Top Rebar Cold Forging Machine Reviews

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

PC Cooler C81H Slim CPU Cooler Turbo Blower Cooling Fan for 1U Server/HTPC Intel CPU Socket LGA1156 / LGA1155 by Tekit,4Pin PWM Turbo Fan Utral-Thin 29mm

  • The slim long life ball bearing fan. 10mm slim design, ball bearing, longer life(5000 hours)..
  • Cold Forging technology, efficient heat dissipation. Cold forging is a cold working process by which the original metal material is forging shaped by forging machine at normal temperature. Cold forging technology radiator, with the characteristics of large cooling area, high density and purity, etc.,the effect of heat disppation is better..
  • Product Dimensions: 90.5(L)x90.5(W)x29(H)mm Weight: 213g Rated Voltage: 12V DC Rated Current: (0.2 to 0.36) ±0.02Amp.
  • Air Flow: 18 to 27 CFM Fan Size: 7cm Noise Level: (28 to 50) dBA±10% Fan Speed: (3000 to 5000)RPM±10% Bearing Type: Two Ball Power Connector: 4-pin.
  • Support Intel Sockets: LGA1155/1156: Core i7, Core i5, Core i3, Celeron, Pentium.
Check Stock

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

  • Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
  • Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
  • Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
  • Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
  • Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..
Check Stock

Huanyu Electric Rebar Bender 900W Hydraulic Rebar Bending Machine 5/8Inch #5 16mm Rebar within 5s Bending Angle 0°-130° with Positioning Bolt Fast Easy Bending Rebar Steel Bar Steel Rod 110V RB-16

  • 【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life..
  • 【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender..
  • 【Easy to Operate】One button operation. Keep the switch pressed and the bending block starts to push forward. Huanyu Steel Bender is equipped with an adjustable positioning bolt. You can mark on it to control the rebar bending angle. After the rebar is bent, pull the relief valve and piston returns to its original position..
  • 【Humanized Design】Ergonomically designed rear handle and side handle (detachable) for comfortable grip and easy operation. Integral workbench base design. You can lay the bender on a flat surface to operate. Stable and effortless. Save your back!.
  • 【Excellent Service】NOTE: We support customized service of 220V voltage to meet your needs.1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge....
Check Stock

Happybuy Hydraulic Rebar Cutter 1/4' - 7/8' / 4 mm - 22mm,Concrete Construction Tool 13Ton,Handheld Rebar Cutter G-22 w/Box,Steel Bolt Chain Cutting tool

  • ...ing technology and strict quality control. And multiple screw fixed heads can offer quick and accurate cutting while providing double stability and sealability..
  • Adjustable Bolt Design: This hydraulic cutter comes with an adjustable bolt-on to make it convenient when cutting rebar of various sizes. The rebar cutting machine we designed has low noise and a low failure rate, which is very helpful for work..
  • Easy Storage & Widely Used: We provide you with a high-quality protective box for better storage. The compact body makes it effortless to carry anywhere. This electric rebar cutter is mainly used in construction sites, factory workshops, railway construction, bridge construction, building house, roads, etc..
Check Stock

MAHIONG 40 Pack Mushroom Rebar Caps, Fit for 3/8-1 Inch Rebar Stake, Versatile Plastic Rebar Safety Caps Covers, Orange

  • PREMIUM MATERIAL - Made of high-quality thickened pp materials, our rebar caps are sturdy, not easy to crack, come off or deform, wear-resistant and can be used for a long time without fading. The tabs on the inside flexible enough to fit different-sized rebar rods..
  • BRIGHT ORANGE - The rebar safety caps are in orange color that can easy to find and identify rebar sticking up that might not be seen against dark (dirt) background, and probably prevent people from tripping over protruding rebar, with deadly consequences..
  • EASY TO INSTALL - Our mushroom rebar caps are designed to fit atop the rebar, flexible enough a versatile cap for multiple sizes of rebar. Just screw them on the rebar simply by hand, and they will stick fairly well in place..
  • RICH PACK - The package comes with 40 pcs plastic rebar safety caps, fit for 3/8 -1 inch (10 - 25 mm) rebar stake, it is just what you needed to safely cover rebar sticking up out of the concrete. Great for construction sites and marking the end of the stakes in the garden..
  • SATISFACTORY REFUND POLICY - For this order, you can enjoy a worry-free refund within 30 days and 24/7 after-sales service. If you are still dissatisfied with rebar mushroom cap or have other questions, please feel free to contact us..
Check Stock

FAATCOI 60Pcs Rebar Caps, Plastic Mushroom Rebar Safety Cap Fits Rebar Stake Size #3-#7, 3/8 inch to 1inch,10M - 25M Surveying Markers, Concrete Stakes, Grading Marker, Surveyor Pins, and Spikes

  • ♥FITS MULTI REBAR SIZE: Come with 60pcs plastic mushroom rebar caps, and they are made to multi sizes of rebar, such as #3-#7, 10M - 25M steel bars, larger rebar may require hammer fit. It will meet your requirements well.
  • ♥HIGH-QUALITY MATERIAL: These rebar safety caps made of a solid piece of hard plastic, well made and friction, well-constructed and flexible enough underneath to fit different sized rebar rods, which makes them hard to be deformed or broken.
  • ♥ATTRACTIVE AND FUNCTIONAL: These mushroom-style safety caps treated with a brilliant orange finish for higher visibility, and mark the ends of exposed rebar, and blunt the rebar to help prevent injury or a falling worker from being impaled on the exposed rebar.
  • ♥WIDE RANGE OF APPLICATIONS: These plastic caps work great for your project to cover metal stakes and protect from protruding rebar at the construction site, it is also perfect for use as landscape and survey stake markers, concrete stakes, grading marker and more.
  • ♥BUY WITHOUT WORRIES: Every FAATCOI rebar caps offer 30 days money back and 100% satisfaction guaranteed. If you have any question with the products, please feel free to contact us by Amazon message..
Check Stock

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

MAKO 3” Rebar Support Chair with Flat Base (Pack of 500) – Fits Bar Sizes 3-5 – Heavy Duty & Durable Plastic Concrete Rebar Stand Holder with Snap-in Mount (color may vary)

  • SAVE TIME & LABOR COSTS with MAKO Rebar Chair. They support and stabilize the rebar mats and allow for quick rebar grid setup time, thanks to their easy-to-use snap-lock design. Your reinforced gridwork will be placed more quickly and efficiently. We use recycled plastic to mold the rebar chairs so the color of the chair may vary..
  • VALUE PACK OF 500: The concrete rebar chairs are available in a bulk pack of 500 pieces, making them a premium yet value for money addition to your construction project. They provide stability, are easy to install and get the job done..
  • SECURE & CONVENIENT DESIGN: Our rod chair rebar features a wide, flat base that provides a stable surface and prevents them from tipping off during pouring. Plus, the rod securely snaps into the chair, which eliminates the need for tying and saves a lot of your time..
  • WIDE APPLICATION: Our durable rebar support chairs can be used for at grade or precast applications to support #3 through #5 rebar or post-tension cable. Non-conductive construction makes them ideal to use in bridge decks and power plant projects..
  • HEAVY-DUTY CONSTRUCTION: Our concrete rebar chairs are made of durable and heavy-duty polypropylene, so they are guaranteed to never rust, break, snag or crack. The rebar chairs are non....
Check Stock

MYCS Mushroom Rebar Cap (25 Pack) - Rebar Size: #3-#7, 10M - 25M

  • ✅USA's #1 Premium Concrete & Rebar Manufacturer, Distributor & Supplier.
  • ✅Rebar Mushroom Cap - Orange plastic caps to prevent abrasion and small injuries, from protruding steel rebar pieces.
  • ✅Construction Safety Rebar End Cap - For Workplace Protection NOT for Impalement Protection.
Check Stock

KEILEOHO 100 PCS Rebar Safety Caps,Yellow Plastic Mushroom Rebar Cap End Identification Bar Mushroom Building Construction Site Supplies Rebar Size: #3-#7, 10M - 25M

  • 100PCS MUSHROOM REBAR CAP - Widely used safety product that is used inside the construction industry to cover exposed rebar poles to prevent injuries..
  • REBAR SAFETY CAPS - Easily fits over exposed rebar poles to prevent rebar wear and damage..
  • YELLOW MUSHROOM CAPS - Yellow is a prominent color with high visibility..
  • HIGH QUALITY & WIDE APPLICABILITY - Made from durable plastic, Durable and suitable for construction sites. The rebar caps suitable for size:#3-#7, 10M - 25M steel bars..
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our Rebar Safety Caps, you can return the product and get a refund within 30 days from receiving. Just remember that your satisfaction is our first priority..
Check Stock

MAKO 1.5” Rebar Support Chair with Flat Base (Pack of 800) – Fits Bar Sizes 3-5 – Heavy Duty & Durable Plastic Concrete Rebar Stand Holder with Snap-in Mount

  • SAVE TIME & LABOR COSTS with MAKO Rebar Chair. They support and stabilize the rebar mats and allow for quick rebar grid setup time, thanks to their easy-to-use snap-lock design. Your reinforced gridwork will be placed more quickly and efficiently..
  • VALUE PACK OF 500: The concrete rebar chairs are available in a bulk pack of 500 pieces, making them a premium yet value for money addition to your construction project. They provide stability, are easy to install and get the job done..
  • SECURE & CONVENIENT DESIGN: Our rod chair rebar features a wide, flat base that provides a stable surface and prevents them from tipping off during pouring. Plus, the rod securely snaps into the chair, which eliminates the need for tying and saves a lot of your time. The rebar chairs are made from recycled plastic and color may vary..
  • WIDE APPLICATION: Our durable rebar support chairs can be used for at grade or precast applications to support #3 through #6 rebar or post-tension cable. Non-conductive construction makes them ideal to use in bridge decks and power plant projects..
Check Stock