TISINO XLR to RCA Y-Cable, XLR Female to Dual RCA Adapter Y-Splitter Duplicator Lead Unbalanced Stereo Audio Interconnect Cable -10 feet/3 Meters
XLR Female to Dual RCA/Phono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the RCA inputs on a separate device, it splits a mono XLR signal into two separate mono RCA lines. (Note: Not left and right channels).
Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR PINs 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. This is an adapter to let you use an XLR mic/ component on your RCA circuit..
High-quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion-resistant, 20 AWG 4N oxygen-free copper wire combined with double shielding for best audio quality, excellent signal quality..
Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response..
The XLR connector is a high-quality metal shielded type with positive locking into the microphone.
It splits closer to the RCA ends, the distance to the split point is about 20 inches/ 50cm..
2-Channel Bluetooth Amplifier and Pair of 5' Waterproof Speakers
Bluetooth streaming audio (A2DP) and control (AVRCP), Front USB with MP3/WMA playback, Front HDMI input for pass through to HDMI output, HDMI Input Pass Through Rear HDMI Output.
HDMI pass thru (plays HDMI audio input over speaker and low level outputs), Digital AM/FM Tuner/30 Preset stations (12 AM/18 FM), 2 Zones / 4 Speakers Output.
Rear AUX A/V input (RCA jacks), Rear AUX Audio Output (RCA), Subwoofer Audio Output (RCA), Mono subwoofer line level audio output (rear RCA jack).
Electronic Bass, Treble, Balance and Fader Controls. White dimmable LED backlit controls, Stereo line level audio output zone A (rear RCA jacks), 24 Watts maximum, Clock with alarm and sleep timer.
Mounting Dimensions: 96.8mm (W) x 73.8mm (D) x 99.9mm (H). 20-PIN Speaker Wire Harness, Installation Hardware and Wireless Remote Control Included.
OUOU VGA to RCA Cable〔2 Pack 〕VGA Male to S-Video 3 RCA Jack Female Composite AV TV Out Adapter Converter Video Cable for TV PC Computer AV Projector
What You Get:2x VGA to RCA cable [Length: 7 in / 17 cm] 18-month warranty and friendly customer service.Please check your video cards documentation....
Note: Does not covert composite to VGA.Please make sure the Video Card of your system supports TV (RCA / S-Video) output through VGA Port. If not, a....
VGA TO RCA: Designed for transmitting the VGA signal (Output) to S-Video or Composite Video signal (Input). This adapter will not convert S-Video or....
Connectivity: D-Sub high density 15 pin to S-Video mini din 4 pin female and RCA jack..
View and Share your photos, videos, presentations and more on a larger CRT television with this Plug and Play cable | Please note cable is one....
3.5mm to 3 RCA Audio Video Cable, Riksoin 6.6FT/2M 3.5mm to 3-Male RCA Adapter Stereo AUX Cord AV Cable for MP3, Camcorders, Tablet, Speaker, Home Theater, DVD Player & More (Grey)
This 3.5mm to 3 RCA male to male cable can help to transmit video signal from 3.5mm jack to 3 RCA devices. It fits most of camcorders that require a 3.5mm cable to connect it to your television or other 3 RCA-enabled devices. Yellow is for video signal, white is for Left audio, red is for Right audio..
The AUX to 3RCA audio video cable is compatible for video or audio equipment with 3.5mm/RCA type jacks. The 4 pole 3.5mm jack can connect to portable audio devices such as camcorder, DV, DVR, TV Box, projector. The 3 RCA will fit TVs/monitors, DVD player / recorder, VCR, TV, Hi-Fi Stereo, Receiver..
24k gold plated connectors, protect the cables from corrosion and solid RCA connectors. Ensure high quality audio and video output. Durable and flexible Nylon Braided Jacket, Wear-resistant and more stronger for daily use..
The environmentally friendly nylon braided cable material is more flexible, it can be used for a long time. High-quality pure copper core, provides ultra-high-speed data transmission and sharp and clear video signal. Color marked connectors help you install it easily..
Package included 1x 3.5mm to 3 RCA male to male Video Cable. ★★★★★The pin-out is standard Left channel-Right channel-Ground-Video (GROUND on Ring 2). If you need the....
Cable Matters Dual RCA to XLR Unbalanced Interconnect Cable 10 ft, 2 RCA to XLR Male Cable (Dual XLR to RCA Cable) - 10 Feet
...converter with oxygen-free copper (OFC) conductors and braided shielding provides maximum cancellation of hum and noise of an unbalanced audio signal.
A lifetime warranty is included with this Shielded XLR cable for peace of mind when purchasing.
Robust construction of this XLR to RCA adapter includes a flexible PVC jacket with gold-plated connectors.
Shielded XLR male connectors have molded strain relief to support the weight of the cable.
RCA connectors have easy-grip treads with a split blade housing for a secure connection.
XLR female input compatible with a subwoofer with XLR input such as the Mackie Subwoofer.
XLR to RCA adaptor connects to an audio mixer such as the Behringer Mixer.
Instantly connect a DJ Controller with an RCA phono jack to speakers with XLR input with this RCA to XLR adapter.
Epson Home Cinema 5025UB 1080p 3D 3LCD Home Theater Projector
Screen Size Range: 82-inches from 8 feet.
Lamp Life: Up to 5,000 hours (ECO mode) and up to 4000 hours (Normal mode).
Connectivity: HDMI x 2, RCA (component) x 3, RCA (composite) x 1, VGA D-sub 15 pin (computer input) x 1, Serial: RS-232c x 1, Trigger On/Off x 1 (3.5 mm stereo jack), 12 VDC 200 mA (max.).
InnoMaker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. (DAC HAT)
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits..
Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode..
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor..
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals..
Comes with software, document and friendly technology support. For more information, please refer to our wiki(view the link on color page comes with the goods)..
Seismic Audio - Tower1 - Powered Portable Column Array PA System - 4x3 Column Speaker & 10 Inch Subwoofer
Model: Tower1 | Powered Portable Column Array PA System | 10 Inch Subwoofer with 4x3 Inch Column Array Speaker | Built-In Mixer and Bluetooth.
Active 10" Sub Cabinet | Class D Power Amplifier | Column Speaker houses four 3 inch Speakers | System Power 450W | Power Rating: (RMS/Peak) SUB:150W/300W: TOP:80W/160W | Wireless Connectivity: Bluetooth Technology Built in (Stereo Wireless).
Features: MP3 Player | Bluetooth 4.0 Stereo | Effects Delay | Cooling Convection | Protection: Short Circuit, Over-Current, Limiter, Over temp, Soft start | Indicators: Power, Signal, Limiter.
Construction: Cabinet Material ABS | Powdered Coating | Dimensions: Subwoofer: 24" x 22.5" x 23.25" | Weight: 48.5 lbs | Designed for Easy Set Up and Tear Down.
ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant
The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3,RoHS Compliant.
The chip is Atmega+2560-16au and 16u2, same with the official version..
Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Digital Input HDMI x 1 (HDCP compliant Computer Input 1 15-pin mini D-sub x Computer Input 2 15-pin mini D-sub x Computer Monitor Output 15-pin mini....
Video Input S-Video Mini DIN 4-pin x 1, Composite Video RCA jack x 1, Component Video 15-pin D-sub x 2 (shared with computer in 1/2Audio Input 3.5 mm....