Top Quick Release Plate Reviews

NICEYRIG 15mm Shoulder Pad with Quick Release Baseplate for Manfrotto, 15mm Rod Clamp Applicable for Video Camcorder Camera DV/DC Support System DSLR Rig

The Camcorder Shoulder support kit is designed for poeple who keep long time shooting to help release pressure. The design of the 15mm shoulder pad integrates with ergonomics, which makes it very soft and comfortable. The shoulder pad improves stability on photographing. Plenty of room and holes for mounting balance weights, V-Mount batteries, etc. A great assisstant for you..
Quick release plate kit is mounted on 15mm shoulder pad with two 1/4 screw. Compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. So you could switch your shoulder-shoulder shooting to tripod shooting quickly..
There is off-rail prevention on the mounting baseplate, preventing QR plate from removal accidentally. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
The 15mm rod clamp also is mounted on the shoulder plate for you adding to your video rig..
Made of aluminum alloy and sponge, lightweight and durable. Net weight: 17oz.

Check Stock

LRONG 1Pc Tripod Quick Release Plate Camera Mounting Adapter Replacement for Quantaray, Sunpak 5800d 7000tm, Targus TG-P60T Tripod Mount QR-57, 4.3cm4.3cm

The square size of the bayonet of the quick release plate is 4.3cm*4.3cm/1.73in*1.73in. Please measure whether your gimbal is around 4.3cm*4.3cm/1.73in*1.73in..
This quick release plate is common to the following brands and models: Yunteng: 590 600 668 688 690 888 60 80 888.
Sony: D680 D580 VCT-50AV VCT-60AV VCT-80AV.
Admiralty: EX-638 CX-888 CX-460mini CX-460 CX-470 CX-570 CX-690 CX-444 DF-50..
The gimbal is equipped with a portable detachable quick-release plate, which can be easily removed and screwed on the camera before shooting, saving time and effort when hand-held shooting and shooting on a tripod are interchanged..
The standard 1/4 nut is firmly combined with the camera screw, and the bottom of the quick release plate can be reinforced with a coin..
Package content: 1 quick-release plate for tripod head, bayonet square size is 4.3cm*4.3cm/1.73in*1.73inch..

Check Stock

UTEBIT 50mm Arca Swiss Quick Release Plate Aluminum QR Clamp Adapter Set with 3/8'&1/4' Screw Hole and Built-in Bubble Level Compatible for Manfrotto DSLR Camera Tripod Ball Head Monopod

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm.
【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately..
【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant.
it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used..
【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography..
【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench. Please look carefully that the size suits yours..

Check Stock

SMALLRIG Quick Release Shoulder Plate for Sony VCT-14 Tripod Adapter with Rosettes - 2837

【Quick Release Design】SmallRig Shoulder Pad Pro 2837 is designed for SONY VCT-14 quick release baseplate, which fits the camera through a quick release plate for Manfrotto 501. Users can realize a rapid switch between shoulder shooting and tripod shooting through the shoulder pad..
【15mm LWS rod adapter】The front and rear ends of the dual rod system have a standard diameter of 15mm and a spacing of 60mm. Moreover, the front-end dual rod system can save 24mm for up-regulating, which can guarantee the spacing between the lens center of FX9, FS5, for URSA MINI, for CANON C300, and other devices to be 85mm as the standard..
【M6 Rosette】Both sides of the shoulder pad are standard M6 rosette mount, which can be installed with the original control handle of 1810 or FX9 machines..
【Center Gravity Adjustable】This item can be adjusted forward about 80mm through the built-in quick release plate in order to facilitate users to adjust the equipment’s center gravity and install the following focus and matte box.
the front two tubes can be adjusted together with the quick release plate, so there is no need to remove the equipment such as follow focus and matte box..
【Extra Mounting Points】The right side of 2837 is reserved with a 1/4 "-20 threaded....

Check Stock

SMALLRIG Universal Quick Release Tripod Adapter Plate for Sony VCT-14-2169

【FOR TRIPOD SHOOTING】The tripod adapter plate with V-wedge front is for Sony VCT-14 standard, you can use with standard VCT-14 shoulder plate,....
【SAFETY LOCKING SYSTEM】There is no slack and the camcorder is locked solidly to the baseplate since a spring-loaded rear pin is equipped to....
【QUICK RELEASE INSTALL】Features a safety release lever on the side for quick release, and it’s completely hands-free to lock into place.
【EXTRA MOUNTING HOLES】Comes with plenty of 1/4"-20 and 3/8"-16 threaded holes on the bottom for adapting different quick release plate.
【FULL-METAL CONSTRUCTION】All-metal construction is extremely solid, which reduces the potential risk of breaking. Meanwhile, the smooth coating....

Check Stock

SLIK Pro CF-834 4-Section 65' Carbon Fiber Tripod Black (615-923)

Ths Slik Quick Release Plate is a spare or replacement quick release plate for the DQ-10 quick release adapter, and the SBH-100 DQ and SBH-120 DQ Ballheads..
It features a 1/4 inch-20 camera screw and a secure cork pad..

Check Stock

BlackRapid RFH-1E0 Fastenr Tripod FR-T1 Black

Make your Manfrotto RC2 Quick Release Plate R-Strap ready with Manfrotto RC2 Quick Release Plates.
Eliminates the need to remove the quick-release plate.
Works with all current R-Strap models, allowing you to move between handheld.
Includes replacement bolt, C-clip, spacing washers and instructions.

Check Stock

Fiddler On the Roof

✅This MEKNIC Camera Quick Release Plate is a replacement camera plate that fits the Arca-type quick release element of ball head models. For camera....
✅Alloy aluminum material for this MEKNIC camera tripod mounting plate, Advanced CNC precision machine provide precise dimension to fit perfectly,....
✅Special anti-slip rubber pads enhance the grip between each plate and the mounted gear, and protect the gear from any damage due to mounting.....
✅Compatible with 1/4″-20 camera screw.Compatible with Standard for Tripod Ball Head for Camera Tripod Ballhead..
✅Two studs on the bottom of the plate help prevent the camera and plate from sliding all the way forward or backward out of the ball head, in case....

Check Stock

Dickies Men s Casual Leather Belt Black Ben 40

Compact in Size: these aluminium camera mount adapters are compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / Kangrinpoche /....
with Standard Anti-twist Locking Screw: the release plate camera mount locking screw has exquisite workmanship, compatible with 1/4''-20 camera screw.
Non-slip Design: the tripod adapter mount has special anti-slip rubber pads, which can enhance the grip between each plate and the mounted gear, and....
Easy to attach and detach: the universal quick release plate can be fixed to the camera base, which are convenient to use, help you save your time and....
Nice Workmanship: the quick release plate is made of aluminium alloy metal material and is processed by numerical control, the surface is finely....

Check Stock

Heavy Hands [Explicit]

EXTRA HEAVY DUTY & PORTABLE: The repair stand is made of aluminum with heavy duty alloy and strong head and clamps. It is light weighted, and compact when folded. It is very convenient, durable and well-designed. Max Bike weight: 50kg or 110 lbs.
HEIGHT ADJUSTED: Quick Release Adjustable (1m-1.5m or 39"-59" Fully extended). The height, tilt, and angle all have quick release with strong skewers. So that is very helpful to get the bike in the optimal working position for you..
ROTATED HEAD: Smart design: head rotated:360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 50 kg or110 lbs bike at any angle..
TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage..
DURABLE: It has been approved to be one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse..

Check Stock

iShoot Metal Tripod Mount Ring Camera Lens Replacement Foot Lens Collar Base Support Adapter Stand for Fuji XF 50-140mm F2.8 R LM OIS WR Telephoto Lens with Arca-Swiss Type Quick Release Plate

1. Specially designed for Fuji XF 50-140mm F2.8 R LM OIS WR Telephoto lens.
referring to and modified from Fuji original design, details are improved.
2. Bottom added the feature of quick release plate of 65mm long, reserved with 1/4 and 3/8 screw hole, more practical.
3. Made of Aviation aluminum, CNC precisely machined, anodized surface, with stainless steel non-slip locking screws and anti-skid nails.
the volume is about 66 x 52 x 65mm, net weight is about 105g.
4. iShoot Metal Tripod Mount Ring Camera Lens Replacement Foot Lens Collar Base Support Adapter Stand for Fuji XF 50-140mm F2.8 R LM OIS WR Telephoto Lens with Arca-Swiss Type Quick Release Plate.
5. Quick release plate is AS standard quick release plate feature, compatible with ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT standard ball head..

Check Stock

Lightweight Mini Fluid Video Tripod Head, EVUMO 360° Panoramic Compact Camera Video Head for Tripod DSLR Camcorder Telescope, with Quick Release Plates & Detachable Handle, Max Load 8.8lbs/4.0kg

...360° Panoramic Rotation】 The panoramic fluid tripod head provides smooth movements and fixed friction damping. Equipped with the aluminum alloy tilt locking knob, pan locking knob, and the handle, you can easily rotate the head 360° or tilt it from -45° to 90°, perfect for multiple-angle shooting..
✅【Quick Release Plate with 1/4” Screw】 The quick release plate compatible with Arca-Swiss is easy to install and remove. Attach the plate to your camera and quickly mount it on a tripod if needed. There is non-slip rubber padding on the quick release plate to ensure your equipment is securely mounted..
✅【4 Holes for Mounting Handle】The handle is detachable, and it can be used by backhand or forehand, left or right, enables you to get the best experience in overhead or elevation shot..
✅【Widely Applicable】3/8″screw holes at the bottom of the video head and easy to install tripod, monopod, camera slider and mini tripod. 1/4 inch quick release plate is for most DSLR cameras, DSLR and camcorders, easy to install and take down..

Check Stock

SmallRig R5 / R5 C / R6 Cage for Canon R5 R6 R5 C, Aluminum Alloy DSLR Rig Stabilizer with Cold Shoe , 1/4"-20 and 3/8"-16 Threaded Holes for Filmmaking , Video Shooting 2982B

...s 2070. The top comes with a cold shoe mount for microphones and LED lights. With 3/8"-16 locating holes for ARRI fit Top Handle 2165, Side Handle HSS2426 & 2914.
【Comfortable and Convenience】Built-in spanner removes bottom screws and can be slid out from the side without interfering with the attachment of quick release plate. The right-hand side is designed to fit camera handle for the original and comfortable grip feeling.
【Multiple Functions】Both sides and the bottom have strap holes , which works with Hand Strap PAC2456, Wrist Strap PSW2398 and Shoulder Strap PSC2428. Its left side supports Cable Clamp 2981.
【Built-in Quick Release Plate】The cage’s bottom quick release plate for Arca and 1/4""-20 threaded holes allow connecting the original RS2/RSC2/plate for Arca , which can be mounted onto RS 2/ RS C2 /RS 3 / RS 3 Pro quick release plate for Manfrotto and then onto stabilizer.

Check Stock