Top Quick Connect To 6an Reviews

PQY 16 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 16 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10.
  • Package include:1x 16Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

PQY 10 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 10 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10 Oil Capacity: 0.24L.
  • Package include:1x 10Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

EVIL ENERGY 6AN Flare to 6AN ORB Male Fuel Rail Adapter Fitting Black 2Pcs

  • size:the thread size of 6AN is 9/16-18 UNF,the thread size of 6AN ORB is 9/16-18 UNF.
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring..
  • Material: The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.(Temperature Range: -40F° to +212F°.Maximum working pressure: 4000PSI).
  • The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc..
  • EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Straight Push Lock Hose Fitting End Black

  • Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF..
  • Material: made of aluminum alloy, reusable and recyclable..
  • Max pressure: 2000PSI, temperature range: -40℉ to 248℉..
  • Please attention that an6 push lock hose barb only compatible with rubber fuel line..
  • EVIL ENERGY provide 3 angles of 6an hose barb: straight, 45degree, 90degree..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit,AN6 Braided Nylon Fuel Hose CPE 10FT Black&Red

  • [Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft..
  • [Parameter] Working pressure:500psi,burst pressure:2000psi.
  • Temperature range:-40°F to 257°F(-40°C to 125°C).
  • [Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc..
  • [Material] Made of CPE synthetic rubber and nylon braided..
  • [Warranty] EVIL ENERGY provide 6an fuel line hose fitting kit 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

40T-Performance E85 Flex Fuel Sensor Mount/Bracket Bypass Module - Robust Mount For FULL FLOW from your E85 Flex Fuel Sensor to Fuel Rails - Solid 6061 Billet - 6AN and 8AN Fittings Included

  • ...ake your own bypass saving you time! Cean look install, with O-rings at all connections for robust leak free operation and no messing with single use crush washers. Keep it simple and avoid the risk of leaky fuel in an engine bay.
  • Have a V6 or V8? Run it as a splitter with 6AN feed to each rail to get the benefit of full equalized fuel pressure & flow to each rail for maximum performance. 8AN feed and 6AN split can support up to 1000 HP on e85. Compatible with any sensor with tube length 95 mm x 9.5 mm diameter incl. GM 13577429 / 13577379, AC Delco 13507128, Continental, VDO & AEM 30-2200 30-2201 sensors.
  • Solid 6061 Billet Alum construction Includes 6AN & 8AN in/out fittings, 6AN plugs and a 6AN fitting to use the module as a splitter. Includes all special seals and allen keys. You will need to adapt the module to your existing fuel system. DOES NOT INCLUDE SENSOR.
  • Ships with same day processing when ordered by 3 PM PST / 6 PM EST. Fast & FREE 1 - 3 day priority mail! Limited time new release pricing! Hassle free 1 year warranty against any defects. We encourage questions and are always happy to take care o....
Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • ...rance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

  • Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
  • Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
  • Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
  • Package Inclued: 2 pcs x 6AN straight swivel hose ends.
  • EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Fuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion

  • Fuel filter & pressure regulator for LS swap with no adapter fittings required..
  • 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions..
  • Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets..
  • Connect directly to your -6AN hose or hard line..
  • For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application..
Check Stock