Top Push on Hose Barbs Reviews

Rain Barrel Connector Kit

  • Includes two stainless steel hose clamps, one 3' long x 3/4" diameter hose, two poly hose barbs, and two 1/2" bulk head assemblies.
Check Stock

Garden Hose Repair Kit 5/8 Inch Fittings Mender 3/4 Male and Female Water Hose End Replacement Set Connector with Zinc Clamp

  • ⌘【Heavy Duty】: These 5/8 garden hose repair fittings can fix and secure the ends of damaged hoses for continued use in garden hose assemblies..
  • ⌘【Leak Resistant Duty】: This garden hose mender has raised ridges (or barbs) on one end of the fitting that hold it firmly in place when it is inserted into the damaged hose, creating a leak-resistant seal..
  • ⌘【Material】: Water hose repair kit connectors are made of brass, and the clamps are made of stainless steel..
  • ⌘【Easy to Use】: Easy to connect and disconnect, male hose end repair can be uses to repair and connect the garden hose ends. Fit for ⅝" or ¾" hose fittings..
  • ⌘【Package Include】: 4 sets male and female hose end repair connector with clamp, extra 8 pack garden hose washers..
Check Stock

ACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit

  • Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
  • Hinders water line backflow to lessen water pump damage.
  • Large rubber tip for radiator necks and direct flushing of the engine block.
  • Small rubber tip on the whip hose for direct access to the heater core tube stubs.
  • 5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.
Check Stock

Gardrip 60 Pieces Drip Irrigation Elbow Fittings for 1/4 Inch Drip Tubing Barbed Elbow Corner 90 Connectors for Irrigation or Sprinkler Systems

  • 【Package Quantity】: Package includes 60 pieces of elbow hose connectors, which let you connect your irrigation systems as you wish.
  • 【Barbed Design】: The barbed ends grab tubing, which makes the tube connection more firm, and not easy to fall off, ensure a secure leak-proof connection..
  • 【Material】: The drip line elbows are made of high quality engineering plastics, solid and durable, ensure years of using..
  • 【Easy to Install】: It is easy to install without any glue, tools or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak..
  • 【Wide Application】: These elbow fittings are suitable for garden, lawn, greenhouse, patio and other watering drip irrigation system..
Check Stock

Tippmann Camoflauge Decal Kit for A-5

  • Fitting is compatible with 1/8" INTERIOR DIAMETER Hose.
  • Fitting is NOT compatible with 1/16" INTERIOR DIAMETER Hose.
Check Stock

TSTabc Inline beer filter Home Brewing Hose Barb in-Line Strainer 180 micron 80 mesh Water & Beer Filtering White

  • Removes sediment.Perfect for large batches and dry hopped beers..
  • No Taste-spoiling aeration or chemicals. Save time and beer..
  • Include 6 hose barbs 1/2"(12mm) hose barb, 3/8"(9mm)hose barb, 1/4"(6mm)hose barb available..
  • Screen: 180 micron / 80 mesh Max Operating Temperature: 65C/150F Max Operating Pressure: up to 150 psi.
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes:2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose(Fit hose witch inner diameter of 10mm),The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

Dixon PTLS10040 FNPT Poly T-Line Strainer, 40 Mesh, 1\ ID, Polypropylene

  • Improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins..
  • Saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
  • Made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉..
  • Easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
  • Perfect for large batches and dry hopped beers. Include 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..
Check Stock

LDR 515 B5003S Braided Vinyl Hose Tubing, 1/2-Inch ID X 3/4-Inch OD, Clear, 100-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

LDR 515 B5002S Braided Vinyl Hose Tubing, 3/8-Inch ID X 5/8-Inch OD, Clear, 150-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

Dixon BPM4 Brass Push On Fitting, Hose Mender, 1/2\ Hose ID Barbed

  • Push-on fittings are intended for use with lok-on (push-on style) hose only.
Check Stock

Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS

  • Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
  • How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
  • If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
  • Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..
Check Stock