rebar cutting machine we designed has low noise and a low failure rate, which is very helpful for work..
• Easy Storage & Widely Used: We provide you with a high-quality protective box for better storage. The compact body makes it effortless to carry anywhere. This electric rebar cutter is mainly used in constr....

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

• MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
• BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
• IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
• GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
• as to round steel and square steel, it can bend 0.394”..
• DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

• ...per, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
• 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
• Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
• Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
• 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..

Anbull 1500W Electric Rebar Bender,Hydraulic Rebar Bending Machine Bending up to 1 Inch #8 25mm Rebar with an Extra Set of 10-18mm #3 - #6 Rebar Bending Head, Rebar Bending Angle 90 Degrees or Greater

• Dual use head allows bending for both 3/8 Inch and 1/2 Inch rebar (No3 and No4).
• Pushbutton extends bender to 35 Inch for maximum leverage.
• collapses to just 21 Inch for convenient storage and portability.
• 14 position indexing head adjusts with center pushbutton to allow total access for maximum leverage.
• Extra sturdy steel handles for the toughest conditions.
• Super strong indexing head grips rebar securely for accurate bends.

Bonvoisin Tubing Bender Kit 3/8 -7/8 Ratchet Copper Pipe Bender Tool Set 90° Bend with 5 Dies for Refrigerator Air Conditioner Repair

• [Parameters] - Applicable pipe outer diameter: Φ10/12/16/19/22mm (3/8'', 1/2'', 5/8'', 3/4'', 7/8'').
• applicable pipe wall thickness: 0.6 ~ 2mm.
• [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
• [Compact & Portable] - The tube bender kit has a compact design, making it easy to work in tight spaces. Besides, with a storage case, it's convenient....
• [Complete Accessories] - This hvac tool set includes a pipe bender, a pipe cutter, a deburring knife, bending groove * 2 and dies * 5..
• [Wide Application] - This tubing bender is applicable for air conditioners, refrigerators, automobiles, heating, hydraulic and pneumatic systems, etc..

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

• Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
• This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
• The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
• The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
• Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....