Top Quiet Blower Fan Reviews

Hongso Replacement Fireplace Fan Blower & Heating Element for Heat Surge Electric Fireplace

Hongso Electric Fireplace Blower / Squirrel Fan & Heating Element.
➤Fits Heat Surge brand electric fireplace.
Total Width (Does not include Heating Element) = 10″, Depth = 3 1/2″, Height = 3″ Blower fan Size: Diameter 48mm x L:190mm.
Standard Setting Heats a 12′ x 13′ room. Motor UL Approved, Durable, Quiet and Efficient, Easy to install.
Note: Please measure the space for installing this blower in your Stove or Fireplace, and compared with the dimension of this blower. If you have any questions or concerns, please email us before ordering.

Check Stock

Englander Pellet Combustion Motor w Gasket PU-076002B

【Compatibility】➤ Replacement PU-076002B Combustion Exhaust Blower Fan for Englander Pellet Stove 10-CDV, 25-CAB80, 25-CB120, 25-CBEP, 25-CBPAH, 25-EP & 25-EPI (Evolution Pellet), 25-IP (Imperial Pellet), 25-PAF, 25-PAH (Pellet Auxiliary Heater), 25-PDV, 25-PDVC, 25-PDVE, 25-PDVP, 25-PFS, 25-PFSP, 25-PI, 25-SSP01, 49-SHC22, 49-TRC22 Models..
【Compatibility】➤ Replacement PU-076002B Combustion Exhaust Blower Fan for Englander Pellet Stove 55-SHP10, 55-SHP10L, 55-SHP15, 55-SHP20, 55-SHP22, 55-SHP22E, 55-SHP25, 55-SHPAH, 55-SHPCAB80, 55-SHPCB120, 55-SHPCBEP, 55-SHPCBPAH, 55-SHPEP, 55-SHPEPI, 55-SHPIP, 55-SHSSP01, 55-TRP10, 55-TRP15, 55-TRP20, 55-TRP22, 55-TRP25, 55-TRPAH, 55-TRPCAB80, 55-TRPCB120, 55-TRPCBEP, 55-TRPCBPAH, 55-TRPEP, 55-TRPEPI, 55-TRPIP, 55-TRSSP01 Models..
【The PU-076002B Exhaust Blower Motor Technical Specifications】★Volts: 115, ★Cycles: 60 Hz, ★Amps: 0.28, ★RPM: 3000. 【High Quality Bearing Motor】UL Certified, Powerful, Quiet, Energy Efficient and Long Lasting. 1 year warranty..
The Criditpid PU-076002B combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level..

Check Stock

Air King ASLC50 Advantage Exhaust Bath Fan with Light, White Finish

...he included adjustable hanging brackets UL Listed for installation over a tub or shower on a GFCI circuit 4".
Plastic damper protects against back drafts and ensures quiet operation.|4" plastic damper helps with back drafts and provides quiet operation|.
Bath fan with light designed to bring style to your home|50-CFM blower at 3.0-sone for quiet operation|Exhaust capacity for rooms of approximately 45 to 60-square feet|Easily installation by using the included adjustable hanging brackets..
Chic and unobtrusive grill comes with polycarbonate light lens that makes for easy re-lamping, and can be used with 100-watt maximum type A19 medium base incandescent bulb (not included)|Can be installed in two easy ways: installation via double-thick keyhole mounting tabs or the included adjustable hanging brackets|.
Specifications: HVI Certified CFM : @ .10 SP: 50 HVI Certified Sones : @ .10 SP: 3.0 Sound Level : Moderate ASHRAE 62.2 Ventilation : Local Exhaust Light Lens : Plastic Main Lighting : 100 Watts Duct Size :.
Specifications:4" round Collar/Damper : Plastic Mounting : Included hanger bars Effective Ventilation : Bathrooms up to 45 sq. ft., Other rooms up to 60 sq. ft..
Bath fan with light designed to bring style to your home.

Check Stock

Hipoilk GFK-160A GFK-160 Fireplace Blower Fan Kit for Heat & Glo Heat N Glo Heatilator Quadra-Fire GTI and Superior Fireplaces

Compatibility: Compatible with Heat N Glo DV3732, DV3732-B, SL-750TR-C, SL-750TR, SL-750TR-IPI-E, SL-750TR-D, 6000CLX, BE-36-C, SL-36, SL-550TR-C,....
Compatibility: Compatible with Heat N Glo 8000ARCH, 8000BE, 8000BEC, 8000C, 8000CAMP, 8000CBV, 8000CF, 8000CL, 8000 DVTFL, 8000G, 8000GBV, 8000GCF,....
Included With Purchase: This gfk-160a fireplace blower fan kit includes 160 CFM ball bearing blower assembly, full range rheostat variable speed....
Features Of The All Components: The gfk-160 blower kit comes standard with an superbly balanced, powerful and quiet 160 CFM blower. The gfk160a blower....
Fan GFK-160A Technical Specifications: L x W x H: 12 13/16" x 4 5/16" x 4 5/16" | Air Discharge= 4.75" each blower | 160 CFM, 2700 RPM, 120 Volts,....

Check Stock

Durablow MEF 10003H Amish Fireplace IR Heating Element Replacement Heater Parts for Heat Surge OEM/ODM (Blower Fan + Heating Element)

US Local Delivery. Fits Heat Surge brand electric fireplace series: Roll-n-Glow, Accent, Cozy, Curio insert, HT series, X5, X5A, X5B, X5C, X5C-S, X1, X3, X4..
UL listed. Durable, Quiet, Genuine NEW Factory parts.
Electrical Fireplace Blower Cross-Flow Squirrel Fan with heater. 100% same as Original parts, Durable, Quiet..
1350W, 120V Temperature Protecting PTC: 85 deg. Celsius / 185 deg. Fahrenheit.
Blower / Squirrel Fan + Far Infrared Heater / Heating Elements + Temp Switch.

Check Stock

bbq factory Replacement Fireplace Fan Blower + Heating Element for Heat Surge Electric Fireplace

Original parts from factory direct, UL listed, Durable, Quiet..
Blower fan Size: Diameter 48mm x L:190mm.
Temp Switch: 85 deg. Celsius / 185 deg. Fahrenheit.
Blower / Squirrel Fan + Far Infrared Heater / Heating Elements + Temp Switch.

Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
White Polymer Grille with 6-Inch round duct connector.
Low profile, white polymer or painted white enamel steel grille.
Single, impact-resistant centrifugal blower wheel.
20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.

Check Stock

DasMarine DC12V in-Line Marine Blower 270 CFM Intake: 4\ Marine Bilge Air Blower White

√ Little Noise: The noise is just the amount of air moving through the blower,the sound is very little compared to the amazing output and low amp draw..
√ Wide Application: The air blower allow the engine compartment, kitchen and bilge to be ventilated.It can be used as a defroster fan,also can cool down the amplifier installed on the boat,it can cool a amp rack and bathroom ventilation etc..
√ Six Blade Fan: Puts out plenty of air,ABS plastic,small but very strong quiet operation..
√ Easy to Install: With mounting stand,vertical or horizontal installation are both ok.
√ Package Included: 1 pack marine boat electric bilge air blower.

Check Stock

DEWALT DWOAS7BL Blower Attachment, Yellow/Black

【Battery Accessories】Cordless blower with a 2.0Ah battery can run approx. 15-20mins, an extra battery pack can be purchased from the Bielmeier store for the long blow time required..
【Ergonomic Design & Easy Using】Simply push the switch forward to start the blower and back off with one finger, comfortably holding it with the rubber-covered blower handle with no fatigue. This air blower can be set up in a few minutes from the box, enjoy your blower jobs quickly. It is compact and lightweight, only 3.65 lbs, great for small lawn care, dust and debris removal jobs around your home..
【Quiet & Convenient】 Have you been tired of the heavy and repetitive work of cleaning fallen leaves in the yard? This battery powered leaf blower not only reduces the burden for you intimately, but It is also cordless, battery-powered, relatively quiet, and durable. This is the best gift for parents with arthritis. Consider buying this leaf blower for yourself or your parents..
【2.16-Inch Flat Nozzle】Battery leaf blower too small nozzles tend to increase your working time, because the range they can blow is pitifully small. So we specially upgraded the opening of the nozzle! It allows you to blow more leaves or snow at a time, and more air volume, which can ....

Check Stock

Mr KAN GFk-160 Fireplace Blower Fan Kit for Heat N Glo Quadra Fire Hearth and Home Lennox Superior Regency Gas Fireplaces Fan for GFk-160A

[Improve Heat Distribution]: The Replacement GFK-160A Heat N Glo Fan Kit Can Move Heat Around The Whole Room, Powerful, Quiet, Energy Efficient and....
[Parts Include]: The Replacement Blower KIT Includes A Blower Unit, 3-Prong Power Cord, Variable Speed Control, Magnetic Thermostat, Installation....
[Model Features]: Blower Total Length = 12 7/8" Height = 4 1/4" Width = 4 1/4".
[Fit Models]: The GFK-160 Blower Fan Kit Fits Heat N Glo Moldes Series, Quadra-Fire Models, GTI Models, Heatilator Models.
[Important Note]: Before Ording, Please See Our Compatibility Chart in Description. Please Compare the Dimensions Listed With Your Original, to Ensure....

Check Stock

Air King AK80 Energy Star Quiet Series Bath Fan, 80-CFM

Exhaust fan grill's highest projection point is 1/2" down from ceiling and measures 11" wide x 13.75" deep.
housing measures 10-7/8" length x 9-3/8" wide x 7-7/8" deep.
Operates at 80 CFM at 1.5 sones, and easily installs with adjustable hanging brackets for 16" centers.
Electronically balanced centrifugal blower wheel provides top-notch ventilation with reduced sound.
Fan is made for continuous operation and can satisfy the needs of an 80 sq. ft. bathroom.
Comes with a 4" round connector with spring-loaded metal damper, offering superior protection against back drafts.
Energy Star high performance bath fan with low sound levels and a contoured grill.
80-CFM blower at 1.5-sone for quiet operation.
Exhaust capacity for rooms of approximately 80-square feet.
Easily install by using the included adjustable hanging brackets.

Check Stock

Replacement Fireplace Fan Blower and Heating Element for Heat Surge Electric Fireplace, Amish Fireplaces, Heater Element and Fan for Heat Surge ADL-2000M-X ADL-2000MX Electric Fireplace

Included With Purchase – Replacement blower and heating coil.
Specifications – Fan blower size: L 10″ x W 3.5″ x H 3″, Heater element size: L 8.27″ x W 1.38″, 1350W, 120V.
Heater fan assemble replacement for Heat Surge brand electric fireplace series: ADL-2000M-X, ADL-2000MX, Roll-N-Glow, Accent, Cozy, Curio insert, HT series, X5, X5A, X5B, X5C, X5C-S, X1, X3, X4..
Easy to install, excellent fit, very quiet running, worked perfectly..
IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. Any questions or concerns, please email us before ordering..

Check Stock

VICOOL Replacement Fireplace Fan Blower and Heating Element for Heat Surge Electric Fireplace

◆Include: Electric Fireplace Blower / Squirrel Fan, Heating Element..
Motor UL Approved, Durable, Quiet and Efficient.
◆Dimensions: Width (Does not include Heating Element) = 10″, Depth = 3 1/2″, Height = 3″.
Blower fan Size: Diameter 48mm x L:190mm.
Standard Setting Heats a 12′ x 13′ room.
◆The “Fits” BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order.

Check Stock