Top Push Rod Bushing Reviews

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

Camco Aluminum Anode Rod - Extends the Life of Your Water Heater Tank by Absorbing Corrosion Causing Particles - (11582)

  • Sacrificial Rod: Anode Rod extends the life of your water heater tank.
  • water corrodes the rod rather than your steel tank.
Check Stock

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair 2X - Includes Wiring Diagram

  • High Quality CTS Push Pull Pot - brass bushing and shaft.
  • Short Shaft (3/8" bushing height), 24-tooth fine spline shaft.
  • Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting.
  • Not intended for use with import guitars using metric components.
Check Stock

onlyfire 6002 Rotisserie Meat Forks 1-Pair for Grills-Fits 1/2-Inch Hexagon & 3/8-Inch and 5/16-Inch Square Spit Rods

  • Electric motor with waterproof on/off switch and auto reverse function. Cable length:36”..
  • Includes three steel rotisserie spit rod ( spit rod A:10",spit rod B:22.75",spit rod C:22.75"), counter balance, spit rod bushing,heavy duty 4-prong....
  • The onlyfire rotisserie kit comes with universal and OEM bracket set fits for Broil King, Broil Mate, Sterling, and GrillPro grills. It is a hassle....
  • Unique counter balance system included for rotisserie operation of unbalanced loads. Counterbalance for smooth turning and less motor wear..
  • Universal rotisserie kit, 45” x 1/2'' hexagon spit rod fits most grills with a cookbox up to 39" wide. 53” x 1/2'' hexagon spit rod fits most....
Check Stock

Belltech 9148 Nitro Drop 2 Shock Set

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

Belltech 444SP Lowering Kit with Street Performance Shocks

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

Longacre® 52-32700 Standard Carb Throttle Linkage Kit, 23-1/4

  • Kit includes 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts.
  • You just bend to clear air cleaner, cut to length, thread one end (requires 1/4"-28 tap).
  • It easily forms to any car or use straight.
  • The 6061 T6 Heat treated aluminum alloy is tough to bend but stays to shape in use.
  • Throttle rod length is 23-1/4" and has a 1/4"-28 RH thread pitch.
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Nickel KEDPNCL3-N

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Nickel KEDPNCL3-N.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press

  • Assemble and disassemble pen parts on one easy to use tool.
  • Acts as traditional pen press to press your pen parts together.
  • Disassembly function provides invaluable way to take virtually any pen apart.
  • Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
  • Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning.
  • Sled mechanism slides the stop into position.
  • Locking lever then securely locks the rod in place.
  • The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips.
  • Dedicated 7mm bushing allows for disassembly of any 7mm pen.
  • Soft-grip tube and V-profile clamp provides parts protection during disassembly process.
Check Stock

Belltech 8504 Pair of Rear Nitro Drop 2 Shock Absorbers for Silverado Colorado Sierra Ram Tradesman 4WD RWD

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

SuperATV Heavy Duty Tie Rod Kit for Polaris Ranger XP 900 / Crew (2013+) - Complete with Chromoly Ends - Stock Length Replacement

  • ✔️【Fits】Compatible with 2016+ Honda Pioneer 1000 / 1000-5 | NOTE: Models with 12" wheels will require a 1" wheel spacer.
  • 【Reliable and Strong】The Honda Pioneer 1000 is a powerhouse that pushes parts hard, so get SuperATV’s Heavy-Duty Tie Rod Kit to get parts that are up to the task. Our tie rod kit has knuckle-to-knuckle strength to keep you in control through every obstacle..
  • 【Swaged Tubes are Stronger】Made with swaged 4142 chromoly steel alloy to make this kit as strong as possible. The swaged design prevents bending or shearing much better than standard straight rods..
  • 【Kit Includes】Swagged tie rod shafts, tie rod ends, inner ball and sockets, all boots and zip ties, and misalignment bushing hardware..
  • 【Ride with Confidence】Our kit is built to match the tank-like strength of your Pioneer 1000 or 1000-5 because we know how dangerous breaking a tie rod end can be. Ride safer and stronger with our heavy duty tie rod end kit..
Check Stock