Top Radial Svm Reviews

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ...e combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in No....
Check Stock

Tormek SVM-00 Small Knife Holder for Use with SVM-45 Knife Jig / For Sharpening Small Blades

  • It's Width can Stabilize and Support Longer Blades.
Check Stock

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

Mickey Thompson ET Street R Racing Radial Tire - P275/50R15

  • Mickey Thompson ET Street R Racing Radial Tire - P275/50R15.
  • Tubeless “Radial Pro” technology to provide the ultimate traction.
  • Minimal tread void for the ultimate dry traction.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

Lotus Reinforced Heavy Duty Radial Tire Repair Patches (5-1/8'x6-1/8)

  • The lotus ZRP-35 four ply polyester reinforced radial tire repair patches. (10 Pack).
  • For use in prepared radial tire crown injuries up to 1″ (25mm).
  • Tools and vulcanizing chemicals not included..
  • Unique single direction nylon ply and locking wedge construction offers high strength and flexibility for all radial passenger, light truck and all commercial tire repairs..
  • Patch size 5-1/8″ X 6-1/8″. Heavy duty polyester reinforced plies..
Check Stock

Full set WANDA ATV/UTV Tires 25x8-12 Front & 25x10-12 Rear /6PR

  • Includes Four 30x10-14 Tusk Terrabite Radial 8 ply tires..
  • DOT test standard compliant (FMVSS 571.119) at max operating pressure. Radial, 8 Ply Rated Construction. Truck style tread for smooth ride on hard surfaces. Excellent off road performance. High load ratings for today’s larger machines. Tread depth: 3/4 inch. Medium/Hard terrain tire..
  • Please Note: The Terrabite can run slightly small for its size..
  • Construction type: Radial 8-Ply DOT Approved.
Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

  • INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

Four (4) Tusk TERRABITE Heavy Duty 8 Ply Radial UTV/ATV Tires - 30x10-15

  • Includes Four 30x10-15 Tusk Terrabite Radial 8 ply tires..
  • DOT test standard compliant (FMVSS 571.119) at max operating pressure. Radial, 8 Ply Rated Construction. Truck style tread for smooth ride on hard surfaces. Excellent off road performance. High load ratings for today’s larger machines. Tread depth: 3/4 inch. Medium/Hard terrain tire..
  • Please Note: The Terrabite can run slightly small for its size..
  • Please verify you have 15'' and not 14'' wheels before purchasing..
  • Construction type: Radial 8-Ply DOT Approved.
Check Stock

NSK 6806DD 6806-2RS Made in Japan 30x42X7MM High Speed Bearings Deep Groove Ball Bearings

  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • Single-row bearing for supporting radial loads.
  • Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Shields on both sides of the bearing to keep lubricant in and contaminants out.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Pendulux, Powerplant Wall Clock, Home Decoration

  • EARLY AIRCRAFT INSPIRED - First developed in 1904 for aircraft use, the radial engine became one of the most reliable means of power for aircraft from the First World War through the 2nd, and is still in use around the world today..
  • GORGEOUS RETRO DESIGN - Because their power to weight ratio was better than most inline engines, radial engines became more popular. Our Powerplant Engine Clock is representative of the type of radial engine found in US Aircraft from the 1920’s through the 1940's..
  • GIFT FOR SPECIAL OCCASIONS - You can give this wall clock as a gift for your friends, loved ones, vintage enthusiasts. Or keep it for yourself to enjoy..
  • PREMIUM QUALITY MATERIAL - Our wall clock is made with premium quality solid cast aluminum material. Durable, sturdy, and won't break easily..
  • ITEM DIMENSIONS - This wall clock measures 14 H x 14 W x 3 D inches, and weighs 7.6 lbs..
Check Stock