Top Ramp Tie Down Kit Reviews

Folding Wheelchair Cargo Carrier Mobility Scooter Loading Ramp Heavy Duty Strong Hitch Cargo

Fits all 2" Receiver, hitch class III or IV.
Heavy-duty steel construction and internal spring loaded pull locks , Durable black powder coated finish..
Has a 3" safety rail, 3-position carrier (closed flat, open L-shape & open flat).
Awelded handle featured on the ramp for easy folding and unfolding,Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides..
Package included: Scooter Carrier X1 ,Hardwares. (note: Anti Wobble Plate not included).

Check Stock

Boat Load Mate: Automatic Boat Latch Secures Boat to Trailer While Launching & Loading

LAUNCH & LOAD YOUR BOAT WITH NO EFFORT: No more struggling on the ramp with a tow strap, dock line, or other boat trailer straps. Relieve yourself from cranking on a boat winch, tinkering with tie down straps while on the ramp. With Boat-Load-Mate you are able to launch & load your boat without using any boating equipment. In fact, you are able to get your boat in and out of the water without stepping foot on the landing. Absolutely no manual labor is required..
KEEP YOU AND YOUR BOAT SAFE: Spending less time on the boat ramp decreases your chance for accidents, injuries, and damage to your equipment. Boat-Load-Mate will keep you safe by reducing the amount of time that you and your boat spend in the hectic bottleneck area of a launch. Boat-Load-Mate enables you to get your boat in & out fast. Boat-Load-Mate automatically latches and catches the transom & protects your boat from falling off the trailer while on the ramp..
MANUFACTURED IN AMERICA: Boat-Load-Mate has been cleverly engineered and built for strength. Each unit is capable of securing 2,500lbs of direct impact. Use two units for vessels that weigh 2,500 - 5,000lbs. There is no need to use a boat trailer winch, tow ropes, or boat tie down straps to trailer while on the ramp. Of course, you sh....

Check Stock

Black Widow Aluminum Double eBike or Fat Tire Bike Carrier - 600 lb. Capacity

Lightweight, high-strength aluminum carrier and loading ramp.
600 lb. total weight capacity - 400 lbs. maximum per bike.
Dual-purpose design is sturdy enough for dirt bikes.
Transport up to two eBikes or fat tire bikes.
45.5" L self-storing loading ramp with a welded hook.
Roll-on, roll-off ramp design for easy loading and unloading.
Includes an anti-rattle device to prevent tilt and wobble in motion.

Check Stock

CARSTY 48.8\ x 27.8\ Trailer Hitch Cargo Carrier 500LBS Utility Basket with 42\ Folding Wheelchair Ramp for Wheelchair Scooter Lawn Mower Snow Blower Hauler, Fits 2'' Trailer Mounted Hitches, Black

【Three Position Ramp】3-position carrier (closed flat, open L-shape & open flat.) Folding ramp can also be locked flat when not in use. The ramp folds out for easy loading of a mobility scooter, push lawn mower, snow blower or other cargo..
【A Perfect Transportation】This wheelchair carrier is made for easy loading and transporting of your wheelchair, scooter, lawn mower or other similar items. It can be used as a carrier and a ramp.
【High Quality Steel Material】Durable black powder coated finish, heavy duty steel construction, the hitch cargo carrier is sturdy and durable. It has the maximum bearing capacity of 500 lbs, and it weighs 71 lbs..
【Humanized Designs】Fits all 2" Receiver, hitch class III or IV.
5” safety rail to prevent cargo from falling down.
Multiple tie-down points for securing your cargo.
Reflectors to increase safety while driving on the road at night..
【Applicable to a Variety of Vehicles】Deluxe steel cargo carrier with ramp is ideal for transporting scooters, wheelchairs, mowers, tools and equipment. This hitch-mounted carrier is suitable for most vehicles, like trucks, SUVs or vans..

Check Stock

Motorhot 2 Pcs 10 ft Folding Arched Ramps Lawnmower ATV Truck Motorcycle Ramp Black Aluminum Frame Loading 1200lb Capacity

Motorhot 10 ft folded arched aluminum ramp. Fit for ATV UTV, Lawn Mower, Truck, Motorcycle, Arcingle, Trailers, Dirt Bike, Garden Tractor and so on..
Lightweight folding design, It won’t take up to much space when it is folded.
Dimensions:120″ L x 11.6″W x 1.96″H(each), Folded Dimensions: 60″L x 11.6″W x 5.9”H (each).
Loading 1200-Pound Capacity: The max loading weight capacity of this loading ramp is 1200 lbs pcs,serrated crossbars design to will allow great traction.
Package content: 2 x 10 ft Aluminum Arched Folding Ramp.

Check Stock

TRIBLE SIX 2Pcs 7.5' Folding Loading Ramp Motorcycle ATV Lawnmower Truck Trailer Ramps (All aluminum and welded,1500lb Capacity)

【Application】7.5' perforated Non-Plate folded aluminum ramp. Fit for: ATV & UTV, Lawn Mower , Truck , Motorcycle , Trailers , Dirt Bike and Garden Tractor.
【Feature】 Capacity：max load up to 1500 lb----Dimensions : 91"x11.5" (each), Folded Dimensions: 45.5"x11.5"x6" (each).
【Include】 2 pcs Aluminum Folding Ramp, Tie Down Straps Included.
【Safety】 High quality, constructed of durable 6061 Aluminum.Comes with rubber tipped fingers and safety straps and its built-in traction surface prevents slippage..
【kindly note】The Aluminum ramp have some elasticity,there will be a litte curved when you use it..

Check Stock

Silver Spring SC500-V3 Folding Steel Scooter and Wheelchair Carrier with Ramp, Black

Manufactured from durable, powder-coated steel with a 500 lb. weight capacity.
Product dimensions | Platform – 48” L x 28” W | Ramp – 59.125” L x 27.5” W | Weight – 86 lbs. | Weight limit – 500 lbs.| Hitch pin – 5/8”.
Includes a three-position, folding loading ramp, anti-rattle device, and 5/8" hitch pin.
Carry scooters and wheelchairs behind any vehicle with a Class III or IV 2" hitch receiver.
Folds manually upright against vehicle when not in use and includes ten tie-down points for maximum security.

Check Stock

HLCC Complete Axle Strap Tie Down Kit with Car Tie Down Ratchet Straps, Includes (4) 22\ Axle Straps, (4) 36\ Axle Straps, and (4) 8' Snap Hook Ratchet Straps

Axle Strap Tie Down Kit - Complete kit includes (4) 22" axle straps, (4) 36" axle straps, (4) 8' snap hook ratchet straps. Straps are made of durable polyester webbing does not stretch when you tighten it down. It's a complete tie down kit, everything you need for securing a car or buggy to a trailer..
The Axle Tie Down Strap has a working load of 3,300 pounds and will not break during transport, ensuring the safety of cargo and equipment. Provides durable and reliable safety for heavy cargo transportation..
Car Tie Down Straps for Towing - Heavy duty ratchet with snap hook and D-ring can be attached to your car with the other end attached directly to the anchor point, which allows for a very stable and secure way to secure your car or tow it. Using 2 different sizes of axle straps, you can make a lasso around your tires..
Easy To Use - car tie down strap is easy to adjust the length, allowing you tie-down any cargo. 8 axle straps easily connect snap hooks, and ratchet locks secure cargo in the transport position, preventing them from being damaged or falling off..
Tie down strap is widely use, ideal for tie down trailer, hauling cars, moving cargo, motorcycles, trunk, bicycles, furniture, cargo, ATV, boats..

Check Stock

Rage Powersports Silver Spring SC500-AF Folding Aluminum Scooter and Wheelchair Carrier with Ramp

Carry scooters and wheelchairs behind any vehicle with a Class III or IV 2” hitch receiver.
Folds upright against vehicle when not in use with four tie-down points for maximum security.
Includes a three-position loading ramp, anti-rattle device, 5/8" hitch pin, and a T-handle spring pull pin.
Manufactured from aluminum and powder-coated steel with a 500 lb. weight capacity.

Check Stock

AIEVE Cooler Tie Down Kit for YETI Coolers,Cooler Tie Downs Straps Secure Yeti and RTIC Coolers to Boat,Deck,Truck Bed,Trailer and Prevent from Slipping

The cooler tie down kit secure cooler in place, fit for YETI coolers and other brand like RTIC coolers with tie-down slots on the boat, deck, truck bed or trailer.
Deck plates made of marine grade stainless steel, not rust, heavy duty cooler straps with cam buckles are very durable and long lasting to use.
Only the low-profile deck plates remain when not in use and leaving nothing to trip over, for yeti tie down kit is very safe for use, perfect cooler accessories.
Easy to use cooler tie down straps, secure deck plates to floor with screws, nylon straps pass through the deck plates and cooler tie-down slot, adjust straps length with cam buckle.
Cooler tie down kit for boat included 2 pack heavy duty nylon straps with cam buckles, 2pcs stainless steel deck plates and 8pcs small screws.

Check Stock

Tie-Down Kit for Coolers | Universal Ice Chest Tie-Down Straps for Boats, Trailers, Trucks, ATVs and More |

UNIVERSAL TIE DOWN KIT: The Blue Coolers Universal Tie-Down Kit is a must have for every serious adventurer that has ever struggled to keep his or her cooler in place in the back of the truck, boat, trailer or anywhere else. This cooler accessory works universally for most roto-molded coolers. The straps are 41 Inches long..
SIMPLE TO INSTALL: This kit is easy to install and uninstall and can be universally used with any cooler that has tie down slots built into the cooler. Strong tie straps that keep your cooler steady during your craziest journeys..
ACCESSIBLE EVEN WHILE STRAPPED DOWN: The best part about this cooler mounting kit is that you won't need to detach the straps every time you want to get into the cooler. By utilizing the tie-down slots built standard in most major rotomolded cooler brands, you can quickly and easily access your cooler while keeping it securely strapped down..
PERFECT FOR BLUE COOLERS 30 QUART COOLER: The Blue Coolers 30 Quart Companion Cooler, combined with this kit, makes a great solution for most side-by-side model RZR's, Can-Am's and other off-road vehicles..

Check Stock

MOTO4U 7.5'Motorcycle Aluminium Truck Ramp Foldable Loading Ramp Folding Heavy Duty Portable Ramp 750 Lbs Capacity for Dirt Bike ATV Bike MX Motorbike Van Trailer AR008 (Meshed,Single)

Material:solid aluminium ramp.Tie down belt to hold the ramp in position is included..
Fitment:for ATV,UTV,lawn mower,truck,motorcycle,trailers,tiller,dirt bike and garden tractor and smaller wheeled tools..
Design:Arched side allows you to load motorcycle weighing up to 750 lbs.Soft tipped design reduces abrasion between your ride and the ramp..
Design:Foldable design makes storage easier.3 caps at the bottom design keep it from slipping and makes safer and stable when loading..
Folded Dimension:116CM x 28CM(LxW).Weight:8KG.

Check Stock

SINCERITYLI Steel Ramp Top Brackets Ramp Top Kit 8-inch Wide for Loading Motorcycle Lawn Mower ATVs Dolleys Wheelbarrows toTruck,Trailer,Pickup

[Application]:This Steel Ramp Top Kit is Designed to turn ordinary 1-1/2 x 8 inch boards into sturdy, all-purpose ramps to LoadLawn Mower ATVs,....
[Advantage]:With 1-1/2* 8-inch wood Boards ,you can quickly DIY a Ramp for your truck adn save your time,2 nylon bandge can keep the ramp from sliping....
[Material]:This Loading Ramp Kit is Made of Heavy Duty steel and is durable than Aluminum Product,The maximum load capacity of each ramp kit is 1000....
[Install]: Assembles in minutes. Ramp Top Dimensions:8 in.Wide.
[Package]: Two 8-inch, solid-steel ramp top. ,2 Nylon Bandage ,four carriage bolts, 2 self adhesive rubber pads (just to protect chrome or painted....

Check Stock