Top Rafter Tie down Reviews

Mr. Pen- Rafter Square and Combination Square Tool Set, Black, 7" Square, 12" Aluminum Carpenter Square, Framing Square, Square Tool, Woodworking Square, Combo Square, 7 Inch

  • Package includes 1 piece of 12" combination square and 1 piece of 7" rafter square. The 12" combination square can be used as a level, depth gauge, and ruler, while the 7" rafter square can be used as a straight edge for marking and sawing..
  • 12-inch heavy-duty combination square ensures accuracy with its spring-loaded brass bolt. It includes a brass scriber and level while its stainless steel blade is precisely marked with inch and cm graduations in 1/16,1/8, and 1/32 Inch increments for your convenience..
  • 7-inch triangle square is perfect for use on the job site or at home.
  • this heavy-gauge die-cast billet aluminum alloy square fits easily into your pocket and comes with gradations to mark common, hip, valley, and jack rafters. The non-glare matte finish makes it easy to read in any light condition..
  • Mr. Pen 12" combination square is designed with a durable, rustproof stainless steel blade to last through tough job site conditions, while Mr. Pen 7" rafter square is made of heavy-gauge die-cast billet aluminum alloy construction that increases accuracy over laser-etched extruded stamped rafter ....
Check Stock

Nuvo Iron RC3 Black Galvanized Steel 2\ Traditional Clips-12 Pack Rafter Clips

  • These clean and contemporary, long lasting rafter clips are designed to accent any outdoor structure (decks, gazebos, pergolas, privacy walls, arbors etc.).
  • Unlike other rafter clips, ours are pre-finished, require no painting and ready for an easy install right out of the box.
  • Features a thermally bonded and polyester textured black powder coated satin finish.
  • We designed our rafter clips to be an integral part of your structure without you having to sacrifice the look of your design.
  • Installation process is quick and intuitive..
Check Stock

kammqi Rafter Square with Level Carpenter Squares Triangle Square 7 Inch Square Ruler Aluminum Layout Tools for Woodworking (Silver 7inch)

  • 【High quality】:7-inch Rafter Square made of precise Heavy-gauge aluminum alloy, solid aluminum alloy for durability, high hardness and corrosion-resistant, the rafter square has undergone multiple polishing, and the surface is smooth and does not hurt hands, easy to carry..
  • 【Precision and Durable 】: Accurate clear scale and permanent markings square ruler is constructed for maximum durability, it has legibility and long-lasting usage, carpenter square give accurate measurement, mark up to the finest millimeter..
  • 【User-Friendly】: Easy to read spirit level , you can easily brace the rafter square flush with the wood, embedded magnet has good suction force, the stainless steel ruler is easier to slide for measurement, easy to detach the stainless steel ruler increase product practicality and versatility..
  • 【Multi-Function】: 7-inch Multiple graduation rafter square has many kinds of Application, suitable for marking Square And 45-Degree Lines, protractor, framing square, triangle square, marking horizontal base, great companion for carpenters and builders..
  • 【Guarantee and Suitability 】: 30 days free replacement parts ,1-year warranty, and full life customer service. Good for carpenters, professionals, hobbyists, craftsman and builders..
Check Stock

kammqi Carpenter Squares Rafter Square with Level 7 Inch Metal Triangle Square Carpenter Tools Layout Tools Stainless Steel Woodworking Square (Black 7inch)

  • 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

WORKPRO Rafter Square and Combination Square Tool Set 7 in Aluminum Alloy Die-Casting Carpenter Square and 12 Inch Zinc-Alloy Die-Casting Square Ruler Combo Rafter Square Layout Tool

  • Durable Material - The rafter square is die-cast from heavy-gauge aluminum alloy which enables it to last long and still give an accurate measurement. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish..
  • Clearly Identifiable Scale - The rafter square finishing features low glare and protective powder coated. It has permanent deep markings and white graduations for max readability in any lighting. The stainless steel ruler of the combination square has a deep etching scale for superior legibility and long-lasting usage..
  • Multiple Graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, miter square, and protractor square. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale values: 1/16”, 1/32”, and 1mm..
  • User-Friendly - Lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge. The spring screw of the combination square makes it easier to detach the stainless steel ruler and the smooth ruler is easier to slide for your measurement..
  • Wide Versatility - Easy-to-read level vial and....
Check Stock

DEWALT DWF83PL Collated Framing Nails, One Size, Yellow/Black

  • Industrial grade design for high speed and high volume framing applications.
  • Recoil dampening engine system to minimize recoil. Adjustable rafter hook.
  • Lightweight at only 8 lbs. With enhanced ergonomics and balance for comfort and control.
  • Tool free Features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode.
Check Stock

Alfa Gear Heavy Duty Hood and Trunk Straps,Reflective Lashing Tie Down Straps 1200 lbs Capacity,16.4ft 1/4\ Ratchet Tie Down Rope Ultimate Solution kit for Trailing The Kayak/Canoe/SUP/Surfboard

  • Ultimate Tie Down Anchor Strap kits for Hauling cars on top. 2 pcs of Hood Loop Straps, 2 pcs of Hood Trunk tie down straps, 2 pcs Tie down Straps, 2 pcs 16.4 FT long 1/4" Ratchet tie down polypropylene heavy duty ropes, help to solve all the problems that you need to securing your gears on roof top. One stop solution for all your needs.
  • 2 pcs 16.4 ft long 1/4" Ratchet tie down polypropylene heavy duty ropes, help to securing the front and end of your gears on rooftop.Ratchet tie down straps help to secure your gears from swinging and Sliding backwards. This can be use for tarp, tent or clothing thread for outdoor camping.
  • 2 pcs 15ft long 1" wide Tie down strap with metal clamp and anti scratch pads, 1200 lbs breaking strength. Extra wide straps help to Securing goods when driving on road,Multi usage for tie down all your gear on rooftop, trucks, Travel trailers,SUP,Ladders, Furnitures ,motorcycle, ATVs, Boat etc.
  • 2 pcs of 9.8" Hood loop tie down straps with Dia 0.4"" grommet hole and 2 pcs of Hood Trunk tie down straps , help to create anchor point under your hood and back side of your trunk or tailgate , no more bend over or crawl underneath to find a solid locations. Tuck in the hoods, when not using them,No more hood scratch from straps and buckles.
Check Stock

Suitable for Hitachi FN83A /NR83A /NR83A2/NR83A2(S)/FR350A frame nail gun donut flush nailer parts replacement

  • GH1 "L" Shaped Rafter Hook (Aluminum) Compatible with Nail Guns with 3/8" NPT Air Fitting.
  • Includes (1) "L" Shaped Rafter Hook (Aluminum) as pictured.
Check Stock

Boat Tie Down Straps to Trailer | Boat Transom Tie Down Straps Made in New Zealand with Superior Strength of 2,400lbs UV Treated | 1\ x 2.5’ Heavy Duty Ratchet Boat Straps Trailer Tie Down (Pack of 2)

  • Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
  • Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down....
Check Stock

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

  • Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
  • Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension a....
Check Stock

Jetski Ratchet Strap Tie Down Strap - Made in NZ - 1\ x 8\’ Heavy Duty Tiedown with Floating PVC Hook - for Jetskis, Seadoo, Waverunner & PWCs - 1,800lbs Break Strength - 1 Strap (Blue)

  • ...manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn imported from Spain. This means no damage from the sun. We use Thicker webbing for durability and heat seals to prevent and minimise fraying. You are buying directly from the manufacturer. These Jet Ski Tie Downs are designed for the tough USA conditions and made to last. We make the best sea toy accessories and do not compromise on quality.
  • QUALITY JETSKI, WAVERUNNER, PWC TIE DOWN KIT - These Tie Downs were designed specifically for Jetskis and Watercraft. They include a 3rd Hook for three point attachment, enables extra secure transport for your Jetski, Wave runner or Sea Doo on your trailer . These Tie Downs are designed with a Heavy duty rubber protector, permanently positioned behind the rachet to avoid damage to your watercraft..
  • SUPERIOR BREAK STRENGTH - The Break Strength for this product is 1,800lbs. Our Marine Tie Downs feature Polypropylene Yarn which does not stretch or lose its strength when wet - important for marine tie downs. All of our Tie Downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards of durability, giving you peace of mind that your Boat, Jetski or Watercraft is saf....
Check Stock

Mega Cargo Control 2” x 30’ Tie Down Double Wire J Hook Ratchet Straps for Trucks, Trailers & Powersports (Black, 1 Pack)

  • ⭐ 1 PACK BLACK TIE-DOWN RATCHET STRAPS - with Double Wire J Hook End Fittings are 2 Inches x 30FT Long. These Tie-Down Straps are one of the most go-to Tie-Down Assembelies as They Secure Perfectly on a Flatbed Trailer. Both of Tie-Down Double Wire J Hooks and Flat Hook Tie-Down Secure perfectly on Tow Trucks, utility trailers, flatbed trailers, truck, and compatible to Tie-Down Items such as Motorcycles Sand Rails, Canoes and Kayaks and many other types of Powersport vehicles..
  • ⭐ TIE-DOWN STRAPS WITH DOUBLE J HOOK END FITTINGS - These Extremely Heavy-Duty Tie-Down Straps are crafted with Industrial Grade Webbing using High tensile polyester tie down webbing of 12000 LBS webbing. It’s Special and reinforced weaving patterns make our tie-down assemblies last longer than competitors. With added coating on the webbing- to ensure the webbing is durable for everyday use..
  • ⭐ STURDY, STRONG + SECURE - These Tie Down Straps with Ratchet Buckles Fits with various applications. These Working Load Limit of 3333 LBS Cargo Tie Down Hauling straps are the best secured trailer and trucking accessories that put saftey and priority first. It is stamped on the warning label tag and stenciled through out the assemblies for easy inspection. ✔✔SOME STRAPS MAY C....
Check Stock

Protection Padded Sleeve Straps for Tie Downs by Aerofast. Ratchet Sleeve to Prevent Damage to Your Boat, Jetski, or Waverunner, 4 x 12 Inches. Pack of 2 - Red

  • Multi-Purpose Ratchet Strap Protector - Can be used as an alternative to tie down corner protector on most types of straps that are up to 2.5" wide (6.35cm). These sleeve strap allow for easy repositioning. Simply move up and down tie down strap to suit..
  • Designed For Ultimate Protection During Transport - Protect your webbing with the heavy duty alternative to the fleece tie down cover with this padded tie down strap. Preventing sharp edges or rough surfaces cutting your tie down's webbing or your tie down from scratching your boat, jetski, or waverunner hull, or other precious cargo. The protective sleeves have internal padding for extra protection..
  • Easy To Use Ratchet Strap Protector Sleeve - Protect loads from the ratchet by positioning the ratchet in the centre of the protective sleeve. Designed for use with boats, kayaks, jetskis, PWCs, etc, the protective sleeve can be used to protect most loads and cushions from rubbing of the tie down strap..
  • Made With Quality Durable Materials - High Grade Oxford Polyester Fabric with Heavy Duty Padding to cushion and act as a protector against damage. Reinforced hems are sewn into all edges, to ensure that these tie down sleeve covers last for many years..
  • The Aerofast Guarantee - We live and breathe tie down....
Check Stock