Top Rapid Prototype Mold Reviews

Soft Plastiс Mold Lure Making Injection Molds Fishing Lures C138

  • MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • LUBRICATION: Recommended. For best results use silicone grease..
  • DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
  • Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..
Check Stock

Tilex Mold and Mildew Remover Spray, 16 Fluid Ounce (Pack of 4)

  • MOLD ARMOR Rapid Clean Remediation kills, cleans, and prevents mold and mildew with visible results in 1 minute..
  • MOLD ARMOR Rapid Clean Remediation is a proven one-step house disinfectant, sanitizer, fungicide, mildewstat* (effective against Aspergillus niger*), and virucide**..
  • This mold and mildew inhibitor has a non-abrasive formula effective on hard non-porous surfaces..
  • Kills 99.9% of bacteria and viruses, including Influenza A H1N1**, Respiratory Syncytial Virus**, and Human Coronavirus**)..
  • To use as a sanitizer, disinfectant, mold and mildew remover, pre-clean heavily soiled surfaces and then spray the surface until wet. Wait time varies according to intended results. Rinse or wipe away – no scrubbing required..
Check Stock

Smedioks Premium Soft Plastiс Mold Lure Making Injection Molds Fishing Lures 3 Cavity Yama Senko 5''

  • MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • LUBRICATION: Recommended. For best results use silicone grease..
  • DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
  • Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..
Check Stock

COMP Cams 4800-1 Raised 1 Piece Guide Plate for Chevrolet Small Block w/ 5/16\ Pushrod 7/16\ Stud

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits Chevrolet 265-400 Small Block engines with 7/16" studs and 5/16" pushrods.
Check Stock

Alumilite AlumiRes RC-3 Urethane Casting Resin Black [1 gal A + 1 gal B 2 gallons Two-Part Kit] Great for Small Large Durable Pieces such as Rock Climbing Holds Medical Parts Architecture Molds

  • CREATE YOUR ONE-OF-A-KIND MOLDS: Can't find the perfect premade mold with the stiffness and stability you need? Why not make your own instead! With....
  • PERFECT FOR INTRICATE PROJECTS: With our platinum-based silicone mold maker you can create a highly detailed, exact replica of anything you ever want!....
  • FDA COMPLIANT FOR CULINARY USE: Planning to create food-grade molds for your home baking business? With our silicone rubber compound, you can now make....
  • GREAT FOR 1 OR 2-PIECE MOLDS: Can’t seem to find the casting resin mold you need? Our Plat 55 two-part kit makes it easy to create your own one or....
  • WIDE RANGE OF APPLICATIONS: You can use our moldable compound for a variety of fun craft projects. It's ideal for making prototype designs and....
Check Stock

COMP Cams 4840-1 Flat 1 Piece Guide Plate for GM LS3 w/ 5/16\ Pushrod and 8mm Stud

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits GM LS3/L92 engines with 8mm studs and 5/16" pushrods.
Check Stock

COMP Cams 4839-1 Flat 2 Piece Adjustable Guide Plate for SBC/289-351W w/ 3/8\ Pushrod 7/16\ Stud

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits Chevrolet 265-400 Small Block and Ford 289-351W engines with 7/16" studs and 3/8" pushrods.
Check Stock

Comp Cams\4825-8 Flat 1 Piece Guide Plate Set for Dodge Magnum V8 w/ 5/16\\\ Pushrod and 5/16\\\ Stud\

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits Dodge Magnum V8 engines with 5/16" studs and 5/16" pushrods.
Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

DOOMSDAY DISCS Famine 2-Pack Distance Driver | Prototype Runs for Disc Golf Collectors and Players

  • Early Prototype Runs of the Famine Distance Driver.
  • Two Discs for One Low Price (Alpha Prototype in Flexible Silver and Beta Prototype in Firm Yellow).
  • Understable Distance Driver for Easy Distance and Less Fade.
  • Collectible Discs from Before PDGA Approval - May Have Rim Flaws in Prototype Runs.
Check Stock

13 FISHING Prototype TX 2.0 5.2:1 Gear Ratio Saltwater Inshore Spinning Fishing Reel

  • CASTABLE & DURABLE SPINNING REEL - The 13 Fishing Prototype TX is a light spinning reel aimed at giving Gulf Coast inshore saltwater anglers premium spinning reel performance for light line fishing..
  • UNINTERRUPTED ROTATION - Boasting a superior 12-pin Japanese anti-reverse system and a 4D forged drive gear, the 13 Fishing Prototype TX Spinning Reels provides uninterrupted rotation that you can feel with each revolution of the handle..
  • SMOOTH PERFORMANCE - Encased in an old school metal body cover, the 13 Fishing Prototype TX Spinning Reels offer a high line capacity and a smooth FREAK drag system for easy-to-apply drag pressure and smooth drag engagement..
  • SEAMLESS OPERATION - Engineered with a focus on seamless operation and dependability, the 13 Fishing Prototype TX Spinning Reel?s Glide Oscillations system and titanium coated bail ensures trouble-free performance cast after cast..
  • AIRFOlL CARBON BODY - A rigid Airfoil Carbon frame is protected by proprietary n.e.r.d. repellent coating that is resistant to saltwater..
Check Stock

FTCBlock Protoshield V3 Prototype Expansion mega Shield Bread Board for Arduino Mega2560/1280 UNO

  • Latest uno proto shield prototype expansion board with 170 ties mini breadboard..
  • 170 ties mini breadboard based for arduino,compatible with UNO R3..
  • Components can be soldered directly on the board, or through the mini breadboard above..
  • Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560..
Check Stock

Dragon Ball Z Vegeta Saiyan Armor Costume Cosplay Shirt

  • The proud prince of saiyan. The armor of the shoulder is closer to the prototype..
  • Baby clothes patterns due to the animation prototype design, there are color differences. Color Difference due to screen difference.
  • Take Super Animation as the prototype. Suitable for masquerade, outdoor wear, photo tour. Let your baby become the prince of the Super Saiyan!.
  • We aim to improve the user experience and product quality If you receive a bad one, please feel free to contact us and we can send you a new one with....
Check Stock