Top Quick Drill And Tap Tool Reviews

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

...inserts, carrying case, and instructions.
[Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
[Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
Includes bottom recesses for organizing the coils in included plastic bags.
[Easy to Use]: Remove your damaged thread by using an included twist drill bit.
Load the thread insert into installation tool.
Use the breaking pin tool to remove tang from insert.

Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

...speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us..

Check Stock

General Tools 715 Tap and Drill Reference Table

DOUBLE SIDED TOOL: This guide features a Tap Drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.
FRONT SIDE: Front side has a machine screw size tap drill chart for recommended 75% depth thread..
BACK SIDE: Features a decimal equivalents table in 64ths from 1/64" to 63/64"..
WORKS WITH: National Fine, National Course, American Standard Pipe and metric threads..
ESSENTIAL TOOL: Essential tap drill and decimal equivalents reference table for toolmakers, machinists and mechanics..
GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..

Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..

Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

...e wear-resistant and prolongs the service life..
13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..

Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
6:Self-centering point, do not need assistant center drilling or center punching..

Check Stock

NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set

3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..

Check Stock

XT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

30pcs thread repair tool kit: The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs..
High quality control: Made of precision high-speed steel for strength, wearproof and durability..
Easy to install: 1.Drilling - drill out the damaged threads using correctly sized drill bit provided 2.Tapping - Tap re-drilled hole using tap supplied (Cutting oil recommend) 3.Install the insert - place insert on installation tool and position the adjustable ring clockwise.4.Tang removal - remove the tang use the break tool..
Wide application: Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged..

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..

Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
Storage case is lightweight and durable for easy storage and is portable for all job environments.

Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

[Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
[Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
[Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
[Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
[Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..

Check Stock