Top Quick Disconnect Ball Valve Reviews

TMCRAFT 2.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing(10L)

STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
PORTABLE: 2.6 Gallon capacity can be stored and taken anywhere. Measures 8.9″L x 8.9″W x 14.6″H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..

Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....

Check Stock

1/2\ Ag Hydraulic Quick Connect Tractor Couplers with Dust Caps,Poppet Pioneer Style ISO 5675 Hydraulic Quick Coupler

2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps.
Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve.
The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241.
Most common quick connect couplers used in the agriculture, construction and logging industries.
Made by harden steel construction for superior corrosion resistance.

Check Stock

R410A R22 Valve Core Remover & Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for R404A R407C R134A R32 HVAC System

...---- The dual size 1/4" & 5/16" SAE valve core remover and install tool can adapt to R22/R134/R410/R32R air-condition, external bypass port design can remover valve cores. Works great for both Minisplit systems as well as 1/4" service valves on split systems..
EASY INSTALLATION ----- The Schrader's core grabber with disconnect valve, the tool can be easily inserted into the inner valve core for removal or installation. Built-in disconnect valve for easy operation, no need to stop the machine, no need to release the refrigerant..
PERFECT DESIGN ----- The valve core remover installer tool is made of pure copper.
The metal knob is all designed with anti-slip design. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve. (No Gas Loss)..
GREAT FUNCTION ----- Shut-off Ball value handle, metal schrader cap, schrader's core grabber tool, built-in magnet at the bottom base. Please close the valve and disconnect the air conditioner before removing the valve core..
2-YEAR WARRANTY ----- Order from SURIEEN, we offer 2-YEAR WARRANTY, true worry-free shopping experience. If you are not satisfied with the item please contact us ask for a replacement or refund in limited time. But....

Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.

Check Stock

275 Gallon IBC Tote - Rebottled (New Poly Bottle, Refurbished Metal Cage)

Rebottle (New Bottle, Refurbished Metal Cage).
2" Drain Ball Valve & 2" Quick Disconnect Camlock.

Check Stock

3/8\ Ag ISO 5675 Hydraulic Quick Connect Couplers with Dust Caps,Pioneer Style Hydraulic Coupler,3/8” NPT Thread and 3/8” ISO Body

2 sets 3/8" Ag hydraulic quick connect couplers,easy to connect and disconnect,with hydraulic coupler dust caps.
Body Size: 3/8″ ISO,Thread Size: 3/8″ NPT Thread, Poppet Valve.
The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal.
Most common quick connect couplers used in the agriculture, construction and logging industries.
Made by harden steel construction for superior corrosion resistance,with 4,000 PSI Rating,6 GPM NORMAL Flow,12.15 GPM Max Flow.

Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.

Check Stock

FERRODAY Ball Lock Keg Disconnect Quick Ball Lock MFL Disconnect Flared 5/16” Gas 1/4” Liquid Barbed Stainless Swivel Nuts for Corny Keg Post Ball Lock Keg Fittings for Homebrew with Clamps

【Ball Lock Disconnects for Beer Keg】 Barbed beer keg ball lock disconnect fittings with MFL swivel nuts for beer kegs connecting with other....
【1/4" and 5/16" Barbs Already Included】 Complete ball lock keg disconnect fitting comes with 5/16” barb for white disconnect to connecting gas....
【Long-Lasting Useful Keg Disconnect】 Classic ball lock keg fittings of safe materials, Strong ABS for main body, stainless steel for swivel nuts,....
【Universal Ball Lock Quick Disconnect】 For most ball lock home brew Kegs. Gray disconnect for gas post, black disconnect for liquid post. Perfect....
【No Leaks & No Regrets Purchase】 We have tested hundreds of times and no leaks! We are committed to offer you with high quality product as well as....

Check Stock

HPDAVV 5800psi Scuba Yolk Fill Station for HPA Tanks - Big Gauge - Aluminum Alloy Refill Adapter - for PCP Paintball HPA Filling Station - Yolk Charging System

Scuba Refill Adapter with a 8mm quick disconnect. Built for standard Scuba K-Valve, J-Valve and H-Valve..
Allows you to easily fill your HPA tanks from a scuba tank. Will work on any Scuba K Valve. High quality construction, an easy to read gauge, and simple use will keep you filling tanks for a long, long time..
Tank Pressure Gauge + Bleed Valve Female quick-disconnect.
This Fill Station can connection between the two cylinders takes only a few seconds..
Widely for fire-fighting, scuba shop, snorkeling dive system, PCP rifle and Paintball tanks for filling.

Check Stock

Kraken Aquatics Dry Snorkel | Quality Professional Snorkel Gear with Dry Top Valve, Comfortable Silicone Mouthpiece and Purge Valve for Scuba Diving, Snorkeling, Freediving, Spearfishing and Swimming

...ay when the mouthpiece is not being used..
Easily clear any water out of the dry snorkel with the one way purge valve: There may be times when water gets into your dry snorkel but it can easily be cleared out with the one way purge valve. Water can even be cleared out of the dry snorkel while under water..
Connect or disconnect your mask with ease using the quick release clip: The easy to use quick release clip makes it very easy to connect and disconnect your mask to the dry snorkel. The quick release clips also easily adjusts up and down for better fitment with your snorkel mask..

Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

...ve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass Fitting, 1 x Thread Seal Tape, 1 x Female Coupling. All packed in a durable clear storage case for easy organization, carrying and storage..

Check Stock

PERA Ball Lock Quick Disconnect Set Ball Lock Beer Quick Disconnect 1/4 MFL with 3/16 Swivel Nuts Hose Clamps for Beer Homebrew 4PCS

Include: Ball Lock Liquid Disconnect MFL,1/4 Swivel Nut (4 PACK), Hose clamps*4.
Material: PBT Material for Ball Lock Quick Disconnect and Stainless Steel Material for Swivel Nut.
Use: The Black Liquid Keg Coupler is for most Cornelius Keg, Pepsi Keg, and 7-UP tanks.
Connect:The Ball Lock Disconnect Barb Type fit 1/4" inside Diameter Beer Hose.
Guarantee: Quality Guarantee, any problem for Ball Lock Liquid Disconnect, Money Back or Replacement free..

Check Stock