Top Pvc Wpc Production Line Reviews

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

  • Robust 60 WPC output at 4 ohms, 40 WPC output at 8 ohms.
  • Independent and bus inputs enable unparalleled flexibility.
  • Bridgeable channel outputs provide additional power when needed.
  • Independent channel gain controls allow the output of each speaker to be perfectly matched.
  • Multi-stage protection circuitry for reliability and easy troubleshooting of audio system.
Check Stock

MantisTol LVT-330 13 Pro Vinyl floor cutter for VCT,LVT PVC LVP WPC and Rigid Core Vinyl Plank.Best Buy!

  • Design for cutting LVP,LVT,VCT,WPC,PVC,Luxury Vinyl Planks. Cutting unapproved materials will void warranty. Not for business； For home indoor DIY....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly....
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
Check Stock

CUTTEREX 13 Professional Laminate Floor Cutter Vinyl Floor Cutter for VCT LVT SPC PVC LVP WPC Rubber Floor and Rigid Core Vinyl Plank with Knee Pads

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" or 330mm Width, Up to 5/8" or 15.80mm Thickness on Engineered Wood Floor, VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor, Vinyl Plank Floor and Rigid Core Vinyl Plank, also Cuts PVC Tile, Vinyl Tile, Fiber-Cement Board Siding, Vinyl Siding, Pressboard Lap Siding, Carpet Tile, Leather, Rubber Base, Rubber Tile, Soft Plastic.
  • ✅OUTSTANDING VALUE: No Dust, No Noise, No Electricity Needed, Easy and Professional Cutting on Vinyl Floor, NO Go Out and In House, NO Go Up and Down Stairs, Time and Labor Saver..
  • ✅SAFE OPERATION: Includes CUTTEREX Knee Pads, Stay Protected, Stay Safe! Dust Free, Quick & Quiet. Long Handle for More Cutting Power Made Operation Easy..
  • ✅CUTS MOST SHAPES ON FLOOR: Straight Cut and Cuts at 0-45° Free Angles.
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Angle Indications on Support Table, Integrated Straight Cutting Fence..
Check Stock

Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier with Sub Frequency Adjustment

  • Robust 60 WPC output at 4 ohms, 40 WPC output at 8 ohms.
  • Independent and bus inputs enable unparalleled flexibility.
  • Bridgeable channel outputs provide additional power when needed.
  • Independent channel gain controls allow the output of each speaker to be perfectly matched.
  • Multi-stage protection circuitry for reliability and easy troubleshooting of audio system.
Check Stock

MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate Carpet tile Siding,Rigid Core Vinyl Plank and more；You are worth buying！

  • For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
  • The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
  • A shear blade , included a 600 Grit oilstone to keep sharp..
  • Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....
Check Stock

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

  • Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
  • 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
  • If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....
Check Stock

vidaXL Patio Dining Set 3 Piece Garden Dinner Dinette Table Chair Balcony Backyard Terrace Outdoor Home Decor Seating Furniture Black and Brown

  • This garden dining set is an excellent choice for your garden, patio or terrace.
  • The garden chair is made of PE rattan, making it weather-resistant and durable.
  • The brown WPC armrests add to the chairs' stylish look.
  • The table features a glass tabletop with simple line, which is easy to clean and suitable for outdoor use.
  • The aluminum frames also ensure the stability and sturdiness for this set.
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

EJ's SUPER CAR Car Interior Moulding Trim, 16FT (5M) Color Film Car Interior Exterior Decoration Moulding Trim Rubber Seal Protector Fit for Most Car(Red)

  • ...or,Embedded Mounted in Your Car Interior Trim,And Will Not Cause Damage To The Car Surface,Super Flexible, Beautify The Appearance and Stickers Interior Car,Can Prevent The Ash Layer Into The Gap Is Difficult To Clean Up The Cause Not Beautiful..
  • High Quality PVC Materials,The Use of Environmental Protection,For the Production of PVC Soft Plastic Paste Performance is Super Elasticity,Metal Reflective Radiation Processing,Soft Material,Shock Absorption To Sound.Perfect Car Interior Decorations Makes this Easy to Install Over the Hard to Reach Places..
  • Unique Function Moulding Trim Strip-Flexible Shape to Decorate Your Car Interior Trim.Waterproof, isolator noise, corrosion resistance, high temperature resistance, wear resistance, anti-aging, UV resistance..
  • Car Interior Trim,Direct replacement.Is Suitable Decoration To The Intake Grille,Tail Lamp Decoration,Headlamps Decoration,Wheel Cover Decoration Article,Side Air Vents,Trimming The Lip Around The Pipeline.Great For Both Interior&Exterior Decorating of Your Car,Universal Fit All Car..
  • The Car Interior Moulding Trim Decor Strip Decorative Line equipped with specialized installation toolsYellow Mounting ScraperHelp you install more easily.We will solve any problems you encounter,Please contact us by emai....
Check Stock

60Pcs Cutting Wheel Set for Rotary Tool, Mini HSS Saw Blades Cutter, Resin Cut Off Wheels Disc, Diamond Cutting Kit with Mandrels for Wood Metal Glass Plastic Stone

  • Widely used. Covers all the bases with quality products at a price any operator can afford. Ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. Compatible with electric grinders, electric drills, hanging grinders, etc..
  • Resin cutting wheels: With low heat generation and thin cutting line, they are used to cut iron, aluminum, chassis modification, thin metal circuit board, and DIY production after connected with mandrels..
  • HSS saw blades: High-speed steel and 6 kinds of outer diameters 22/25/32/35/44/50mm. Suitable for cutting wood, plastic, PVC pipe, etc..
  • Diamond cutting wheels: Made of high-quality diamond. With high cutting efficiency, high durability, stable quality. Suitable for cutting gems, jade, brick, marble, glass, etc..
  • Attention: For your safety, please wear gloves and goggles when operating. It may become scorching hot when using diamond cutting wheels. Please add some water to keep it cool..
Check Stock

Toslink Digital Optical Audio Cable, Home Theater Fiber Optic, Toslink to Mini Plug 3.5mm Cable Optical Plug Wire Cord with Metal Connectors & Strain-Relief PVC Jacket(1M)

  • [Noise Isolation] The toslink digital optical audio cable can achieve electrical isolation and prevent digital noise from transmitting through the ground line, which helps to improve the DAC SNR..
  • [High Sound Fidelity] Low-loss, low-jitter, maximum signal transfer. Get a clear, smooth sound with more details..
  • [PVC Jacket Production] PVC jacket contributes to the OD6.0mm strain-relief construction that not only provides flexibility, but also protects the cable from kinks. Gold Plated Connector Resist corrosion, reduce tarnish, and provide maximum protection for the fiber tip..
  • [Good Quality] Full-size male TOSLINK to 3.5mm mini male TOSLINK optical audio cable, 250M bit/s transmission bandwidth..
  • [Wide Application] DVD, amplifier, TV, sound card, decoder, CD player, notebook, speaker with round SPDIF output, perfect for home theater system..
Check Stock