Top Qd2rsnap On Reviews

Broken Wings Patch Small - 5x1.75 inch

  • Broken Wings Patch Small measures 5x1.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your l....
Check Stock

Alpena 58260 VR Carbon Wheel Cover Kit - Black - 16-Inch - Pack of 4

  • Fit on snap on type or pop on type 16-Inches steel wheel only. NOT fit on size other than 16-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as a complete set of 4 x 16-Inches Hubcaps - Matte black finish.
Check Stock

Oakland Patch - 4x1 inch. Embroidered Iron on Patch

  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to....
Check Stock

1789 2nd Second Amendment Homeland Security Womens Pink Embroidered Patch

  • 2nd Amendment Rocker Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your ....
Check Stock

John Deere Brand Sales and Service Equipment Snapback Hat Olive

  • Large gear shape screen-printed reading Sales and Service Equipment along with John Deere embroidered on front.
  • Contrast colored mesh back and classic logo patch on side.
Check Stock

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • Chicago City Flag Patch measures 3x2 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leath....
Check Stock

HTVRONT Iron on Patches for Clothing Repair, Fabric Patches Iron on, Black White Gray Beige Brown Repair Decorating Kit 20 Pieces Iron on Patch Size 3.7\ by 4.9\ (9.5 cm x 12.5 cm)

  • 【GREAT STICKINESS & DURABLE】: Our iron on patches is soft and made of nylon material. 30% more glue than other iron on patches for clothing , which could be machine washed and makes it through multiple washes, still remains its strongness and durability. Perfectly merged with your restored items without any falling off and fading after washing..
  • 【NO RESIDUE & BAD SMELL】 Using a scissors or cutting machine to cut the size you need to repair. Place the iron on patches for clothing on the garment with iron for heavy pressure or heat press for middle presure. Only few minutes will take for inside & outside reinforced. Simply reironed the corners to make the iron on patch firm and no residue left..
  • 【WIDE APPLICATIONS】 Iron on patches are ideal for the weak spot on the garments as well create different dress styles. Iron on patches for clothing repair can not only be applied on jeans, but also t-shirts,hats,shoes,,socks,clothing and so on. Restoring the holes or worn out could prolong the life of the clothes and make you look more unique.Fabric patch-Your favorate garments saver..
  • 【DIMENSIONS & COLORS】 Compared with other iron on patches，our size of iron on patches for clothing :20 pack(black,white,gray,beige,brown)-3.7" by 4.9" will help to....
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • Game Over Marriage Patch Medium measures 3x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • Machine Gun Bunny Rabbit Patch measures 3.1x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorc....
Check Stock

FANMATS 17172 New York Rangers Embroidered Head Rest Cover Set - 2 Pieces

  • The team logo is embroidered one side in team colors and the other side features the team name on a mesh material.
  • Made of comfortable material - mesh on one side and soft polyester on the other.
  • Logo is embroidered on one side and the team name is embroidered on the other.
  • Elastic band ensures a snug fit, so instillation is a breeze.
Check Stock

Goo Gone Oven and Grill Cleaner - 14 Ounce - Removes Tough Baked On Grease and Food Spills Surface Safe

  • Stay-in-place foam clings to surfaces and does the hard work making it easy to use.
  • Easy - makes clean up and maintaining your surfaces a breeze.
  • Multi-Use/ Multi Surface - use on ovens, indoor/outdoor grills and more, do not use on aluminum or faux stainless steel.
  • No Fumes - most oven cleaners contain hazardous chemicals or harmful fumes you need a safer oven cleaner that quickly works on tough baked-on grease and food spills in your oven.
  • Surface Safe - penetrates and breaks down tough burnt-on carbon deposits, loosening the bond, without harming the surface of your oven.
  • Most oven cleaners contain hazardous chemicals or harmful fumes you need a safer oven cleaner that quickly works on tough baked-on grease and food spills in your oven.
  • A dirty oven can lead to excessive smoke bellowing out, can add a charcoal taste to food, and is potentially hazardous.
  • goo gone, the no.1 trusted brand for cleaning sticky, gummy, gooey messes.
  • Goo gone oven and grill cleaner penetrates and breaks down tough burnt-on carbon deposits, loosening the bond, without harming the surface of your oven.
  • The grease-cutting foam clings to vertical and horizontal surfaces and breaks down baked-on, burnt-on, stuck-on grease quickly Just spray it on and the foam begins to work on the gr....
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • Respect is Earned Loyalty is Returned Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock

I'm Your Huckleberry Black White Patch - 3x3 inch - Embroidered Iron on Patch

  • I'm Your Huckleberry Black White Patch measures 3x3 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will sc....
Check Stock