Top Ram Coil Springs Reviews

Supreme Suspensions - 2.5" Front Leveling Kit for 1994-2013 Dodge Ram 2500 3500 and 1994-2001 Dodge Ram 1500 High-Strength Steel Spring Spacers Lift Kit 4WD

COMPATIBLE WITH 1994 - 2001 Dodge Ram 1500 4WD, 1994 - 2013 Dodge Ram 2500 4WD and 1994 - 2012 Dodge Ram 3500 4WD. *Does NOT Fit Ram 1500 Mega Cab or Extended Cab models..
TECHNICAL NOTES: 2.5 Inch Front Suspension Lift. *An alignment is always recommended after altering the height of your vehicle. **Compressing your springs can be VERY dangerous. For a safe installation process we recommend using a Coil Spring Compressor Tool..
HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
BOLT-ON INSTALLATION: After an easy 1-2 hour installation process*, you are ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle..
LIMITED LIFETIME WARRANTY: All Supreme Suspensions brand products have been thoroughly tested before market release and are backed by or Limited Lifetime Warranty..

Check Stock

Proper Spec Discovery 2 Front Coil Spring 2 Spacer Lift Kit - Terrafirma TF525

FIT - This set of Terrafirma coil springs fits your Land Rover Discovery I (1994-1999), Discovery Series II (1999-2004), Defender 90 (1994-1997) and....
NOTE -If your Disco 2 is one of the few vehicles that has rear air suspension (most D2's did not), you will also need our Rear Air....
QUALITY -Terrafirma Coil Springs are made from the highest quality steel, formed on accurate computer controlled mandrels and precisely heat treated....
FEATURES -Heavy load rear coil springs are designed to provide 2” of lift on heavily laden vehicles for commercial and expedition use. These springs....
OE REPLACEMENT - Replaces OE partNRC2119.

Check Stock

Terrafirma Medium Load All-Terrain Shock and Coil Spring Suspension Kit for Land Rover Discovery 2 2 inch lift

FIT -Fits the Land Rover Discovery 2 (1999 - 2004)..
WHAT IS INCLUDED - This kit provides you with (1) Pair of Rear Terrafirma Coil Springs, (1) Pair of Front Terrafirma Coil Springs, (2) Terrafirma....
NOTE -If your Disco 2 is one of the few vehicles that has rear air suspension (most D2's did not), you will also need our Rear Air Suspension To Coil....
FEATURES - Medium load front coil springs are designed to provide 2 inches of lift on vehicles with up to 100kg of additional equipment. The tough....
OE REPLACEMENT - Replaces Land Rover OE Parts RNB103533, RPD102333, RKB101100, and REB101330.

Check Stock

Prokomon 2 Pcs Coil Spring Compressor Tool - Coil Spring Clamps Strut Spring Compressor Tool Set with Safety Guard

◇ Remove and install coil springs, shock absorbers, struts, and spacers safely and efficiently with the 2 PCS Auto Coil Spring Compressor Tool Set.
◇ Many coil spring compressor tools slip and buckle under high tension, heavy duty spring compressor tool bears 1000 kg maximum capacity per pair.
◇ Safety guard bar adjusts from 8 to 11.7 inches (20.3-29.7cm) and prevents accidental pressure release while you work with strong, powerful springs.
Suspension spring tool hook jaws are slanted and have locking mechanisms for increased security.
◇ Automotive coil spring compression tool brackets feature hook jaws that can extend from 1.4 to 11 inches (3.6 to 27.9cm) to fit your cars, trucks, motorcycles, ATVs, and other larger vehicles.
Car spring compressor tool bears up to 2,204.5 pounds (1000kg).
◇ Avoid strut compressors with flimsy hooks creating slippage and other safety problems. coil compressor hooks grip springs tightly by turning easy to use hex nuts.

Check Stock

Rear Set of Terrafirma Coil Springs - Heavy Load TF027V for Land Rover Discovery 1 2 Defender 90 and Range Rover Classic

FIT - This set of Terrafirma coil springs fits your Land Rover Discovery I (1994-1999), Discovery Series II (1999-2004), Defender 90 (1994-1997) and....
NOTE -If your Disco 2 is one of the few vehicles that has rear air suspension (most D2's did not), you will also need our Rear Air....
QUALITY -Terrafirma Coil Springs are made from the highest quality steel, formed on accurate computer controlled mandrels and precisely heat treated....
FEATURES -Heavy load rear coil springs are designed to provide 2” of lift on heavily laden vehicles for commercial and expedition use. These springs....
OE REPLACEMENT - Replaces OE partNRC2119.

Check Stock

2pc Spring Compressor Tool - Heavy Duty Build, Ultra Rugged Coil

Coil spring tool work can be dangerous. Grease threads well to preserve threads and avoid.
Wide jaw capacity (23 mm - 280 mm) make coil spring compressor tool is ideal for a range of vehicles, assisting the mechanic with years of compression jobs..
Avoid strut compressors with flimsy hooks creating slippage and other safety problems. The coil compressor hooks grip springs tightly by turning easy to use hex nuts..
Many coil spring compressor tools slip and buckle under high tension, Our heavy duty spring compressor tool bears 1200 kg maximum capacity per pair. Ideal solution for larger vehicles..
Heavy duty spring compressor for struts and coil springs reduces tool flexing, bending, and warping, providing confidence to the mechanic..

Check Stock

Eastwood Macpherson Interchangeable Fork Strut Coil Spring Compressor Extractor Tool Set Style

The Fairmount Interchangeable Macpherson Strut Compressor Kit Includes All The Components Required To Compress Springs On The Suspension Of Most Non-Commercial Vehicles..
Interchangeable Yokes For Endless Strut/Coil Combinations.
Safest Way Of Maintaining Coil Springs And Struts.

Check Stock

ALDAN AMERICAN FRONT & REAR COILOVER KIT,ADJUSTABLE,FOR 68-72 A-BODY,GTO,CUTLASS,SBC

Brand New Aldan American Adjustable Coilover Kit for the Front and the Rear of the vehicles listed below (Front Part #AB2FMS and Rear Part #ABRMS)..
Fits: 1968-1972 A-Body with a Small Block Chevy engine.
Features: Single adjustable coilovers | Adjustable ride height: Front: from 0.0" to 2.0" lowered & Rear: from 0.5" to 3.0" lowered | Spring Rate: Front: 450 lbs/in & Rear: 140 lbs/in | Provides full adjustment of shocks, springs, and shock damping | Gas charged | 6 front and 11 rear adjustable valving selections.
Convert your front and rear suspension to coil-overs. Aldan Phantom Series, single adjustable coil-overs deliver superior handling & ride quality for a drastic improvement over stock suspension..
Aldan High tensile, high travel coil-springs provide greater consistency over stock springs. Aldan coil-over kits are ride-height adjustable allowing you to properly lower your ride-height. Great for street & autocross applications..

Check Stock

Powerbuilt Coil Spring Compressor Tool Kit Compress Coil Vehicle Suspensions Remove and Install Coil Springs Storage Case - 948012

For compressing coil suspension springs on most automobiles.
Designed for removing and installing automotive coil springs.

Check Stock

Sunset Trading Heaven on Earth Recliner, Tan

...lected Hardwoods, glued and corner blocked for extra durability | cenro reclining mechanisms are built on a heavy duty Steel rail system to give you generations of trouble free use | recliner extends to 64 inches | requires 2" Clearance from Wall.
seating and back frames Equipped with sinuous heavy duty no sag springs | Seat Cushions contain pocket Coil seating which consists of separately covered Coil springs, wrapped in a specially designed foam casing, protected by a layer of Dacron. This fabric pocket allows each Spring to slide up and Down individually of the spring next to it. The extra high density of the encasing foam provides the best possible conformity to your body curves. Each time you stand up from this chair, all the springs expand and press outwards, preserving the shape of the Seat cushion.
The high tension Coil wire makes the Seat cushion more supportive and buoyant so this chair will outlast pieces Using old-style foam Cushions that can break down over time and lose their support.
The pocket springs in this durable, yet amazingly comfortable chair will give you consistent support your family will enjoy for generations!.
Dimensions: overall: 39"H x 38"D x 39"W | Seat: 20"H x 22"D x 19"W | weight capacity: 360 lbs. | chair weight....

Check Stock

MroMax Drill Press Return Spring, Quill Spring Feed Return Coil Spring Assembly 26.77\x0.31\x0.03\2PCS

【Dimension】 Expand Length:680mm/26.77".
【Installation form】Inner Mounting Type: Hook.
【Premium & Durable Material】 Spring steel(60Si3Mn) has excellent metallurgical quality (high purity and uniformity), good surface quality (strict control of surface defects and decarburization), precise shape and size.
【Wide Range of Applications】This is the chrome-plated spring that returns the sleeve to the top after drilling. Suitable for various vacuum cleaner coil springs, volume tube coil springs, safety coil springs, etc..
【Package content】 2PCS x Drill Press Spring.

Check Stock

Set of 2 Terrafirma Front Coil Spring Spacers TF516 for Defender 90 Discovery and Range Rover Classic

Made from the highest quality steel, formed on accurate computer controlled mandrels, and precisely heat treated to ensure consistent manufacture..
Shot peened to relieve stress and scragged to ensure long spring life and prevent sag and are powder coated silver for long-lasting good looks..
Includes one (1) pair of TF015 heavy load front coil springs and one (1) pair of TF027V heavy load rear coil springs..
Replace Land Rover OE parts NRC4306 and ANR3477.
and fits the Defender 90 (1994 - 1997), Discovery 1 (1994 - 1999), and Range Rover Classic (1987 -....
Note: Heavy load coil springs are designed to provide 2 inches front lift on vehicles with 100kg of additional equipment and 2 inches of rear lift....

Check Stock

SCITOO 2Pcs Macpherson Strut Spring Compressor Tool 11.5\ fit for 13/16\ Socket 1/2\ Drive

...TOO coil spring compressor fit for Macpherson strut coils of various sizes. Working with manual or power tool's 1/2 inch square drive or 13/16 inch hex sockets to compress the coil spring to replace the shock absorber unit or spring.
11.5 inch threaded rod for maximum opening to 10.5 inch on MacPherson struts springs to install the jaws to the coil, suitable for most vehicles with MacPherson strut springs..
【PRODUCT USAGE】 Common to strut assembly from vehicle to transfer old spring to new strut, to repairs on bent struts, strut tubes, and damaged pieces. Compress the strut spring coils for convenience when replacing strut assembly and springs contact and built-in detent pins lock the spring coil in place for safer operation. Lubricate threads withseize compound for prolonged life..
【BUILT TO LAST】 The threaded rod is made from carbon steel and the hooks are forged steel, high-quality materials provide better compression resistance and long service lifetime. Easy to use, suitable for both professional mechanic and beginner use..
【LOCKED FIRMLY】 The SCITOO threaded rod has a wide spring contact surface and a built-in positioning pin, which can lock the coil spring in place to ensure safer compression of the spring..

Check Stock