Top Rc Micro Servo Reviews

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
Stall Torque (4.8V): 17.5oz /in (1kg/cm).

Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..

Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.

Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..

Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

Check Stock

Thunder Tiger RC Rudder Servo Gear Set Innovator

☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.

Check Stock

DWEII MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Pack of 3

Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Recommended voltage: 5V, current usage: 3A.
Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
Dimension:40.7*19.7*42.9mm(1.6*0.78*1.69in).
This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
Compatible with most standard receiver connector.

Check Stock

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

Micro Servo Motor for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots . Created from the Highest Quality Parts Available and Put Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..

Check Stock

4 Pack MG996R Metal Gear Torque Digital Servo with Arm Horn, MELIFE MG996 Robot Servo Motor for FUTABA Hitec Sanwa GWS JR RC Helicopter Car Boat Robot

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

Check Stock

Que-T Brass Steering Servo Horn Arms 3.1/4.1/5.1mm for RC Car Boat Rudder Parts (Brass, 4.1mm)

Suitable--The servo arm is suitable for EMAX ES08MA II/ES08MD II Servo (For Axial SCX24 Crawler)..
High Quality--Our rc servo arm is made of aluminum alloy material, not easy to corrode, construct for precision and durability..
High Precision--CNC machining makes it precise in size and stable in performance..
RC Servo Bracket--This servo arm comes with a servo bracket, which is made of high quality aluminum, anodized and durable..
What You can Get--A rc servo arm with some screws, easy to install, and a rc servo bracket..

Check Stock

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

[Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
[Interface type] This SG90 servo is compatible with JR & Futaba interface.
[Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
[Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.

Check Stock

10PCS ShareGoo 25T Aluminum Servo Horns Arms M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Red

Suitable for MOSTLY 25T Standard Servo Motor.For example,Compatible with Towerpro,HSP,HD power,Futaba, Axial ,Savox,Xcore,Standard Servos Motors, MG995 MG996R MG946R ,S3003 etc servo.
Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
Hard aluminum construction for precision and durability..
For RC Scale Type: for RC buggy, rc car, rc truck, rc truggy.
Better than most of the plastic material,Pack of 10.

Check Stock