Top Radial Needle Roller Bearings Reviews

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400

  • Application:265 V8 1955-1957///267 V8 1979-1982///283 V8 1957-1967///302 V8 1967-1968///305 V8 1976-1986///307 V8 1968-1973///327 V8 1962-1969///350 V8 1967-1986///400 V8 1970-1980.
  • These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55″ valve springs..
  • Specially cast and machined for larger valve springs and retainers Light weight with integral pushrod seat.
  • Oversize trunions and full roller precision needle and cage bearings More needle bearings for increased performance and rocker life CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance H.D. Polylocks included.
Check Stock

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

Sliding Patio Door Tandem Roller Assembly,1-1/4 Inch Steel Ball Wheel Bearing 2 Pack

  • 【INCLUDES】 Includes 2 x Sliding Patio Door Roller, used for replacing damaged or missing roller assemblies on sliding patio doors.
  • 【STANDARD SIZE】The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter.
  • 【SOLID CONSTRUCTION】high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the....
  • 【EASY TO INSTALL】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly.
  • 【GUARANTEE】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us.
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

Andersen Patio Door Tandem Roller 1997061 (2 Pack)

  • 【Standard Size】Each sliding door tandem roller measures about 5/16-inch in wheel thickness (width) and 1-1/4-inch in diameter, a suitable size for replacing damaged or missing roller assemblies on sliding doors or windows..
  • 【Products Includes】2 × sliding patio door rollers, widely used for replacing damaged or missing roller assemblies on sliding patio doors, enough quantity for using in different doors at one time..
  • 【Solid & Durable Construction】The sliding door roller wheel is made of high quality material, stable and not easy to break, safe and reliable. High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG..
  • 【Easy to Install】This steel ball bearing roller is widely used to replace damaged or missing tandem roller assemblies in patio sliding glass doors, can be installed fast and effortlessly without extra tools..
  • 【Wide Application】The sliding door roller can be used on wood, extruded aluminum, vinyl patio doors, sliding glass door, screen door, sliding gate, window, vinyl patio doors, closet and more, is an indispensable accessory in daily life..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

uxcell CF12 Cam Follower KR30 Needle Roller Bearing, 30mm Roller Diameter, 14mm Roller Width, M12 Standard Stud 2pcs

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications.
  • Made of high rigidity bearing steel, more durable and longer working life.
  • Solid sealed. Preventing the entry of foreign matters like dust, this would extend the life of needle roller bearing.
  • It particularly suitable for the occasions when the radial space is limited.
Check Stock

uxcell CF8 Cam Follower KR19 Needle Roller Bearing, 19mm Roller Diameter, 11mm Roller Width, M8 Standard Stud 2pcs

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications.
  • Made of high rigidity bearing steel, more durable and longer working life.
  • Solid sealed. Preventing the entry of foreign matters like dust, this would extend the life of needle roller bearing.
  • It particularly suitable for the occasions when the radial space is limited.
Check Stock

uxcell 32005X Tapered Roller Bearing Cone with Cup, 25mm Inner Diameter 47mm OD 15mm Thickness for Freight Trailer

  • 32005X. Size: 25mm Inner Diameter 47mm Outside Diameter 15mm Thickness. 11000 r/m limited speed..
  • Made of high grade bearing steel, for heat tolerance and durability under heavy loads. 26KN basic static radial load rating (Cor) and 39.5KN basic dynamic load rating (Cr).
  • Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and loads..
  • Good rollers with fitted retainers, ensure the performance of less friction, vibration, and noise..
  • Static Load Rating of 39.5kN and Dynamic Load Rating of 26kN.
Check Stock

Timken HA590228 Front Wheel Bearing and Hub Assembly

  • ...MBLY: The integrated heavy-duty raceway reduces vibrations and increases stiffness, improving bearing performance and extending product life. The maintenance-free assembly with state-of-the-art housing is designed to protect the sensitive sensors and components from road hazards and potential damage.
  • RELY ON QUALITY BEARINGS: Timken Bearings feature precision tolerances, proprietary internal geometries, and quality materials. As the leading authority on tapered roller bearings, Timken applies their deep knowledge of metallurgy, tribology, and mechanical systems to improve the reliability and efficiency of friction-management automotive parts worldwide.
  • TRUST IN TIMKEN: What sets Timken apart is their technology and expertise in materials, friction management, and mechanical systems, not to mention their business capabilities that provide exceptional customer service at world-class efficiency levels and operational excellence. This leading supplier manufactures OE-quality, premium bearings, gear drives, belts, chains, couplings, lubrication systems, and related products.
Check Stock

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock