Top Rear Axle Shaft Reviews

WADEKING WHW Bike Pegs 4.3\ Length,Suitable for 14mm Axles, Freestyle BMX Bicycles,Durable and Stylish Non-Slip (Black 1)

  • Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage..
  • Dimensions: 110mm * 35mm (4.33in * 1.37in),Suitable for 14mm axles.first, measure whether the axle size data of your bicycle is consistent..
  • Installation method:Mounted on the rear axle of the bicycle to ensure that the shaft is longer than 0.5 cm. If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure..
  • Function: Suitable for front and rear axles, Convenient tool for picking up another person by bicycle, Support your feet..
  • Material: Made of high quality aluminum alloy, high strength & wear resistant.
Check Stock

NICHE Front and Rear Left and Right High Strength CV Axle Kit for 2003-2008 Yamaha Grizzly 660 5KM-2510F-11-00

  • Includes Front Left Axle, Front Right Axle, Rear Left Axle, Rear Right Axle.
  • Compatible with the 2003-2008 Yamaha Grizzly 660.
  • 25% Larger Joint and Shaft Diameters When Compared to Factory Specifications.
  • Durable Neoprene Boots Ultra-Low-Profile Boot Clamps Prevent Moisture or Water Damage.
Check Stock

Bicycle Quick Release Hollow Axle, Solid Axle, Hub Front and Rear Quick Release Lever, Center Axle, Front and Rear Axle, 1 Set

  • The length of the front hollow shaft is 108mm (the front road and mountain are common, the same).
  • Rear hollow axle road bike: 140mm Mountain bike: 145mm, hollow axle diameter 9.5mm.
  • Product includes: front axle kit*1pcs+rear axle kit*1pcs.
  • Full range of bicycle accessories, riding equipment and bicycle accessories.
Check Stock

GPM for Traxxas Slash 4X4 / Slash 4X4 LCG / Slash 2WD F-150 / Stampede 4X4 VXL Upgrade Parts Stainless Steel 304 + Aluminum Rear CVD Drive Shaft with Steel Wheel Hex - 1Pr Set Red

  • Product Name : Stainless Steel 304 + Aluminum Rear CVD Drive Shaft With Steel Wheel Hex - 1Pr Set.
  • Axle joints are made with stainless steel 304, more sturdy and not easy to rust. Special design on the axle joint, the joints are protected and wrapped inside the axle. Aluminum shaft body made from alloy 6061T6 material which is light weight with high tensile strength. The drive shaft is desgined slightly thicker than the original for longer durability. Silicon O-rings are inserted at the axle joint to minimize the impact on the CVD when landing on ground..
  • Accessories included : 3mm Steel Hex Shim-2pcs.
  • Original stock part number : 6828X + 6850X + 6853X..
  • Will fit : Traxxas 1/10 Slash 4X4, Slash 4X4 LCG (68086-21), Slash 2WD Ford F150 Raptor, Stampede 4X4 VXL.
Check Stock

SMALL STAR Bike Pegs 2Pcs Aluminum Alloy Anti-Skid Lead Foot Bicycle Pegs 3/8 inch Axles

  • Lightweight,3/8 axle x 26T , Fit 3/8 inch axles..
  • High quality,Made of high-strength aluminum alloy material, strongly-built and heavy weight-bearing..
  • Bicycle Pegs,Compact bicycle foot pegs Knurled pegs, anti-skid.suitable for front and rear axles. Convenient tool for picking up another person by bicycle..
  • Easy to use,Mounted on the rear axle of the bicycle,Install the shaft screws to leak at least 6mm,Or directly remove the shaft nut the longer the screw leaks , the safer theinstallation and use..
  • Suit for universal Bike,road bike, mountain bikes, MTB, BMX, etc..
Check Stock

1/10 Rock Crawler Axle Front and Rear Portal Axles Complete Metal Alloy for Axial SCX10 Honcho Model Crawler Car

  • Suitable for: RC Car Front Rear axle fit for 1/10 Axial SCX10 RC Model Crawler Car. SCX10 crawler car built for extreme off-road capability that takes you to new places and new adventures..
  • Front crawler axial high pinion gears for added ground clearance and better driveshaft angles.Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain..
  • Aluminum alloy material: Axial scx10 portal axles, Aluminum alloy shell CNC, internal steel gear and drive shaft, Professional manufacture, excellent properties, high reliability. Alloy Front & Rear Axle Assembly Parts Lightweight, durable. Directly replace Original plastic axles, Made your car more attractive and cooler..
  • Easy to install: 1/10 rc portal axles the total length is 213mm/8.39in, and other installation accessories are attached, Aluminum Alloy Axle Front and Rear Axle easy to install, perfect fit, make your remote controlled car cool and attractive. Lightweight upgrade enhances car's performance in handling and durability, providing unmatched driving versatility..
  • Note: Axial SCX10 Axle may loose gears during transportation. It can be used normally with only slight adjustments. If you encounter such problems, please feel free to contact us..
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

Kool Stop BMX Threaded Brake Shoe, Black

  • Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage..
  • Dimensions: 110mm * 38mm (4.33in * 1.5in) thickness 3mm (0.12in). Suitable for 3/8 inch shaft x 26T front and rear axles.First, measure whether the axle size data of your bicycle is consistent..
  • Specification：Suitable for both front and back wheel axles of bicycle.But it does not meet the thread diameter of 14mm or more..
  • Installation method: If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure..
  • Function: Ordinary bicycle, which allows you to sit on the bicycle and support your feet. BMX/mountain bikes are not suitable for standing for a long time, and more are to protect the shifting gear from scratching..
Check Stock

Huskey Parts Company Spline/Rear Axle Shaft Driver/Passenger Side Fits EZGO Electric RXV Golf Cart 2008-Up

  • Replacement rear driver and Passenger side axle Shaft for EZ-GO Electric RXV.
  • Driver Side Axle Measures: 24 3/4" L, Replaces OEM Number(s): 620337,614208.
  • Passenger Side Axle Measures: 16-1/4, Replaces OEM Number(s): 620337.
  • Fits: E-Z-GO Electric 2008 to current RXV model.
Check Stock

Alomejor RC Car Axle Rear Front Portal Axle W/Steering Link Transmission Shaft Compatible with Axial SCX10 II 90046 90047 Titanium

  • ?IMPROVE DURABLILITY?Modified for heightened and widened front and rear drive shafts, which is better than ordinary axles, and the axle is higher. The....
  • ?HIGH QUALITY?The aluminum alloy shell, hardened steel structure gears and drive shaft increase durability, and improve service life..
  • ?INCREASE SPACING?The portal axles create extreme amounts of ground clearance under the center of its axle center, increasing the spacing by about....
  • ?SIMPLE INSTALLATION?Easy to install, perfect fit, make your remote control car cooler and more attractive..
Check Stock

WPHMOTO Rear Axle Assembly Complete Wheel Hub Kit and 6 Wheel Tires With Rim & Brake Assembly & T8F Chain for Go Kart Quad Trike Drift Bikes

  • This is a high class and durable live axle kit has almost all the rear-end parts you need, perfect for DIY rebuild go kart quad, trikes or drift bikes.
  • The Axle fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space.
  • Shaft overall length: 740mm (29 1/8 inch), the thickest part of the shaft is 22mm(7/8").
  • Tubeless wheel spec: 14 1/8" Tall & 5 1/4" wide, with 145/70-6 tire, 6" rim.
  • Package includes: (1) Axle Assembly, (2) Wheels (with tire, rim, tube), (1) T8F Chian, (1) Brake Master Cylinder Caliper Assembly, (1) Sprocket, (1)....
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

OEM Twinloc Suspension MTB 29 Carbon Mountain Bike Frame 29er MTB Suspenion Frame 27.5er Plus Boost Suspension Frame (Mixed Color Glossy, 29er 17.5'')

  • Color: mixed color, glossy (color can be changed), Size: 15.5/17.5/19/21inch*29er, 15.5/17.5/19/21inch*27.5er plus.
  • Suitable speed: 10s 11s 12s , Wheel size : 29er*2.35 and 27.5er plus*3.0 tire.
  • frame travel:100mm，Brak:Disc brake，Rear shock CC : 165*38mm.
  • Suitable crankset :32T-38T, Bottom bracket : BB92, Rear axle : 29er is 142*12mm, 27.5er plus is 148*12mm.
  • Including: frame, headset, clamp,BB92,thru axle shaft, rear hangers.
Check Stock