Top Rapco V Cable Reviews

LiPo Battery Charger Discharger with Balance, 80W 6A RC Battery Charger for 1S-6S LiPo/Li-Fe/Li-ion 1S-15S NiMH/NiCD Batteries

...ent Protection and Over-Temperature Protection..
【Easy To Use】This RC battery charger is equipped with a bright LCD screen which makes all charging statuses and settings clear at a glance，you can navigate the modes and selections very conveniently..
【What You Get】 HB6 lipo balance charger, AC/DC adapter, AC cable, 4mm banana plug to Deans Charge Cable, Alligator Clip DC Cable, Deans to Alligator Clip Converter Cable, Deans to JST Converter Cable, Deans to Futaba Converter Cable, English User Manual. And your charger includes a 12 month warranty..

Check Stock

Blomiky 2 Pack 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Old Version UDI001 UDI008 UDI009 and HJ808 RC Boat Battery UDI001 USB 2

SM-4P Connector Plug, Only in RC Boat Battery which use same SM-4P plug. When put in plug convex side on above,flat side on below., first and third pin is positive, second and forth pin is negative. please make sure your battery is same. don't reversed..
USB charger cable built-in over-charged IC circuit protection,Red ligth is solid when charging, change to green light solid after full charged. 7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Old Version UDIRC UDI001 UDI008 RC Boat.
7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for Altair AA102 Big size Red RC Boat and Altair MidSize AA Wave RC Remote Control Boat Yellow colour,.
7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug for batttery fit for DEERC 2008 RC Boat Remote Control Boat with LED Light and HONGXUNJIE HJ808 Red and Blue 2.4Ghz RC Boat.
7.4V / 2 x 3.7V 400mA USB Charger Cable with SM-4P 4 pin Plug fit for Cheerwing Venom Black orange RC Boat Remote Control Boat battery..

Check Stock

Blomiky 2 Pack 3.7V USB Charger Cable with SM-2P Plug Connector for Small RC Amphibious Stunt RC Car Boat Trucks 3.7V Li-ion and Li-Polymer Battery 3.7V USB 2

Charge connector plug: SM-2P black 2 pin, only fit for 3.7V 400mAh 500mAh 800mAh Li-ion or Lipo rechargeable battery, small capacity battery, charge is very slow, don't advise use in big capacity battery,such as real 1500mAh battery, it may take over 15 -25 hours to full charge..
Don't use in such 1500mah big capacity battery,Ita may take over 15 hours to full charge. 3.7V USB Charger cable suitable for Small Size RC Cars RC Boat, RC Trucks ,charger cable suitable for AUSUT EACHINE EC21 Amphibious NQD SPESXFUN 1/16 RC Vehicle Sharkool Cradream MissCat 4WD Stunt RC Car Cars 500mAh Li-ion Battery.
3.7V USB Charger cable suitable for DEERC DE42 DE44 DE45 DE68 DE69 RC Trucks , Charger cable suitable for BEZGAR TS201 TC141 TB202 TB201 Toy Grade 1:20 Scale RC Trucks, Charger cable suitable for FREE TO FLY Seckton Small Remote Control RC Car 3.7V Battery.
3.7V USB Charger cable suitable for SparkMaster 1/16 Drift RC Car Kidfavor H116 SZJJX 2 IN 1 IOKUKI Force1 Wave Speeder tonason Seckton Alligator Head Small size RC Boat Battery..
3.7V USB charger adpater cable suitable for Blexy 1/18 scale water-resistance RC Car and suitable for 4DRC C3 RC Cars battery.

Check Stock

MAXOAK CPAP Battery Backup CPAP Power Bank Compatible with Airsense 10/Airsense 11/Airmini/Aircurve 10/S9/Dreamstation/System one Z1 Mini Travel Camping Emergency Power DC12/15/24V&USB5V

[Wide Compatibility] – This 297Wh CPAP battery backup is compatible with 12V/24V CPAP, including System one 60 & 50 series, Airsense/Aircurve 10, Airsense 11, AirMini, Resmed S9, Dreamstation, HDM Z1 (12V only, not for 15V HDM), Transcend Mini, Airmini (cable not included, inquiry seller to buy), and other 12V, 15~18V or 24V CPAP, providing power backup during power outages. NOTE: Humidifier/Heater on and high pressure will drive lots of currents. Turning off the heater and humidifier will prolong the battery running time..
[Multiple Outputs for Various Needs] – This CPAP portable charger features 3 DC outputs (12V 5A/15V 4A/24V 4A) that can easily charge CPAP and BiPAP. It can also charge LED light bulbs, LED strips, fans, and laptops (DC connector/cable is not included). Besides, with a fast-charging 5V 2.5A USB port, it is able to charge 5V USB-powered devices like smartphones, tablets, etc..
[Lightweight & Portable] – With a size of 8.7 x 2.5 x 7.9 in and weighing 4.1 lbs, the power bank, with an ergonomic handle, is easy to carry around wherever you need it. Perfect for emergencies, camping, and traveling..
[Safe & Reliable] – A built-in auto-level Lithium battery cell and the advanced BMS provide layers of protection (over-voltage/low....

Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Check Stock

Blomiky 2 Pack 7.4V 1A USB Charger Cable with XH-3P Plug for 7.4V 2S Lipo Battery with XH-3P Connector 7.4V 1A USB XH-3P 2

Charge connector plug: XH-3P white 3 pin ,plug end cross-section size: 10*5.8mm/0.4*0.23inch(L*W)..
2pcs USB Charger Cable 1A with XH-3P Connector for Hosim 9125 Q903 Q905 Axial SCX10 2S 7.4V LiPo Battery RC Car Rock Crawler FPV Drone Quadcopter.
Intelligent charge protection:The 7.4V 2S Li-ion LiPo Battery USB Charger Cable built-in over-voltage charged IC protection circuit. green light is....
7.4V 1A Charger cable fit for 7.4V 2S 1100mAh 1200mAh 1300mAh 1400mAh 1500mAh 1600mAh 1700mAh 1800mAh 2000mAh 2200mAh Li-ion or Li-po battery, which....
7.4V 1A Charger cable fit for 7.4V 2S 500mah 350mAh 600mah 850mAh 1000mAh 9125 S920 Q903 144001 RC Car RC Helicopter Li-ion or Li-po battery, which....

Check Stock

Lipo Battery Charger, 1S-6S Balanced Charger Discharger, 1-6S Lipo Li-ion NiMH NiCD Li-Fe Battery with Tamiya XT60 Deans Futaba Connector

...S-6S）, Li-ion 3.6V-21.6V (1S-6S）, LiFePO4 3.3V-19.8V (1S-6S), NiMH/NiCD 1.2V-18.0V(1S-15S)，SLA（ 2V-24V）..
More connector types- This RC battery balance charger is compatible with almost all popular RC battery connectors, like Tamiya, Deans, XT60, Futaba connectors. Conveniently, you don't need to buy other cables separately..
Multiple advanced functions - More than a regular Lipo battery charger, it comes with features like balancing charging, fast charging, memory storage&load, cyclic charging&discharging, warning and error message, processing time limit, and much more information in the program..
Package included - 1×V6 battery charger.
1×T-Crocodile Clipe；1× XT60 Plug；1×4mm to Deans Charge Cable；1×Timiya cable.
Wide voltages compatibility - Work with voltages ranges from 1.2 volts to 18 volts for nickel-metal hydride or nickel-cadmium battery packs, and Lithium battery packs with voltages from 3.7 volts to 22.2 volts..
Higher safety standards- This multi-battery charger is built in an advanced smart chip to avoid over-current, over-discharge, over-voltage, and short-circuit. And it has been strictly processed to reach higher safety standards..

Check Stock

VIARON Bike Brake Set, Black Front and Rear Bike Black V-Brakes Kit, Includes Brake Calipers Lever and Brake Cable Housing Kit (V-Brake kit red)

Complete quantity： 4 V-breaker front and rear(2pairs), 2 pairs of brake pads, 2 guide tube, 2 dust caps, and 4 standard 20mm bolts.1 pair of black aluminum alloy brake levers (two fingers), 1 front brake cable and 1 rear brake cable (brake cable and housing kit).
Size: Bicycle V-Clamp Arch Size: 110mm. Brake pads: 70mm. Brake lever: two fingers. Brake Cable Housing: 2.5m long and 5mm diameter. Two brake cable lengths: 1.7m and 1.1m..
High quality material: 1: Aluminum alloy forged brake arm. 2: High-quality rubber brake pads, wear-resistant and durable. 3: Aluminum alloy forged brake lever, anodized. 4: Quality standard galvanized brake wire, strong and corrosion-resistant. 5: High wear-resistant and corrosion-resistant PE material brake line housing..
Scope of application: VIARON bicycle V-brake kit is suitable for most mountain bikes, road bikes, BMX, etc., universal V-brake perfect bicycle brake replacement..
Features: Bike brake levers are durable. The V-clamp brake arm tension is adjustable. The brake pads are wear-resistant and durable. Brake cable and housing kit set has stronger toughness and high wear resistance. Provides a better, smoother braking experience..

Check Stock

Tab A 8.0 T387 USB Charging Port Flex Cable Replacement T387V T387W T387P T387T microUSB Charger Dock Board Flex Cable Connector for Samsung Galaxy Tab A 8.0 (2018) SM-T387 Port Flex Cable Repair Part

★ COMPATIBLE MODELS --- The Tab A 8.0 inch T387 USB Charging Port Flex Cable Connector Replacement Compatible Only Fit for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V SM-T387A SM-T387P SM-T387T 2018 Version Charger Board Repair Part With Tools,Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
★ HIGH QUALITY --- The T387 Charging Port microUSB Flex Cable USB Charger Port 100% Tested Well Before Shipping Out .100% Perfect Fit for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V Charging Port Flex Cable Ribbon..
★ WHAT YOU GET --- 1 Piece T387 Charging Port Flex Cable Replacement SM-T387 USB Charging Port Board Flex Cable for Galaxy TAB A 8.0 2018 T387V. 1 Set Repair Tools..
★ IMPOTANT --- Please Double Make Sure Your Phone Model is SM-T387 Before Buy the Replacement USB Charging Port Board Flex Cable for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V .It is Don't Fit Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
★ ATTENTION: The T387 Charging Port Don'T Include The Installation Instructions. Please Make Sure That You Can Repair It Before Buy The TAB A 8.0 2018 T387 Charging Port Flex Cable.The SM-T387V USB Port Flex Cable Is Replacement Part For Your Damage Or No Working SM-T387 Charging....

Check Stock

Hiyiton Dual Lipo Battery Balance Charger Discharger 10A DC 240W AC 150W Dual Port LCD Display RC Hobby Battery Charger for Lipo Li-ion Life LiHV NiCd NiMH PB Smart Batteries

Dual Port RC Charger- The charger with DC AC dual input port and two channels, can charge two different kinds of batteries simultaneously with different voltages, but please don’t charge two different batteries at the same channel and don’t use the AC power cable and DC cable at the same time.
High Charge Current – The dual lipo battery charger could support power distribution, AC input max power 150W(CH1+CH2=150W), 100-240V.
DC input max power 240W(CH1+CH2=240W), 11-18V, charge rate up to 10A, your charging time is now faster than ever before..
Support Various Batteries – It is compatible with various kinds of RC toy batteries,support like Lipo:3.7V-22.2V(1S-6S),LiFe:3.3V-19.8V(1S-6S),Li-ion:3.6V-21.6V(1S-6S),LiHv:3.8V-22.8V(1S-6S), NiMH: 1.2V-18V(1S-15S), NiCd: (1.2V-18V)1S-15S), PB/SLA: 2-20V.Smart Battery(I,II,III 5-27V, 0.1-6A)..
Multi-functional Charger-It not only comes with features like balance charge, fast charge, storage charge, cyclic charge & discharge, 20*2 groups of memorized datas, but also is designed with Battery meter,Lithium battery internal resistance checking, Adjustable digital DC power etc, which makes it super convenient!.
Max SAFETY -This lipo battery charger with low input voltage limit, automatic charge current limit, ....

Check Stock

Transformateur

✈【Patented product with Patent number: US10270355B1, it has New Feature: This upgraded version WORKS PERFECTLY for Hair Straightener and Hair....
✈【Worldwide Use】1 US power cable and 5 International adapters (UK, EU, AU, IT, IN adapter), step down voltage converts 220/240V to 110/120V, so....
✈【Safety & Quiet】Fan work silent and converter will auto shutdown for surge protection, overheat, over-current, over-temperature or short....
✈【Converter & Travel Size】Converts voltage in different countries from 90V-260V to USA standard 110V. Compact small size (4.9X2.9X1.2 inches)....
✈【WHAT YOU GET】ALLWEI Universal Travel Adapter, Include 5 feet detachable US power cable and 5 International adapters, storage bag,user manual,....

Check Stock

HDMI Tester Portable High Definition Network Cable Tester Checker NF-622 LED Indicator to Check Disorder Short Open and Cross Status of HDMI Cables and Hd Wire Test Ideal for Troubleshooting

【Application of UT681】UT681 Handheld HDMI Cable Tester is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).It supports two test modes, fast scan mode and full display mode..
【Function of UT681】This Cable Tester Checker can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.Support Continuity Test,Short Circuit Test,Crossover Test,Network Cable Test..
【Double testing mode】At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen..
【Cable Type That Can Be Measured】Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A).
b.Both ends are HDMI Mini connectors (Type C - Type C).
c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C).
【Safe Tester】HDMI tester support battery low voltage Test.In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down..

Check Stock

NewFantasia Replacement Cable for Sol Republic Master Tracks HD V8 V10 V12 Sol Republic X3 Headphones Black

Replacement Audio upgrade Cable For Sol Republic Master Tracks HD V8, V10, V12, Sol Republic X3 Headphone extension cords.
jack:3.5mm male to 2 x 2.5mm jack ,length:1.2meters(4ft),color:Black,.
package include:1*Black replacement cable(the headphone is not included),.
Replacement cable work with Sol Republic Master Tracks HD/Tracks HD2/Sol Republic V8/Sol Republic V10/Sol Republic 12/Sol Republic X3 headphones.

Check Stock