Top Pvc Injection Mould Reviews

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

Geekpure 10 Inch Reverse Osmosis RO Filter Housing -1/4 Port-Fit for 2.5 x10 Filters

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

ProTaper Race Line 2.0 Square Handlebar Pads - USA

  • The SX pad features an injection molded foam which offers better impact protection and significantly increases the life span.
  • Also improved is the fit on the cross brace which helps decrease movement during use.
  • High-density, injection molded foam to reduce rider injury.
  • Durable PVC cover with power-wash proof permanent graphics.
  • Velcro fastening and extremely lightweight.
Check Stock

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

FGDFGDG Muay Thai Microfiber Leather Boxing Gloves Adult Kids Women Men Gym Training Grant Boxing Equipments Boxing Training Gloves,Green,12oz

  • HIGH QUALITY: Quality PU Leather construction for great durability and performance, also easy to clean and maintain. Pro Design for Boxing, Kickboxing, Muay Thai, Sparring Training..
  • SUPERIOR COMFORT: Keeps your hand dry, Pre-curved anatomic hand design allowing for proper fist closure and maintaining focus while training.
  • BEST SUPPORT & PROTECTION: Widened helps add more stability to the wrist and makes it much easier as you throw punches, allows for shock absorption, gives the best protection for both you and your partner.
  • SECURE HOOK DESIGN: Constructed to fit the natural curvature of the hand for proper fist closure while striking..
  • Spar with a partner, or throw punches at a dummy, whatever training you have in mind, these injection mould gloves are perfect for you..
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock