Top Race Bullet Mufflers Reviews

Doug's Headers DEC250A 2-1/2' Electric Exhaust Cut-Out

  • Stainless steel construction electric exhaust cut-outs in 2 1/2 inch and 3 inch diameters.
  • Rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal.
  • A pre-wired harness with an illuminated rocker switch is supplied for easy installation.
  • Un-cork your exhaust with the flip of a switch from you dash.
  • Ideal for race tracks that do not require mufflers.
Check Stock

Pair of Single Chamber Performance Race Muffler 3" Center / Center Universal Steel Muffler (3 Inch)

  • ▲ A pair of single chamber performance race mufflers..
  • ▲ 7 inches (about 17.8 cm) muffler body height, 3 inches (about 7.6 cm) muffler inlet diameter..
  • ▲ The chamber muffler is designed to create deep throat swelling and muffle exhaust noise..
  • ▲ The directional cabin is designed with aerodynamic flow to provide real racing performance and intense sound!.
  • ▲ High quality aluminized steel provides superior durability for any high performance and competition needs..
Check Stock

Doug's Headers DEC300AK 3" Electric Exhaust Cut-Out with Hook-Up Kit

  • Stainless steel construction electric exhaust cut-outs in 2 1/2 inch and 3 inch diameters.
  • Rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal.
  • A pre-wired harness with an illuminated rocker switch is supplied for easy installation.
  • Un-cork your exhaust with the flip of a switch from you dash.
  • Ideal for race tracks that do not require mufflers.
Check Stock

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3" CENTER INLET & OUTLET,BLACK

  • Brand New Flowmaster Super 44 Series Chambered Muffler, 3" Center Inlet & Outlet, Black (Holley Part #943045).
  • Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: Deep Aggressive Sound Exhaust Note | Noticeable interior resonance | Recent 2 chamber improvement | Race proven Delta Flow technology.
  • NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check Stock

Exhaust Muffler 2.5 Exhaust Tip 2.5x2.5x13 2.5 Inch Center Dual Offset Inlet/Outlet - 7 Oval Body Length Aluminized Steel

  • 7" Muffler Body Length, 13" Overall Length, 2.5" Muffler dual Inlet And Outlet Diameter.
  • Material: Aluminized Steel.Aluminized steel has a protective function, corrosion resistance and heat resistance..
  • Function:It increased throttle response, giving your car more air flow..
  • Advantage: Chambered mufflers are designed to produce a deep throaty rumble and muffle exhaust noise.
  • Super aggressive deep sound level, intended for off-road or race applications.
Check Stock

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH

  • Brand New Flowmaster Super 44 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #9430452).
  • Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: Race proven Delta Flow technology | Recent 2 chamber improvement | Noticeable interior resonance | Deep Aggressive Sound Exhaust Note.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,BLACK,3" OFFSET IN-CENTER OUT

  • Brand New Flowmaster Super 10 Series Chambered Muffler, Black Paint Finish, 3" Offset In & Center Out (Holley Part #843016).
  • Flowmaster Super 10 Series 409S Stainless Steel, Single Chamber mufflers are intended for customers who desire the loudest & most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver max performance. Super 10 Series mufflers are constructed of 16-gauge 409S stainless steel & fully MIG-welded..
  • Features: Flowmaster Reliability | 409SS Stainless Steel Construction | Super Aggressive Sound | Flowmaster Chambered Technology.
  • NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check Stock

Delkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers

  • Compatible with Delkevic street bike mufflers.
  • Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..
Check Stock

Superhot - PlayStation VR

  • Test your aim where only headshots take out enemies.
  • Race against your best scores in bullet-time and real-time.
  • Try to complete the game without shooting.
  • Get hardcore with faster enemies and less reaction time.
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

NEW B&M AUTOMATIC SHIFTER,PRO GATE,BLACK KNOB,REAR EXIT CABLE,COMPATIBLE WITH GM 4-SPEED TRANSMISSIONS

  • ... Automatic Shifter, Pro Gate, Black Knob, Rear Exit Cable, Compatible with GM 4-Speed Transmissions (Holley Part #80902).
  • B&M Pro Gate shifter is an externally gated race shifter for GM 4-speed auto transmissions. Features a 10-gauge black 304 stainless steel base with a 303 stainless steel shift pin for longevity & bullet-proof performance. The 1016 steel shift stick includes a black B&M logo shift knob for shifting duties while the external gate plate is constructed from black 11-gauge 304 stainless steel for durability..
  • The 4-speed gated forward shift pattern features a staggered shift pattern with positive stops between each gear. Thick injection-molded nylon side covers feature a knurled texture with the B&M Pro Gate logo on both sides. Covers are removable for access to the shifter sub-assembly & will not gum up with dirt affecting shift performance. Rear exit cable design includes a black 5-ft Super Duty race shifter cable along with cable bracket, shift lever & all necessary hardware for an easy install..
  • Features: Heavy 10-gauge 304 Stainless Steel Shifter Base Provides Ultimate Strength & Stability | High Impact Injection Molded Nylon Side Covers | 5-ft Super Duty Race Shift Cable | 304 Stainless Steel External Gate Plate Provides Durability ....
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock