HiLetgo GPIO Expansion Board Raspberry Pi Shield for Raspberry PI 4B/3B+ With Screws
- Raspberry Pi 4B/3B+ GPIO Shield Expansion Board.
- Multifunction GPIO Extension Board 1 to 3 Port DIY.
Top Raspberry Gpio Breakouts Reviews
risingsaplings rpi gpio io Expansion Extension Module Board for Raspberry Pi 3 2 Pi Model B+ 4 Zero
- This GPIO extension board is compatible with Raspberry Pi 3, Pi 2, Model B / B+, ZERO and ZERO-W. (For ZERO you need to soldered a 2x20pin header in your Raspberry Pi ZERO).
- GPIO 1 to 3: 1 row GPIO ports could expanded into 3 rows GPIO ports..
- All pins are marked with function names..
- Come with 4pcs double-screw bolt, 8pcs Screws..
Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B
- ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
- ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
- ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
- ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
- ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display
- Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard
- Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
- Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
- 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
- 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
- Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
sb components Raspberry Pi Pico GPIO Expansion Board, Multi-Purpose GPIO Expansion for Raspberry Pi Pico
- Raspberry Pi Pico GPIO Expansion Board is used to break out all the pins and power of the Raspberry Pi Pico development board via male or female headers.
- Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire.
- It has been designed to enhance the learning experience for the user.
- GPIO Expansion Board is specifically made to work with the Raspberry Pi Pico Board.
- Compatible with all the variants of Sensors/Modules.
GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
- GPIO status LED and power 5V / 3.3V indication..
- GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
- Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
- Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
- Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
5Pcs GPIO Ribbon Cable for Raspberry Pi Male to Female 40pin Breadboard Jumper Wire Computer Accessories 20cm(Male to Female)
- The GPIO cable can be connected to a 3.5 inch display for easily use.
- Professional designed for Raspberry Pi male to female GPIO cable.
- Possess 20cm length and 40pin in total, enough to meet your demands.
- This cable wire can be used to extend the GPIO of for Raspberry Pi.
- GPIO wire can be connected to T board, breadboard and other operations.
WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire
- 【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
- 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
- 【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
- Material: High-quantity copper soft wire material for safe and durable.
- Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
- 【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
- 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
- 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
- these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....
GeeekPi Raspberry Pi Zero 2 W Case/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink, 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Black)
- Compatible with Raspberry Pi Zero/Zero 2 and Raspberry Pi Zero W/Zero W 2 (Raspberry Pi Zero Board is Not Included).
- Case with Power Supply, refer to ASIN B09Q5CHCGX.
- The heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports..
- Acrylic case with 2 covers and screws to install..
- Access to all ports of Raspberry Pi Zero Board..
- Package includes a case, heatsink, switch cable, OTG cable, HDMI adapter, GPIO header, and a screwdriver..
SamIdea 2-Pack 40pin Male to Female IDC GPIO Rainbow Ribbon Cable Jumper Wire for Raspberry Pi A+/B+/3 B, 20cm/8'
- 8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
- Pin Pitch: 2.54 mm,Their Diagram as Product image show.
- 2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
- GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
- SamIdea is a Registered Trademark, can not sold without authorization..
REXQualis RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
- The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
- GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
Treedix Compatible with Raspberry Pi 3B/3B+/4B GPIO Breakout Expansion T-Type Board with 20cm FC40 40pin Cable Development Board
- The small board is connected to the 40-pin GPIO connector on the Raspberry Pi, and these pins are assigned to a breadboard-friendly layout and spacing.
- T-shaped expansion board and breadboard make the experiment more convenient.
- Using the GPIO expansion board, you can connect all versions of the Raspberry Pi to various sensors and electronic components.
- Purpose: It can be used for the pin experiment of the experiment board, adding experimental items, etc., and it can be connected to the pin very reliably by simple soldering by yourself. 5. Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
- Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.